INTRODUCTION

We thank you and congratulate you for having chosen us.

Deseamos que disfrute de conducir una MX260 (KR260GY)
now that he is one of the proud owners of a mo-
bicycle
KELLER. We are sure that it will give you a lot of satisfaction.

This manual describes the features of the motorcycle, and

include the necessary instructions for you to have a
better understanding of the controls and their operation. You
we recommend READING THIS MANUAL CAREFULLY BEFORE
DRIVING A VEHICLE FOR THE FIRST TIME. The correct one
operation and the proper compliance with the cui standards
Given and maintenance, it guarantees you to obtain a greater se-
safety in driving and a notable minimization of
defects and accidents, which will help to increase life
useful for your motorcycle and will ensure that your unit is always
in condition, ready to be driven.

Remember that we are always ready to provide

to provide advice regarding management or for the service
of maintenance.
 INDEX OF ICONS

WARNING
The information, the images, and the specifications contained
Indicate the necessary actions that are
Inside the manual, they are based on the most recent data.
they must follow to avoid injuries while driving
about the product available at the time of publication
or to people who are inspecting
Due to possible modifications that may have occurred.
the motorcycle
or improvements, there may be differences between the vehicles
butts and this manual. Mediterranean Industrial Entrepreneurship
neo S.A. reserves the right to make changes to
CAUTION
any moment, without the need to notify it.
Warns about the operation that must be
take action to prevent any harm to your per-
sound or on your motorcycle
Publication year 2011
MEDITERRANEAN INDUSTRIAL ENTREPRENEURSHIP S.A.
USEFUL INFORMATION
Industrial plant: Av. la voz del interior 6926
Provides useful information related to the
Córdoba – Argentina
actions that must be addressed clearly
TEL: 0351 – 4751775-4751776
mind
www.motoskeller.com.ar

It is important that you know the chassis and engine numbers.

they are used to identify the vehicle and for ALWAYS USE A HELMET
such consultations as, for example, the purchase of spare parts oe- For your safety, and that of your passengers.
guarantee executions. Please check carefully the we always recommend the use of a helmet
vehicle data that you have acquired. to drive the motorcycle
TABLE OF CONTENTS

INTRODUCTION 1 VEHICLE DESCRIPTION

INDEX OF ICONS 2 1. Components 9

2. VIN registration 10
TABLE OF CONTENTS 3 3. Fuel loading 11

TECHNICAL SPECIFICATIONS 5

USER GUIDE
SAFETY IN DRIVING
Pre-driving inspection 12
1. Tips for your safety: 2. Engine start 12
Before driving 6 Engine mounting 12
During the handling 6 4. Driving 13
2. Protection elements 6 5. Braking: warning 13
Modifications or replacement of parts 6. Engine shutdown 13
components 7
4. Load attachment and accessories 7
REVISION, ADJUSTMENT AND MAINTENANCE 15. Suspensions
Front suspension 20
Motor oil Rear suspension 21
Engine oil check 14 16. Periodic maintenance table 22
Engine oil change 14
Oil pan cleaning 15 WARRANTY
2. Tires: pressure 15
3. Spark plug inspection or replacement 15 1. General warranty conditions 23
4. Review and cleaning of the gasoline filter 16 2. Necessary requirements for the claim
5. Review and cleaning of the air filter 16 of the warranty 23
6. Throttle cable adjustment 16 3. Exclusions of the warranty 24
7. Carburetor adjustment 17 4. Conditions of nullity
8. Review and adjustment of valve clearance 17 of the warranty 24
9. Brake inspection 5. Limitations of the warranty 25
Brake adjustment 17
10. Battery review 18 6. Service coupons
11. Fuse replacement 18 Certificate of delivery in conformity 27
12. Motorcycle cleaning 19 Statement of knowledge of the warranty 28
13. Procedure during the
storage 19
14. Commissioning after
storage 20
TECHNICAL SPECIFICATIONS KR260GY
MOTOR
• Type: Single-cylinder 4-stroke, water-cooled, 4 valves DOHC
Cubic capacity: 254.1 cc
Diameter and stroke: 70 mm x 66 mm
Torque: 22 Nm at 7,000 +/- 500 rpm
Power: 25 Hp at 9000 +/- 500 rpm
On Electronic by CDI.
Startup: Electric.

