M a n u the property owner

WELCOME TO THE DOMINATE

¡ CLAN!
Now you are the proud owner of the modern masterpiece, If you need additional information, please
Dominar 400. The new Dominar 400 is designed to offer a Visit one of the Bajaj distributors. If necessary, also
unprecedented technology with superior performance. This makes you can write to us with the relevant details such as the number
the Dominar, unbeatable and unmatched on every street. de serie de su moto, número de motor, Fecha de compra, Km
Before leaving, please read this owner's manual carefully. routes, name of the selling distributor and their phone numbers
and familiarize yourself with the mechanisms of operation, the contact .
controls and maintenance requirements of your Dominar
400. This will ensure you a safe and secure user experience. By last, we ask you to provide him/her a his motorcycle
problems. proper care y regular maintenance, as it
described in this manual. We are confident that it will offer you
To keep your motorcycle in perfect working condition and a long experience of use without problems.
with consistent performance, we have specially scheduled the Visitwww.globalbajaj.comto know more about your Dominate.
periodic maintenance services in any of our Accelerate, change gears, and enjoy the experience
Bajaj distributors or Bajaj authorized service centers, that are Dominate ...
well equipped with all the necessary facilities, spare parts,
oil and skilled labor to ensure you the best care ¡ Get ready to dominate the night!
for your Master.
INDEX
SR. DESCRIPTION Page No. 16. Good driving habits 21
Specifications Techniques 1 17. Safe driving tips ó / precautions in rain 22
3. Identification Data ón 3 18. Engine oil 23
3. Localizationó of the parts 4 á and pressure inflation
19. Pneumatics 24
4. Ignition/steering lock switch 5 20. Battery ía 25
5. Fuel tank cap & secondary speedometer 6 21. Engine cooling system 26
7. Speed details íprimary metro 7 22. Periodic maintenance information 28
8. Dual channel ABS system Brake fluid / headlight maintenance 30
9. Primary metroó configuration
í on 31
10. Right control switches 12 25. Storage Care 35
10. Automatic farro & operation of the lights 13
11.Left control switches 14
12. Seat disassembly / tool kit 15
13. Seat assembly 16
14. Daily safety inspections 17
15. How to ride your motorcycle 18

SAFETY INFORMATION AND WARNINGS:

Warning: This indicates a potential danger or injury to you or The description and illustration in this brochure should not be considered binding.
other people and the vehicle that could happen if the for manufacturers. The essential characteristics of the type described and illustrated here
maintenance services. remain unchanged. Bajaj Auto Limited reserves the right to make
Caution: This indicates a potential danger that could at any time without being required to update this brochure or do
damage to the vehicle. Follow the advice provided with the modifications to the vehicle, parts or accessories that are convenient and
caution. necessary.
TECHNICAL SPECIFICATIONS
TECHNICAL
Motor SPECIFICATIONS
: 4 strokes, 1 Cylinder. Tank capacity
Diá x Carrera : 89.0 mm x 60.0 mm Full 13 liters
Displacement : 373.27 cc Reservation : N/A
Compression Ratio: 11.3 1 Type of fuel : Premium 93 Octane
Idle RPM 1600 + 100 RPM Dimensions :
MaxPower 34.5 hp (35 PS) : 2156 mm
@ 8000RPM :
Torque Max 35 Nm @ 6500 RPM High : 1112 mm
Ignition System 12V, DC Distance between axes : 1453 mm
F.I. System Electronic injection Clear to the floor : 157 mm
BOSCH Tire size
Spark plugs 3 pcs. Frontal 110/70-R17, tubeless
Electrode clearance : 0.8 ~ 0.9 mm Backside 150/60-R17, tubeless
Lubrication Wet sump, forced Inflation pressure
Transmission 6 speeds Frontal 2.04 Kgf/cm2(29 PSI)
Gear shift pattern: 1 down 5 up Back (Solo) : 2.25 Kgf/cm2(32 PSI)
Engine cooling For liquid Rear (passenger side) : 2.25 Kgf/cm2(32 PSI)
On Electric
Front and rear brakes ABS

1
Electrical System : 12 Volts DC Side stand indicator: LED - Red
Front light : LED ABS Indicator LED - Yellow
Light position : LED Rear license plate light: LED
Rear / brake light : LED Honk 12V DC
Directional : LED (4 orange) Battery : 12V 8Ah VRLA
Neutral Indicator : LED, Green : 182 kg. (ABS)
High beam indicator : LED, Blue Total weight: 332Kg. (ABS)
Directional indicator: LED, Green
Speedometer light LCD, Blue
Fuel level indicator: LCD bar
Indicador presión aceite : LED - Rojo • All dimensions are under conditions without
load.
Malfunction indicator : Yellow LED
• The above information is subject to change without
Refrigerant temp indicator: LED - Red
prior notice.
Low battery indicator : LED - Red
Bajaj Logo : LED - Blue
RPM Limit LED - Amber THE MOTORCYCLE MUST CONTAIN AT LEAST
Service reminder : LCD ! 3 liters of fuel in the tank for
AVOID DAMAGE TO THE FUEL PUMP.

