Scribd
Upload
846 views2 pages

Diamond Antenna - A144s5

The document summarizes the specifications and installation instructions for a Diamond 2 Meter Yagi Antenna model A144-S5. It provides the antenna's key specifications including frequency range, gain, power rating, impedance, VSWR, front-to-back ratio, dimensions, and weight. Installation instructions recommend adjusting the elements to the proper position, weatherproofing connections, and mounting the antenna either vertically or horizontally while minimizing effects of nearby metal. Phasing of two antennas can be done using a special coaxial cable section.

Uploaded by

pepanc036gk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
846 views2 pages

Diamond Antenna - A144s5

The document summarizes the specifications and installation instructions for a Diamond 2 Meter Yagi Antenna model A144-S5. It provides the antenna's key specifications including frequency range, gain, power rating, impedance, VSWR, front-to-back ratio, dimensions, and weight. Installation instructions recommend adjusting the elements to the proper position, weatherproofing connections, and mounting the antenna either vertically or horizontally while minimizing effects of nearby metal. Phasing of two antennas can be done using a special coaxial cable section.

Uploaded by

pepanc036gk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Antenna Assembly: Provides step-by-step instructions for assembling the Diamond 2 Meter Beam Antenna with necessary precautions and installation tips.
  • Specifications: Details the technical specifications of the Diamond Antenna A144-S5, including frequency, gain, length, and other performance metrics.

A144-S5

2 Meter Yagi Antenna Specifications


Frequency: Gain: Power Rating: Impedance: VSWR: Front To Back Ratio: Boom Length: Longest Element: Driven Element diameter: Parasitic Elements diameter: Max. Mount diameter: Weight: 144-148 MHz 9.1 dBi 100 Watts 50 Ohms (Nominal) 1.4:1 (Nominal) 17 dB 37.4 950mm 42.9 1090mm 0.50 12.7mm 0.37 9.4mm 1.5 0.4 lbs. 0.81 kg

Figure 1

Antenna Assembly
(1) Remove antenna from package and adjust elements to proper position. You will find a small mark on the center of each element to aid in its positioning. Tighten each wingnut after verifying proper positioning. (2) Weatherproofing connections. As coaxial cables tend to absorb moisture through their connectors, it is recommended that the connector be sealed. There are several products available for this purpose, including a good grade of electrical type or a rubber compound tape.

Fabricated extension

Figure 2 DIAMOND ANTENNA Products are distributed by RF PARTS COMPANY


435 S. Pacific Street San Marcos, CA 92078 (760) 744-0900

www.diamondantenna.net

The Diamond 2 Meter Beam Antennas are easy to assemble and install. Only a few cautions are necessary in their installation. The A144S5 may be installed for either vertical or horizontal polarization. (a) Vertical polarization (preferred for FM operation): If mounting to a vertical support or pole at the boom center, be sure this support is non-metallic. A fiberglass or waterproofed hardwood extension should work satisfactorily. End mounting is a good option, as the coax cable may be run along the boom and down the vertical support. The idea is to minimize the effects of metal in the vertical plain. It will be necessary to fabricate an extension capable of sliding inside the boom, being secured by the screw passing through the boom (at the reflector element). Another way of mounting vertical beams is on a bracket to position beam away from the vertical support in order to reduce its effects. Coax should be run away from the beam at right angles (or off the reflector end). See Figure 2. (b) Horizontal mounting to the vertical support is easily accomplished with center boom mounting. (c) Phasing of two beams may be accomplished with a special coax phasing section using 75 ohm coaxial cable and Tconnector. Length approximately 2140 mm / 84 inches. Beam separation of approximately 40-48 is recommended. Note that the two antennas are mounted to the stacking boom in the same position. The cable connection must enter each from the same side as shown in Figure 4.
Position element for center marker

Tighten Wingnuts

Figure 3

Figure 4

A144-S5 2 Meter Yagi Antenna Specifications Frequency: 144-148 MHz Gain: 9.1 dBi Power Rating: 100 Watts Impedance: 50 Ohms (
The Diamond 2 Meter Beam Antennas are easy to assemble and install. Only a few cautions are necessary in their installation.

You might also like