CHASSIS AND SUSPENSION

• Neumáticos: Forward: 80/100 x 21”
Rear: 110/100 x 18"
• Frenos: - Delantero: Hydraulic drive ventilated disc with 2 pistons.
Back: Ventilated disc with hydraulic drive of 1 piston.
• Suspensiones: - Delantera: Adjustable hydraulic inverted telescopic fork.
Rear: Gas shock absorber coil with adjustable double action.
DIMENSIONS
Dimensions: (I/h/a): 2184x832x1260 mm
Wheelbase: 1498 mm
• Peso: 125 Kg.
ELECTRICITY
Electric system: 12v
• Batería: 12v - 6.5 Ah
POWER TRANSMISSION
Transmission: 6-speed manual
Clutch: Manual multidisc in oil bath.
 DRIVING SAFETY
IT IS TOTALLY PROHIBITED TO THE CIRCU-
THIS SEES-
LACACTION ON THE PUBLIC ROAD WITH DURING THE HANDLING
HEREULO. EXCLUSIVELY FOR USE IN • Become well acquainted with the braking systems. Use both.
CIR PLACES AND THINGS TO BE I am at the- front and rear brakes, to avoid losing control of the
TORHOISTED. vehicle.
Pay maximum attention and drive at a lower speed.
Get to know thedetailed requirements to continue Situation: dad in adverse weather conditions (rain,
wind, low visibility.
1. CONSE JUST FOR YOUR SAFETY Do not exceed speed limits that put at risk
its conductive capacity and take into account the conditions
-ANDRIVING TEST: existing climate and terrain conditions to avoid possible
Ensure to be qualified for the with reduction of accidents or even injuries.
the motorcyclebike and to know all its functions nes of con- Always drive well seated and keep both
troll hands on the handlebars and both feet on the footrests.
Know the abilities and limitations that he/she has his/her THE TRANSPORT OF PASSENGERS IS NOT ALLOWED.
vehicle.
Always carry the documentation that the Titleholder believes
vehicle loyalty.
Do not overload the vehicle. you exceed the limit
of kilograms established in this manual.
This vehiclethe article does not allow loads apart from the conductor. 2. PROTECTION ELEMENTS
Always conduct the REVIEWS OF SECURITY. Ins-
please the motorcycle before putting in march her ALWAYS WEAR A HELMET.
motor, in this way you can avoid accidents or
damage to the vehicle. Check the functioning of
the brakes before driving.
 4. LOAD AGGREGATE AND ACCESSORIES
It is recommended to use a face shield and gloves to
drive, if you wish. Remember that the performance of the motorcycle
Wear garments that completely cover the legs, since can be reduced due to: access installation
the escape system during use and remains thus unmanufactured rivers by the company inappropriate loads
for a while after stopping the engine. jokes, worn tires, general condition of
Avoid wearing loose or baggy clothing, which can be the motorcycle, poorly maintained roads or bad weather. These
trapped in the control lever, the ignition lever General guidelines will help you decide how
that supports the feet or the wheels and causes an accident- equipping your motorcycle and how to load it safely
tooth. dad.

3. MODIFICATION OR REPLACEMENT OF PARTS LOAD

COMPONENTS DO NOT LOAD THIS UNIT, IT IS DESIGNED
ONLY FOR TRANSPORTING THE DRIVER.
The modification of the motorcycle or the removal of the
original parts in arbitrary shapes can cause the -ACCESSORIES
the vehicle is illegal or unsafe. The user must comply with Our company has specifically selected acce-
all current National and Local regulations regarding genuine parts for the motorcycle. You are responsible
the vehicle as it is totally prohibited its from the selection, installation, and use of accessories that are not
CIRCULATION ON PUBLIC ROADS. of our company.
We advise always following detailed guidelines.
KELLER is not responsible for the replacement of in load and the dice below
unauthorized parts. • Carefully inspect the accessory to ensure
rarely does it not dim any light, reduces the distance to
floor, the angle of rotation or limits the stroke of the suspension-
session, the displacement of the direction or the operation
of the controls.
Do not install fairings that reduce airflow.
engine cooling. The fairings or windshields greatly
of those installed on the fork, of poor design or in-
properly positioned, they can produce forces
aerodynamics that cause instability while driving.
Do not add electrical equipment that exceeds the layer-
city of the vehicle's electrical system.
Do not carry a 'sidecar' or a trailer, this motorcycle does not
it is designed for this, and the driving will be serious-
affected mind if placed.
Accessories can increase the time required.
so that the hands or feet operate the controls
resulting in an increase in time of
reaction in an emergency.