2
 IDENTIFICATION DATA N
The chassis and engine serial numbers are used to register the motorcycle.
They are the only alphanumeric codes to identify your private vehicle from others of the same kind.
model and type.

LOCATION LOCATION
FRAME MOTOR
On the seat mounting bracket On the left crankcase near the pedal of
(Alphanumeric - 17 Digits) changes(Alpha - Numeric-11 Digits)

3
LOCATION OF THE PARTS
TION OFPARTS
Speedometer Fast meter
Seat Secondary primary
Supports passenger
Pilot seat

Plate holder
to trace

Window Faro
Inspection frontal
Brake pedal Oil LED
backside
rear brake disc
Front brake disc
Refrigerant Inspection Window
Suspension fork on

4
 SWITCH
IGNITION

IGNITION SWITCH TO BLOCK THE ADDRESS

To block the direction, turn the handlebars to the side.
It has 3 positions. left. Press and turn the key to the "LOCK" position and
Take away the key.
Theblockofaddressesonlyontheleftside.
LOCK: Address blocked Ignition OFF

/
OFF: Unlocked direction Ignition OFF TO RELEASE THE ADDRESS
Insert the key into the switch of
ignition. Press & turn clockwise
ON : Unlocked address Ignition ON schedule to the positions 'OFF' or 'ON'.
/
KEY
The same key is used for the ignition,
address blocking, tank
fuel and seat opening

5
 1 2 3 4 5

6 7

TANK CAP &

SECONDARY SPEEDOMETER
The speedometer screen will work when the switch of
make sure it is in the 'ON' position.
TANK CAP 1. Malfunction indicator: It lights up when observed
To open the gas station cap, some anomaly was in the functioning of the components of the
FI system .
Raise the lid. Insert the key into the lock.
2. Battery indicator Low battery: indicates that the battery needs to be charged.
Turn it clockwise and lift the plug.
3.Bajaj Logo: Remains lit.
fuel tank
4. High Light Indicator: It lights up when the headlight is on and the
•Paracerrarel cap of the deposit, introduce it high beam is selected.
turn the key in the lock clockwise and 5. ABS Indicator (Yellow): With the ignition switch on
pressure cap against the tank of positionWhenON,theABSindicatorlightsup.Whenthespeed
of the vehicle íass
is m á at 10 Km/h, the ABS indicator turns off,
combustible. The sound 'Click' ensures that the
if this indicator lights up while the vehicle íthe ass is á
the cap is well closed. functioning means there is a problem with the ABS unit.
6. Refrigerant temperature indicator: It lights up when the
PRECAUTION
ÓN temperature exceeds 110 °C.

Do not use a metal keychain as it could 7. Side stand indicator: When the side stand is

damage the tank's paint. 6 down, and the power switch is in 'ON', the indicator
the side support will shine.
 THE SPEEDOMETER SCREEN ONLY LIGHTS UP
WITH THE IGNITION SWITCH IN 'ON' POSITION
1. Tachometer: Shows the speed of the
motor in RPM.
2.Service Reminder: The symbol 'Key'
1 it lights up when the ODO meter reading
2
indica los siguientes recorridos : 1° : 450 km,
3 9
2 º : 4450km, 3 º : 9450 km, 4 º : 14450 km y
4 subsequently every 5000 km. The icon
10 it will continue to shine until it is restored.
11 This icon must be restarted after
the service is performed.
5 12
3. Odometer: The odometer shows the
13 total distance that the vehicle has traveled.
6
7 The odometer cannot be reset to
8 14 zero

7
4.Trip meter: Trip 1 and Trip 2 show the 10. Fuel level indicator: Shows the
distance traveled since it was restored by approximate fuel level in the tank
úlast time to zero. Goes to zero after 999.9 fuel.
km y contin a actualizando.
ú 11. Low fuel level indicator:
5.Bot n ó MODE: It is used to switch between the blinks in case the level of
opciones Trip 1, Trip 2, ODO, Reloj y recordatorio combustible sea low (1 bar or less)
of service. 12. Speedometer: The speed of the vehicle is
6. Neutral Indicator: When the transmission will be displayed digitally in Km / Hr.
In Neutral, the Neutral indicator will shine. 13.Set Button (Adjust Button): The Set Button is used
7. Indicates low oil pressure It lights up to set the clock reminder and
when the engine oil pressure is low. service.
8. Directional indicator (LH and RH): It lights up 14. Engine RPM limit: Blinking
when the switch of the ... continuously when the engine RPM is at
directional to the left or right. >9000 RPM .
9. Digital Clock: Indicates the time in HH: MM (AM / PM)

After turning on the power switch, the following indicators will remain lit.
until the engine starts. Coolant Temperature Indicator | Low Battery Indicator | Low Pressure
oil | Malfunction indicator

8
SYSTEMABS It is also recommended to use front brakes.
DOUBLE CHANNEL and rear simultaneously .
Always slow down in curves. The system of
Always maintain a safe distance between you and the
ABS brakes cannot prevent accidents resulting from
objects in front. The speeds of the vehicle always
excessive speeds.
should be reduced during extreme conditions of the
If the ABS warning light is on and stays on,
road. The stopping distance for motorcycles
It is possible that I have a problem with the ABS system. In
equipped with an ABS braking system can be more
in this case, your brakes will function normally without it.
longer than for those who do not have it.
ABS system.

When the front brake / rear brake is applied in In case of the malfunction indicator,
conditions that can block the wheels, one feels a ABS indicator, the temperature indicator of the
corresponding sensation (pulse) in the lever of soda, the low battery charge indicator and
front brake / rear brake pedal. This is normal and the engine low oil pressureó indicator lights up
speedometer,
í take your motorcycle to the Bajaj distributors or
it means that your ABS is active .
authorized Bajaj service centers for a review. ó

9
 TRIP 1 / Reminder
TRIP 2 Service Mode Set

SPEED PRIMARY METRO

TRAVEL METER SERVICE REMINDER ( )
• The Mode & Set buttons select & The "key" symbol lights up when the reading
reset between 'ODO / TRIP 1 / TRIP 2'. the odometer reaches the following Km
Press the bot nóMODE 1 ° : 450 Km 2 ° : 4450 Km
Switch between the options
1. for less than 2
ODO / TRIP 1 / TRIP 2 3 ° : 9450 Km 4 ° : 14450 Km
seconds
and subsequently every 5000 Km.
Resetting of
Press the button ón
TRIP 1 / TRIP 2 .
2. SET during m as Bring the motorcycle to a dealership
of 5 seconds. BAJAJ authorized to reconfigure
the service reminder icon.

10
 Watch Mode Set

TIME ADJUSTMENT in the way

1. Select TRIP 1
• The digital clock shows the for less than 2 seconds.
time in HR and MM Press the modeó button. 'Stop blinking
separated by two 2. adjust together during m more than 2The digits are blinking
points ':' seg.
• 12-hour clock. Press the buttonmode
3. The hour is increased.
• Initially ':' blinks for less than 1 sec.
• The clock adjustment only is Press the adjustment
ó button
4. The minutes are increasing
possible in TRIP mode 1. for less than 1 sec.
Se guarda la hora. Salga del modo de
Press the bot ó in the way and
5. clock adjustment. The digits stop
adjust for more than 2 seconds.
á blink and ':' begin to blink
Automatic exit without saving the value
The clock adjustment mode established. If engine rpm is given /
6th á selected and I do not vehicle, the system will exit the mode of
make no edits on clock adjustment without saving the value
for more than á5 seconds. established

11
 B A C

B.Power button
CONTROL The start button operates the electric starter. It
it is recommended to start the engine with the transmission in

RIGHT deadlock.
Transmission with gear - Press the clutch lever

SWITCH RH and use the starter button to start the

motor.

A. Light switch C.Engine stop switch

It has 2 positions. The engine stop switch is used
to turn the engine on and off.
Pilot Mode
Motor Off
Light mode
Motor On

12
FARO AUTOM ÁTICO &
OPERATION ÓIN LIGHTS
AUTOMATIC
• Your vehicle has a safety featureHEADLAMP &once the engine is
that automatically turns on the headlight
It gets going. This provides better visibility to other road users.
• While driving, you can turn on the high beam or beam mode by pressing the selector switch.
of high / low beam, keeping the light switch in headlight mode.

Light selector They light up Trigger effect

Ignition switch on Motor Light switch high / low of the rebase

Any Way Front position lamp

AnyPosition Turn on high beam
Rear lamp
ON ) OFF O
Rear panel lamp
low light .
O Lamp control switch
Lighting Both lighting of
speedometer
Front position light
Any Mode
Rear lamp
On Rear light bracket
(Pilot Mode) O Control switch
Turn on the light
Lighting Lighting of the low.
speedometer and high beam
Position lamp
front rear light
Low light Rear panel door, Switch Turn on the light
mode( ) lamp control
(Mode
lighthouse Lighting Lighting of high .
speedometer and low light
Lá stop of position front axle
Rear plate holder, Switch of
light control, lighting of the ó
High light speed metro
í Without effect
mode ) High light