Make sure that the accessories do not hinder the

freedom of movement of the driver and their habit-
likelihood of controlling.
An improper installation of accessories can
create instability and harm the functioning
maintenance of the motorcycle.
VEHICLE DESCRIPTION
COMPONENTS
Driver footrest
2. Rear brake lever
3. Front brake lever
4. Throttle grip
5. Chassis number
6. Engine number
Oil dipstick
8. Muffler
2. WINE REGISTRATION The engine number is stamped on the left side.
from the bottom part of the motorcycle.
The identification serial numbers of your vehicle
ass, they are necessary to manage the warranty.

Write down the numbers so that they can serve as a reference.

when you require them.

The chassis number is stamped on the front of the chassis, behind.

Where are the suspension bars located?

Nº DE CHASIS: ________________________ ENGINE NUMBER:________________________

3. FUEL LOAD
The motorcycle uses super unleaded gasoline.
The tank has a capacity of 8 liters of com- lead (minimum 95 octanes).
combustible.

Tank filling:
Place the motorcycle in a position perpendicular to the ground.
2. Turn the plastic lid counterclockwise.
Remove the lid.
4. Once the desired fuel has been poured, place new-
Put the lid on and turn clockwise to screw it on. Adjust.
firmly.
5. Make sure that the hose coming out of the cover of the com-
the combustible should not be strangled.
USER GUIDE Do not start the engine in closed or poorly ventilated areas.
ventilated, because it can cause accidents due to
toxic gases from the exhaust.
Pre-driving inspection
If the engine is started using the button of
It is necessary for your safety to control:
start, the motorcycle must be braked with the hand-
Engine oil level
front brake lever.
Combustible, according to the route to be taken
• Tires, inflate them according to the indicated pressures
If the engine cannot be started in 5 seconds,
Battery
turn on the engine again using the button
Throttle operation
to start with intervals of 10 seconds so that
Operation of lights and indicators
the battery can renew its power (recover) and not
Alignment of the direction
The starter motor overheats.
Proper functioning of the brakes
Avoid abruptly accelerating the engine when it's cold, as
2. Engine start
can cause serious damage.
Follow these steps:
Do not unnecessarily keep the motorcycle in
Put the unit in contact
Idle to avoid overloading the engine.
2. Check that it is in neutral point
3. Check the fuel level
3. Engine seat
4. Make sure to press the clutch to reduce friction when
starter motor and for greater safety.
We recommend that during the first 1000km:
5. Press the electric start button accelerating to Do not accelerate excessively, we suggest to drive
1/4" from the position of the handle.
at a maximum speed of 50 km/h.
• Be careful not to exceed 5000rpm, to
a proper adaptation of metals
 Do not overload the vehicle Use the front and rear brakes properly.
Perform the first MAINTENANCE at 4 hours or 30 dependent, reduces braking efficiency,
liters of fuel consumed, and then follow the The wheel can be locked, leading to a loss of control.
Instructions for the periodic maintenance table
I say. Slow down or brake "before" reaching a curve,
to prevent the wheel from slipping and reduce control of the
4. Driving motorcycle.
Do not brake, accelerate or turn abruptly if driving in rain.
Recommendations to follow: through wet or loose surface terrain, as it re-
Warm up the engine well before driving. reduces the maneuverability to stop or control the
Gradually increase the speed of the motor, by vehicle.
middle of the accelerator's grip, to avoid skidding in-
necessary. 6. Engine shutdown
Coordinate the accelerator and the brakes for deceleration
optimal. Method to stop:
Both brakes (front and rear) must be used simultaneously.
back) and they should not be applied with excessive force, in a way 1. With the vehicle stopped, completely decelerate (if it is
so that the braking efficiency is not reduced. that it was accelerating) to reduce the revolutions of the
engine until it idles.
5. Braking 2. Move the contact key to the off position

For normal braking: gradually apply both brakes

(front and rear) while decreasing speed. Park on a firm and level surface.