13
 D E F

Left Control
SWITCHES

D.High beam / low beam selector F.Horn button

When the lighthouse is on, a beam can be selected
high or low with this switch. The indicator light of ( Press to make it sound
high intensity located on the speedometer lights up horn.
when the high beam light is selected.
High Light Low light
G.Gap trigger
E.Directional switch Press the trigger to turn on the high beam. It is
used to signal to the vehicles that
When the turn signal knob is activated to
they come from the opposite side while you
Left or Right the respective indicator
exceeds .
start to blink. To stop the blinking,
press the knob and release

14
 B

First aid kit Kithertools

Seat disassembly
& Tool kit
Passenger seat disassembly TOOLS KIT LOCATION
• Insert the key into the lock (A) • The tool kit is á under the seat of the seat
• Turn the key clockwise. of the seat.
• Lift the back part of the 'Back seat' • The tool game is held by a strap.
• Pull the seat back. made of rubber .
• Remove the rear seat.
FIRST AID KIT LOCATION
Driver's seat disassembly
• First, remove the back seat. • It is located on the LEFT side of the colin below the
• Remove the mounting screws (B). rear seat.
• Pull back from the rear end of the
Driver's seat.
• Remove the driver's seat.
15
 F
A
C H
E F
G

B D I
G

Assembly of the
asientos
Driver's seat Passenger seat
• Match the support of 'Driver's seat' • First, make sure that the 'seat of
With the slot (B), make sure that the the conductor is mounted correctly .
rubber shock absorber is installed.
• Make sure the 'Tool Kit'
• Empuje el asiento del conductor hacia el tanque be located correctly.
from gasoline. • Put the back seat in.
• Align the rear supports of the seat of the • Match the hook (G) of the rear seat support (F).
conductor (C) with the holes (D)
• Insert the locking rod (H) of the seat into the latch of the
provided in the chassis.
seat (I).
• Tighten the screws (E).
• Press the back part of the seat from the back.
superior.

16
Daily safety inspections
Before riding the motorcycle, make sure to • Throttle cable game of 2 ~ 3 mm.
review the following articles. Please give the Smooth operation and positive return to the position ón
appropriate importance to these checks closed.
and I completed all of them before driving the
motorcycle. • Brake fluid level above the MIN mark
provided in the department ó site, applicable to the vehicle íbrake butt
If irregularities are detected during these
controls, refer to the Maintenance chapter disco.
and consult your dealer for action The slack of the transmission chain is 20 ~ 30 mm
necessary to return the motorcycle to a and is properly lubricated.
safe operating condition.
• Funci of all the lights and horn
• Clutch lever play - 2 to 3 mm
Warning: If these checks are not performed

! every day before driving, you can

serious damage or serious accidents may occur.
• Check the level of the coolant liquid
í between the
MIN and MAX mark of the refrigerant tank in position
vehicle vertical on the leveled surface.
• Sufficient fuel level for the distance • Smooth movement of the direction ón.
on planned travel. There are no leaks of • The side stand returns to its position ó in withdrawalíyes.
fuel in the fuel lines.
• Correct
ó inflation pressure in both tires á Ticos
• Engine oil level (between the mark of
Appropriate tread depth of the
upper and lower level) in the vertical position of neumatic
á - without cracks or cuts.
vehicle on the leveled surface.
• Correct adjustment of the rearview mirrors .

17
 4
5
6
How to drive
3 your motorcycle
2
N
Leverage 1
Change
In case of download of the
marches
Patr ó in return battery, the vehicle can
marches pulling it out by pushing.

Engine start 2.Gear shift

• Turnthekeytotheposition. Close the accelerator and press the lever of the
clutch.
• Move the switch
• Confirm that the transmission ó is not á in neutral / press the • Change to the following gear m á higher or lower.
clutch lever if the transmission ó is not á in progress. • Open the accelerator and release the clutch lever.
• With the accelerator closed, press the button. ó at the start , slowly and simultaneously.
á
• Release the startó button when the engine starts. Moving
Caution: Do not operate the power button for more than 5 • Check that the side stand is up.
seconds, otherwise the battery would drain.
• Press the clutch lever.
• Shift to first gear.
Wait 15 seconds between each operation of the starter.
• Open the accelerator and release the clutch lever.
will facilitate battery recovery.
slowly and simultaneously.
The motorcycle is á equipped with a switch of • As the clutch starts to work, open
clutch. This switch ensures that the engine does not the accelerator a little more, giving the engine only what
Start if the transmission is inómotion.áHowever, the sufficient rpm to avoid stalling .
the engine can be started in any gear if it
press the clutch lever .
18
 Speeds for changes
Warning : When it moves towards
descendants down to the lower march, do not move to
such a high speed that the revolutions of
Of 6° a 5° March
From 5
°
a 4° March
68 km/h
62 km / h
! the motor excessively shaking. This can
cause damage to the engine and the rear wheel
can skate. The change must be made at the
From 4
°
a 3 March
rd
46 km / h recommended speeds as shown
Of 3° a 2° March 38 km/h in the previous table.