For maximum deceleration: decelerate completely

and I applied both brakes firmly preventing the wheels
they are blocked.
REVIEW, ADJUSTMENT AND MAINTENANCE
Engine oil Engine oil change:
The engine oil plays an important role in the operation of the
Oil change review: motor.
It is advised to do it before riding the motorcycle.
Keep the motorcycle on firm and level ground, on the so- Check the engine oil periodically and change it.
main door oil bias as indicated in the periodic table
Remove the dipstick and after cleaning it, insert it back in. maintenance tip.
new without screwing it to check the level.
The engine oil level should be between the high mark. Steps to follow:
and low.
1. Make sure the engine is off. Remove the plug.
of drainage located underneath (at the base) of the engine, when the
The engine is hot. This way it will drain the oil. Operate
several times the starter pedal to drain it completely.
2. Clean the oil filter and assemble it after cleaning.
3. Add 1400cm3 of clean oil. Start the engine and
run it at idle speed for 2 or 3 minutes
4. After the engine has stopped for 1 or 2 minutes, check the
oil level to see if the engine oil is between the
high and low brand.

Select SAE 20W – 50 motor oil. Do not use motor oil with a different grade, to prevent
that the engine breaks down.
If this type of oil is not available, read the es- Use SAE 20W-50 oil.
technical specifications and look for a substitute that works for you Never use reclaimed oil.
for the local ambient temperature.
Cleaning of the oil pan 3. Spark plug inspection or replacement

Using the recommended oil, the lim- will not be necessary. Remove the cover from the front panel.
part of the crankcase or internal components of the engine since the 2. Disconnect the spark plug cap and remove it with a wrench.
multigrade oils contain detergent agents that maintain of spark plugs.
clean and free of sediments all the lubricating components 3. Clean the dirt from the spark plug (remove carbon deposits)
cados. clean) with a spark plug cleaner or, if necessary, use
a wire brush. If the spark plug is corroded or there is excess
2. Tires If a carbon deposit is present in it, it needs to be replaced.
4. Check the gap between the spark plug electrodes, uti-
The proper air pressure provides better stability and measuring a wire-type thickness gauge.
comfort in driving, and of course improves life The gap or spark plug gap must be 0.8-0.9mm.
tire usefulness.
If it was necessary to adjust the spark plug gap:
Frequently check the tire pressure and co-
Ring it if necessary.
Monitor the pressure when the tires are cold. Check
that do not have cuts or any pointed embedded element
tado.
For your safety, replace worn tires
excessively.

Tire inflation pressure: 3.7 PSI. Carefully bend the side electrode
2. Make sure that the spark plug washer is in good condition.
sayings.
3. With the washer installed, hand-tighten the spark plug.
to avoid damaging the thread.
4. Tighten the spark plug, if it is new: 1/2 turn with a wrench Unarmed
of spark plugs to compress the washer. If it is the spark plug that is already used- Remove the air filter cover
I licked, just tighten between 1/8 and 1/4 of a turn, afterwards. 2. Remove the securing screw and disassemble the air filter
having settled.
5. Reattach the spark plug cap. Cleaning:
1. Being a paper filter element, it can be cleaned with
The spark plug must always be firmly tightened to avoid compressed air, blowing from the inside out.
overheating a lot and possibly damaging the engine. 2. Se recomienda de todas formas reemplazarlo tal como lo
indicate the maintenance schedule since it is not expensive and of
• Never use an improper heat range spark plug. It depends on factors such as fuel consumption,
joke, because it could cause damage to the engine. pollution and engine life.

It is recommended to use CR9EH-9 spark plugs. NOTES

The air filter element must be intact, otherwise
4. Review and replacement of the fuel filter trario, the engine will absorb the dust and pollutants and the
the engine's lifespan will be shortened.
1. Remove the fuel filter hose and drain the gasoline Prevent water from entering the air filter during washing
what is left in the circuit the motorcycle.
2. Disassemble the fuel filter Never clean the air filter element with water,
3. Install the new filter and reconnect the hose saline or any liquid.