From 2
°
a1° March 27 km / h
5. Stopping the motorcycle
• Fully close the throttle.
Brake • Change the transmission toó neutral.
• Close the throttle completely, • Completely stop the motorcycle.
leaving the clutch engaged • Turn off the power switch.
(except in the case of change of
marches) so that the braking of the Motor settlement
engine helps to brake the motorcycle.
The proper filming is important for a
• Download one march at a time so that it can be
vida mejor y un funcionamiento sin problemas
find in Neutral when you
of the vehicle.
stop completely.
• During the first 2000 km of
• When stopping, always apply both brakes. shooting, do not exceed the following.
same time. speeds.

19
 Km 1° 2 ° 3° 4° 5° 6° The ignition
ó not to cut á if it is attempted that the vehicle item be
driven to position ó in the descent of the lateral support.
0 - 1000 13 24 37 50 56 73
3. If the engine coolant temperature exceeds 110
1000 - 2000 20 32 42 56 62 85 ° C, the coolant temperature indicator self
it will light up indicating that the engine is á overheated Yes
the motorcycle is used in such condition ó in the temperature of
• Always keep the speed below
the limits mentioned in the table. soft drink increase up to 115 á °C and the ECU will not allow
• Do not run the engine too fast. that the engine operates above 4500 rpm.
• Do not start moving the engine immediately Always maintain a minimum of 3.00
í liters in the tank.
after starting it. Run the engine fuel for the proper functioning of the pump
for a minute at idle so that the oil combustible.
have the opportunity to work on the engine . Use 93 octane gasoline

7. Parking the motorcycle 6.This vehicle has the new 'A & S' clutch (Assistance and
rebound). Due to this, very little force is required to
• This vehicle does not have central support.
the operation of the clutch lever. You do not
• Support the motorcycle on a firm surface to feelá shaking while shifting gears
and leveled with the lateral support. descendants. A slight pulse is felt. ó in the lever
• Block the address. of the clutch. This is normal and indicates that the clutch
á well.
'A & S' is doing
! CAUTION The power output of the lighthouse is 20W m maximum and by the
1. Do not park on a surface the flashlight shines continuously without reducing the life of
smooth or with a slope the drum ía.
pronounced since the motorcycle
it could fall.
Always make sure that the support
lateral esthetic raised while
start .
20
 Good management habits
• Use 93 octane gasoline or higher for a
optimal performance of the motorcycle.

• Always keep a minimum of 3 liters of

gasoline in the gasoline tank for good
• Turn off the engine if it has been stopped for more than two
operation of the fuel pump.
minutes.
• Always maintain the recommended air pressure • Fully pull the clutch lever
on both tires. while the transmission gear is displaced.
• Always keep the engine oil level and • Always ensure that the battery is
soda between the MIN and MAX brand in the fully loaded .
vertical position of the motorcycle on a surface
levelled.

• Optimal driving speed of 40 to 50 km/h Fuel efficiency

• Avoid abrupt braking. The best way to measure performance is to use the
full tank method.
• Always apply both brakes simultaneously. • Fill the tank to the brim.
• Changed gears judiciously according to the • Drive for 100 km.
speed and the required load. • Refill the tank at the same filling station.
of fuel, probably with the same
• Do not overload the vehicle above the fuel dispenser.
specified payload.
• Divide the distance traveled by the amount of
• Use the accelerator with caution. combustible filling.

21
Driving tips ó in safe. • Remember that tires slide more easily on
wet surfaces.
Care in rainy season • Drive carefully. Start early and arrive at your
destination with security.
• Always carry the registration and insurance documents of the
Safe driving tips vehicle, and a valid driver's license with you.
• Always wear a helmet while riding. Your helmet must • Avoid driving on loose sand or rocks where the vehicle is
adjust to the appropriate safety regulations. likely to slip.
• Read carefully the instructions given in this • Properly wrap loose clothing while driving or
manual and follow them closely. mount to avoid tangles in the wheel or other objects in the
• Avoid installing unnecessary accessories for your safety road.
and that of her companion. Always focus on safe driving.
• Get familiar with and follow the traffic rules of your country, as such
like traffic signs in general.
• Familiarize yourself with the startup, the acceleration and the Care during the rainy season
vehicle braking. • The client is advised to take appropriate care in
• When applying the brakes, use the front brakes and é little rain. Cover the motorcycle to avoid rust on
simultaneously. Applying only one brake can due to adverse atmospheric conditions.é
cause the driver to lose control. • Cleaning the vehicle with
í a soft cloth or damp
ñ ragú and
• Ride at the right speed and avoid clean to avoid scratches onñthe painted parts.
unnecessary accelerations and braking due to the
• Clean and lubricate all the important parts as you
safety and low fuel consumption, but
detail in a periodic maintenance table. ó
also for a longer lifespan of the vehicle.
• Do not apply a direct water spray on painted parts,
During the rain, drive with more caution electrical
é or electronic.
ó
• Do not obstruct the engine cooling at ñ adding
unnecessary accessories on the front .