5. Review and cleaning of the air filter 6. Throttle cable adjustment

1. Measure the throttle cable game, the stipulated value
The air filter must be disassembled and taken apart to see it should be 2-6mm.
if it is contaminated. If the accelerator cable game is not within the pa-
rámetros estipulados, ajuste la distancia por medio del ajus-
tador (regulator) that is found after the curve that
make the throttle cable under the right grip complex procedure.
If you need to reduce free play, unscrew the regulator and Therefore, we advise that in the event of any inconvenience
in case you want to increase by screwing. Check the play of the nothing or periodic review, go to a center au-
accelerator cable after starting the authorized, so that staff with
motor to make sure it works correctly or not knowledge and appropriate tools, carry out
I became accelerated. the tasks that are deemed appropriate.
If the game is not appropriate, adjust to the co- position.
correct. Valve Light:
Admission: 0.15 +/- 0.03 mm
7. Carburetor adjustment Escape: 0.20 +/- 0.03 mm

The adjustment and regulations of the carburetor must be done. 9. Brake inspection
cleared by authorized and trained personnel already
that a bad tuning can cause • Make the front and rear brake work to
engine damage. verify the correct functioning.

8. Valve clearance inspection and adjustment Check that the brake pads are not worn to the limit as
It can be risky to drive in this condition.
The valve can be damaged and the power of the engine.
diminished. Check the periodic valve light. Brake adjustment
mind. This unit has disc brakes, so they are self-adjusting.
bles.
Excessive play in the valves can cause noise, but the
lack of play prevents the valve from closing. Please remember to periodically check the level
Check or adjust the valve clearance when the engine is cold. of the brake fluid.
The sequence to follow to correctly perform the review
and, if necessary, the adjustment of the valve clearance, is a pro- In any case, the desired distance can be adjusted in
 both brakes: the electrolyte level should not be above the maximum level, of
on the contrary, the electrolyte will drip and the motorcycle may be
corroded.
The battery electrolytes contain sulfuric acid:

If you accidentally touch the acid of the bat-

rinse with fresh water for 5 minutes and visit
to the doctor immediately.
Avoid foreign agents from entering the battery during the process.
10. Battery review of assembly and disassembly of it.
Clean the surface of the battery from dust and corrosives. Make sure the ventilation pipe is not blocked.
2. Keep the motorcycle upright and check the
battery electrolyte level In case of being replaced, the battery is 12-6.5Ah
The electrolyte level should be maintained at a point between
the upper level line and the lower level line.
11. Fuse Replacement
If the electrolyte level is low, add water.
distilled to increase it. Do not use regular water. 1. Turn the power switch to the OFF position.
If the copper wire is seriously damaged, re- 2. Remove the battery cover.
replace it with a new one. 3. Remove the fuse holder, which is located at the back.
battery status.
4. Replace the fuse. Use the fuse as a replacement.
While disconnecting the battery cable, disconnect the ter- with the indicated specification.
negative (-) first, then disconnect (+). 5. If the new fuse blows immediately, seek a
When I performed the operation of connecting the battery cable, authorized center in order to verify the electrical circuit and
connect the positive first (+), and then connect the negative (-). to verify that there is no short circuit.

While performing the operation of filling distilled water, the Do not use a fuse that is not of the same amperage.
12. Motorcycle cleaning rain and thus avoid possible unnecessary damage.
•Check the main parts of the motorcycle before the al-
Wash the motorcycle periodically to prevent storage.
that the surface loses color. To keep the motorcycle in normal conditions then
from the storage:
High-pressure water can damage parts.
from the motorcycle, therefore do not rinse the si- 1. Replace the engine oil
next parts under pressure: wheel hub, is- 2. Drain the remaining gasoline from the fuel tank and c-ar-
cap, fuel tank and the portion of sander. Then spray the inner face with anti-rust oil
seat, carburetor, ignition switch, etc. fuel tank and close the tank with the cap.
3. If the storage exceeds one month, the gasoline of the carburetor-
1. After the motorcycle has been cleaned, in- Dew must be drained.
water it with plenty of fresh water. Recommend- As gasoline is flammable, the engine must be turned off.
You should not use car wash shampoo, since during the filling and emptying of the fuel.
any other detergent is harmful to the It is not allowed to light cigarettes, fire, or sparks.
paint for containing degreasing agents where the fuel is emptied or where the fuel is al-
ammoniacal or caustic. stored or where the motorcycle is filled with gasoline.
2. Follow the motorcycle. Remove the spark plug
3. Run the stationary engine for a few 5. Fill with a spoon (15-20ml) of clean oil inside
minutes. of the cylinder and insert a piece of cloth into the hole of
4. Check the brakes several times before driving. the spark plug. Screw in the spark plug, adjust it, and rotate the engine several times