22
 A
C
B

D
Filled stopper B: Oil level

Motor oil For optimal engine performance and

maintain warranty. It is an oil
Oil level check specially formulated for Dominar 400 .
• Check the engine oil level every day. Park the motorcycle.
Oil
perpendicular to the ground on a level surface. Model recommended Degree
• Check the oil level through the 'B' level window. Dominate SAE 10W50 API
10W50
• Always keep the engine oil level between the mark 400 'SL' or JASO 'MA2'
upper (C) and the lower mark (D) provided on the lid of the
• Change frequency: 1°service &
clutch. Refill with the specified oil grade if
The oil level is below the low level mark. Back every 2500 Km.
• Fill each: 2500 km.
Oil capacity :
! CAUTION:
• Change in each service: 1500 ml. It is very important to adhere to the recommended dosage.
Engine opening: 1800 ml. and oil change frequency for a long
lifetime of CR components engine critics. For
Grado de aceite : details. Please consult the maintenance table
periodic
ó .
Always ask for the next grade of oil

23
 Punctures
Neum attics without camera. • Visit workshop repair closest tire shop for

Inflation
ó pressure • Repair only
ú for the m filling or stopper method.
• Do not use the patch
é method to eliminate the puncture of the
pneumatic
á without an á air chamber .

Tubeless tires CAUTION

The walls of the tires in contact with the wheel must not
The main advantage of tubeless tires to get damaged in any way during the assembly / disassembly of the
the camera is that in the case of a flat tire tire. The sidewalls of the tire in contact with the wheel
the speed of the air leak is very slow and they sell the air.
the customer can easily drive the
vehicle to the repair point. Inflation pressure
Maintain the proper tire pressure as mentioned
In case the motorcycle is next to extend the life of the tire and for better
equipped with imported tires. It fuel consumption.
ensures compliance with the regulations
respective in India. Frontal 29 PSI
Dominar 400 Back (only) 32 PSI
Rear with passenger 32PSI
24
 Beat day
• When the 'Low Battery' icon appears on the
12V - 8 Ah VRLA speedometer, it is advisable to get in touch with the
• It is under the driver's seat. .

Characteristics
• It is not required to fill the cells How to keep the battery healthy?
• Reduction óof self-discharge, Improves safety. Ignition switch OFF when the engine is not running
march.
• Without a ventilation pipe open
ó to the atmosphere, therefore
ó
Check the battery during periodic services.
ó the
So, there is no electrolyte download through é
Do not press the start button for more than 5 seconds.
ventilation tube ón.
Wait 15-20 seconds for the battery to recover.
CAUTION Do not add additional electrical accessories. This will reduce the
battery life and could damage the ECU.
Do not drive with the battery disconnected. You may
Disconnect the battery cables + ve & -ve if the vehicle is going
cause damage to electrical components and
to be stored for more than 2 weeks. This prevents the self
electronics.
download .
• One must be careful with the environment when
dispose of the used battery.
• It is always recommended to deliver the battery to the
authorized distributor of the battery for the
adequate disposal.
25
 A Radiator

Fan

Deposit of
expansion

Engine cooling system

• Liquid cooling of the engine.
The fan spins at 95.30 °And stop á a
• The water pump in the engine circulates the 90 degrees
° Celsius. This condition isónormal and indicates
refrigerant in the cooling system.
that the cooling system works
• The resulting pressure from the heating of the system
good.
Cooling is regulated by a valve in the
radiator cover (A).
• The expansion of heat causes the excess of ! Warning:
refrigerant flows into the expansion tank. During operation, the refrigerant heats up
• When the refrigerant temperature drops, it a lot and is under pressure. In case of burns,
remaining refrigerant is sucked back into the rinse immediately with warm water. Do not remove the
cooling system . radiator cap, the radiator hose or others
components of the cooling system when the
• The fan cools the refrigerant that circulates through the
heating engine. Let the engine and the system of
radiator fins
cooling cool down.

26
 Soda
! Warning:
The refrigerant is toxic and poses a health risk.
Avoid contact between the refrigerant and the skin, eyes, and
clothing. If it gets in your eyes, rinse them immediately. Deposit
with water and contact a doctor.
Window expansion (A)
Immediately wash the affected areas with water and level
soap. If coolant is swallowed, get into
contact a doctor immediately. Change the
Filling
clothing that has come into contact with coolants.
Keep the refrigerant out of reach of children.
• Park the vehicle perpendicular to the ground on a surface
leveled using the side support. Remove the two screws to
access the expansion tank cap.
Specifications • Check the coolant level with the engine cold.