the motorcycle, and made repairs or adjustments if sometimes activating the starter motor, without starting it.
it is necessary. Adjust the spark plug.
6. Remove the motorcycle battery. Place the battery in a
13. Procedure during storage safe place, where it won't freeze or be exposed to the rays
of the sun. Charge the battery once a month with the regime (am-
Pay attention to protect your motorcycle from humidity, sun and specified. (NO GREATER THAN 6 Ah)
7. Clean and dry the motorcycle. Spray the painted surfaces. The hydraulic damper has the function of counteracting the
the color fixative and the chrome surfaces with oil rebound, that is, it is a counterforce to it and according to
anti-oxide. The need and land can be regulated.
8. Adjust the tire pressure.
9. After the motorcycle has been parked, lift the
wheels with a piece of wood, so that the wheels do not
touch the floor.
10. Cover the motorcycle with a motorcycle cover.
Front suspension
14. Commissioning after storage
It can be adjusted in Bounce and Compression
Remove the cover and clean the motorcycle completely.
2. If the motorcycle has been stored for more than 4 months, Rebound:
the engine oil must be replaced.
3. Charge the battery before it is installed.
4. Drain the anti-oxidant oil from the fuel tank Procedure:
before refueling. Turn the indicated screw by the
5. Test the motorcycle's performance at low speed, Arrow with a screwdriver
in a safe area before you drive again clockwise plan for
badly to verify the proper functioning of the vehicle reduce the bounce and in meaning
ass counterclockwise to achieve the
opposite effect.
15. Suspensions

This unit is equipped with front and rear suspensions.

adjustable beams with different possibilities to achieve the balance
optimal conduction book.
Compression: Rear Suspension

By regulating the compression, I will achieve- Procedure:

more or less hardness according to Turn the indicated screw
the required. as a regulator with a dis-
flat screwdriver in direction
Procedure: schedule to reduce the re-
boat and counterclockwise
Remove the protective cover (1) river to achieve the effect
opposite.
With a flat screwdriver, turn
the screw (2) clockwise Compression:
to harden and in an anti- direction
schedule to achieve the counter effect By regulating the compression, we will achieve greater or lesser hardness.
river. according to what is required in addition to affecting the height.

Procedure:

Loosen the spiral locknut counterclockwise.

- To achieve greater height and rigidity, screw in a clockwise direction.

turn the spiral screw and unscrew it to achieve the effect
opposite.

Tighten the locknut once adjusted.

16. Periodic maintenance table.
Perform the first check after 4 hours or 30 liters of fuel consumed. Repeat.
SERVICE SHEET
every 10 hours or 75 liters of fuel consumed
No. Description Operation Specifications
1 Fuel pipe Verify It must be free of obstructions.
2 Fuel filter Verify It must be free of obstructions
3 Throttle operation Verify Must return freely
4 Air filter Clean
5 Crankcase breather Verify It must be free of obstructions
6 Spark plug Verify
7 Engine oil Replace Every 8 tanks - SAE20W50 1.4 L
8 Oil filter -
9 Engine idle Verify
10 Transmission Chain Tension/Lubricate 2/3 Free play CMS
11 Battery Check
19 Suspension Verify
20 Wheels and tires Verify 30 to 35 Lbs of pressure
21 Steering head bearings Verify Lubricate if necessary
22 Valve light Verify Ad: 0.15 - Esc: 0.20 mm
23 Cable control/command Verify
25 Brake Pads -
26 Brake fluid Verify Type DOT4
28 Losses Verify
30 engine fastening bolts Torque 2.5 to 3 KG.M
31 Clutch Regular
After the first 6 tanks
32 Adjusted Cylinder Head To torque of use - 3 KG.M
WARRANTY
2. NECESSARY REQUIREMENTS FOR THE CLAIM
1. GENERAL CONDITIONS
OF THE GUARANTEE
KELLER MOTORS offers throughout its range of motorcycles and
The warranty is the responsibility of both the brand and the
scooters 1 year or 10,000 KM (whichever comes first) from GA-
user, so you as a customer must:
MECHANICAL WARRANTY starting from the invoice date of your vehicle.
vehicle.
• Use your vehicle responsibly and carefully, as appropriate.
In this particular case, since it is a commercial vehicle
with all the recommendations from the manual and the laws of
request, KELLER MOTORS limits the warranty only to
current transit.
effects of engine materials (Mechanical Warranty) by the
• Immediate notification of the malfunction or functional problem
6 MONTH TERM:
the claim originates from an Official Agent or comes from
authorized deduction.
Mechanical Warranty refers to the components that
Approach the dealership or agent with the vehicle to
are part of the engine that are not excluded in the present
to establish that none of the conditions are met
document. nullification of the guarantee, after a brief verification according to
All maintenance services must be carried out according to
it will be recommended whether or not to detain the vehicle.
the table on page 26. • Present the purchase invoice along with the manual for verification.
The warranty covers only parts, excluding labor. Specification of the validity period of the Guarantee.
work and transportation of the material or motorcycle as corresponds
pond.
The parts included in the Warranty will be repaired or replaced.
arranged as necessary for KELLER MOTORS.
3. EXCLUSIONS OF THE WARRANTY
Are TOTALLY EXCLUDED from the Warranty:
Regulations or adjustments related to the maintenance Any deterioration caused by wear or fading.
normal maintenance of the vehicle. cultural aspects of paintings, upholstery, chrome, etc.
Friction elements such as brake pads and shoes, discs of
clutch, centrifugal clutch shoes. 4. CONDITIONS FOR THE NULLITY OF THE GUARANTEE
Chain, pinion, crown, distribution tensioner.
All types of fluids such as brake fluids, engine oil The Guarantee will automatically expire when fulfilled
or transmission, coolant. any of the following factors:
Fuel, oil, or air filters.
Seats/upholstery. The non-compliance with any of the items indicated in
Tires and tubes. the PERIODIC MAINTENANCE TABLE.
Bushings of any type. Modify the original condition of the vehicle.
Lightning. The use of non-original Keller spare parts or components.
Rims. The addition of accessories.
Dough. Perform services or repairs in UNAUTHORIZED centers
Command cables: brake/clutch/throttle. by Keller Motors.
Spark plugs. • Damages caused by misuse or intention, for cases for-
Transmission systems: chain, sprocket and pinion - belt and variator tweets, accidents, competitions or any damage not attributed
of transmission. due to manufacturing or assembly defect.
Voltage regulators. Rental of the vehicle to third parties.
Batteries. The use of lubricant that is not specified in the manual
Fuses. of the vehicle user.
Starter motor brushes.
CDI/Ignition.
Rearview mirrors.
Minor flaws not considered defects because they do not affect
in the normal operation of the vehicle.
5. LIMITATIONS OF THE WARRANTY

The WARRANTY is limited to the exchange or repair of parts. • All legal management before any authority and the expenses incurred
known as defective by the builder, not asu- these incursions are not covered by this warranty.
without any obligation to compensate for possible In no case of those contemplated above, the com-
expenses or consequences resulting from the transfer or the immobi- the buyer may seek annulment or non-compliance of the
vehicle utilization. purchase contract, nor any compensation for damage.

KELLER MOTORS limits the scope of the Warranty in the si-

next cases:

When the damages are caused by delay in making the

application for warranty and/or delays in the completion of the work
for guarantees, has no right to compensation nor to the pro-
extension of the guarantee.
It is the owner's responsibility to transport the unit, as
as well as the cost of the labor required for the re-
replacement of the defective part that is covered by the warranty, without having
this right to claims or compensation for impossibility
of vehicle use nor for the inconveniences or costs of
any nature that it could cause him.
The dealer or selling agent and KELLER MOTORS which-
and exempted from all responsibility and obligation for
any accident that may occur to people and/or things,
for and during the use of the vehicle or due to direct or indirect causes
directly resulting from it, even if the accident is
attributable to a manufacturing defect or the material.
6. SERVICE COUPONS