Antifreeze mixture 50:50 • Make sure the coolant level is between the markings.
Min and Max.
Recommended Brand
Motul: Moto cool expert, Castrol : Radicool • Always fill the coolant through the reservoir cap (A).

CantidadTotal : 1000 ml. • Always replace the coolant with the coolant
recommended only.
(750 ~ 780 ml in radiator & 220 ~
230 ml expansion tank. • Wear gloves while draining and filling the refrigerant.
• Do not fill through the radiator cap.

27
to
mm

A C

Maintenance
newspaper
Spark plugs Slack in the chain
• The slack of the chain will have to be
• Replace the spark plugs at 10,000 km. adjusted when necessary.
• Adjust the electrode. • The chain slack is 20 ~ 30 mm.
Electrode : 0.8 - 0.9 mm.
• The mark on the chain adjusters
it must be placed in the same way in
Whatí is it?
both sides.
(2 pieces.) CHAMPION (PRG6HCC)
Tighten the axle nut to 10 Kg.m
(LEFT 'A' THE
+ 'B'
98.1 N.m
(1 piece) CHAMPION (RER6YCA)
(Central 'C')
28
Cleaning and lubrication Cleaning and lubrication method
Chain with (O-ring) • Park the vehicle perpendicular to the ground on a
The transmission chain must be cleaned and lubricated. level surface. Clean the chain using a
according to the periodic maintenance program. lint-free cloth (if the chain is excessively
dirty, you should take it to the Bajaj dealer for a
appropriate cleaning.
• O-rings should always be kept wet
• Shake the can vigorously while keeping it upright
for better performance; lubricate the chain every until the noise of the steel ball inside
500 Km. it is heard evenly.
• The lubrication of the O-ring chain is • Keep the can of lubricant at the back of
the rear crown with a distance of 5 ~ 10 cm.
owner's responsibility. Use Bajaj lubricant
Chain Lube Spray available at distributors • Turn the wheel in the opposite direction and spray the lubricant.
in the middle part of the chain up to the length
Bajaj . total of the chain.

29
Liquid
brakes &
care
lighthouse
Front deposit Rear deposit

Brake fluid Condensation occurs when the atmospheric air contains

water vapor or humidity enters the lighthouse through the vents
• The front brake fluid reservoir is located in the due to the temperature difference. A thin layer can form.
right side of the handlebar. fog layer on the interior surface of the lighthouse

• The rearóbrake fluidí reservoir is located behind as The thin fog will clear and will come out through the grilles of
of the support of posapi s RH.é ventilation during normal operating conditions.

• To check the level of l íbrake pedal, park the The condensation and fogging of the lighthouse lens can occur
í
the vehicle ó
positioned vertically on a level surface. With during the rain or after washing.
the straight handlebar. The condensation of moisture inside the lighthouse lens
it will gradually disappear by turning on the lighthouse in the road light and
• Alwaysú make sure that the level of l íbrake fluid is é
above the 'MIN' mark indicated in the window of driving the vehicle at a speed of 30 to 40 km/h for about
inspection ó 15 minutes.
The evaporation time will vary depending on the humidity of the air.
• In case of a lower level, use s ó lo l íbrake fluid DOT-4
environment.
(from a sealed container) to fill and/or replace.

Lighthouse maintenance If the fog inside the lighthouse does not evaporate, take the
vehicle to the Authorized Bajaj Dealership for
The condensation inside the lighthouse is a inspection.
natural phenomenon.

30
Maintenance table
Periodical & lubrication
Maintenance & RECOMMENDED FREQUENCY
Mr. Service 1st 2nd 3rd
Operation Observations
No. Kms 500 3,000 5,500 Every 2500 Km

Make sure to avoid entering

1. Wash, clean, and dry it very well. water in the gasoline tank
motorcycle

2. Motor Oil C,R R R R R R R R SAE 10W50 API 'SL' or JASO 'MA2'

3. Oil filter R R R R

Wash the oil strainer in

4. Oil strainer CL CL CL CL CL
every oil change

CL, C&A at 20,000 Kms.

5. Spark plugs CL, C,A
C,A Change every 40,000 km

Change every 20,000 km. Clean.

6. Air filter element R R
if necessary

7. Paper filter for gasoline R R Change every 20,000 km.

8. Gasoline hoses C,R C,R Cambiar si es necesario

31
Maintenance table
Periodic & lubrication
& RECOMMENDED FREQUENCY
Sr. Service 1st 2nd 3rd
Operation Observations
No. Kms 500 3,000 5,500 Every 2500 Km

Review and adjust each

9. Valve clearance adjustment C, A C, A
20000 kms

Every 500 km for the client

10. C,L,A C,L,A
Lubricated chain wash with O rings

Air filter box drain tube

11. CL CL CL CL Limpiar cada 10000 kms.

Cleaning of the drain hole of

12. silencer CL CL CL CL CL CL CL

13. Cleaning the exhaust muffler CL CL CL CL CL CL CL With a brush

Use grease A P
14. Brake pedal pivot C,L,R C C, L, R C,L,RC,L,RC,L,RC,L,R C,L,R

Wear review of Change every 15000

15. C,R C,R C,R C,R R C,R C,R R
brake pads / Reno pads Kms.

Usable liquid (DOT4)

16. Brake fluid review and refill C,A,R C,A R

Braking system - check

17. C C C C C C C C
functionality, leaks, and any other damage

30
Maintenance table
Periodical & lubrication
RECOMMENDED FREQUENCY
Mr. Service 1st 2and 3rd
Operation Observations
No. Kms 500 3,000 5,500 Every 2500 Km

18. Free play on all wires C, A C, A C, A C, A C, A C, A C, A C, A

Electrical wiring & Battery

19. C,A,T C,A,T C,A,TC,A,TC,A,T C,A,T
connections - routing

20. Play in the steering system C, A C, A C, A C, A C, A C, A C, A C, A

Cleaning of the ignition switch and

21. of the wrist controls C,CL C, CL C,CL C,CL C, CL C,CL C, CL C, CLUse spray WD40

Cleaning and lubrication of the components C,CL C, CL C, Cl C, CL Use HP Lithon RR3 lithium grease for
22. of direction lubrication
L,R L,R L,R L,R

23. Side support pin CL,L CL, L CL,L CL,L

24. Tighten all the bolts CT CT CT CT CT CT CT CT Use AP grease

General lubrication - lever of

25. L L L L L L L L Use AP grease
brake and clutch lever

Use ready refrigerant

26. Coolant level in reservoir of C,A C,A C,A C,A C,A C,A C,A C,A
tousea50:50mixture
expansion

31
 Maintenance table
Periodical & lubrication
RECOMMENDED FREQUENCY
Sr. Service 1st 2and 3rd
Operation Observations
No. Kms 500 3,000 5,500 Every 2500 Km

Hoses of the system of

27. C C C C C C C
engine cooling

28. Radiator cooling fins C C C C C C

Applies to motorcycles with

29. Evapsystemdraintube CL CL CL CL CL CL CL CL EVAP system

It is recommended to use only the oil recommended by Bajaj.

C : Revisar, A : Ajustar, CL : Limpiar, R : Cambiar, T : Apretar, L : Lubricar

The following items are the responsibility of the client.

Oil, coolant liquid, filters, all types of grease, cleaning agents, cables, wear parts, rubber rings / oil seals /

pipes, joints, etc.

30
 Maintenance during storage
Maintenance without use is necessary if the • Fill 10% of pressure excessive air pressure in both tires.
vehicle remains off-road for • Do not apply oil on the front brake disc, to
more time (more than 15 days **). The correct and prevent oxidation. Ifó the front brake disc rusts
careful maintenance without prior use during storage, do not try to clean it with
soapy water. The oxidation will go ó out á
storing the vehicle will prevent the vehicle
automatically
á during the first application of the brake.
oxidation and other non-operational damages such as
fire risks. For the Battery
•
• Clean the vehicle thoroughly. wood, in a well-ventilated area.
• I emptied the fuel from the fuel tank and • Before taking the vehicle for your use.
(if the fuel remains for a longer time, • Recharge the battery at the service center
the fuel will break and the sticky substance authorized / battery distributor.
it could clog the carburetor. • Apply petroleum jelly on the terminals.
• Remove the spark plug and place several drops of oil on certain models).
engine in the cylinder. The engine of the beginning of one
same about slowly sometimes to Preparation for regular use after storage
cover the wall of the cylinder with oil and install the • Limpiar el vehículo
rear spark plug. • Make sure the spark plug is tightly secured.
• Place the vehicle in a box or on a stand • Fill the fuel tank with fuel.
so that both wheels lift off the ground. • Change the engine oil.
• Spray the oil on all metal surfaces • Check all points listed in the Controls section
without paint to prevent oxidation. Avoid oil security diaries.
in rubber parts or in brake linings.
• Check and inflate the tires to the correct pressure of the
• Completely cover the vehicle. Make sure to tires .
that the storage area is well organized
ventilated and free from any source of flames or
spark .
31
Activate your Warranty

01800 2252-569

[email protected]
www.bajajauto.mx

SPARE PARTS
GENUINE