Electronics 1
Lecture 2
Ahsan Khawaja
ahsan_khawaja@[Link] Lecturer Room 102 Department of Electrical Engineering
Electronic Materials
The goal of electronic materials is to generate and control the flow of an electric current. Electronic materials include:
1. Conductors: have low resistance which allows electric current flow 2. Insulators: have high resistance which suppresses electric current flow 3. Semiconductors: can allow or suppress electrical current flow
Insulators
Insulators have tightly bound electrons in their outer shell These electrons require a very large amount of energy to free them for conduction Lets apply a potential difference across the insulator above The force on each electron is not enough to free it from its orbit and the insulator does not conduct Insulators are said to have a high resistivity / resistance
Insulators
Insulators have a high resistance so current does not flow in them. Good insulators include:
Glass, ceramic, plastics, & wood
Most insulators are compounds of several elements. The atoms are tightly bound to one another so electrons are difficult to strip away for current flow.
Conductors
Conductors have loosely bound electrons in their outer shell These electrons require a small amount of energy to free them for conduction Lets apply a potential difference across the conductor above The force on each electron is enough to free it from its orbit and it can jump from atom to atom the conductor conducts Conductors are said to have a low resistivity / resistance
Conductors
Good conductors have low resistance so electrons flow through them with ease. Best element conductors include:
Copper, silver, gold, aluminum, & nickel
Alloys are also good conductors:
Brass & steel
Good conductors can also be liquid:
Salt water
The atomic structure of good conductors usually includes only one electron in their outer shell.
Conductor Atomic Structure
It is called a valence electron. It is easily striped from the atom, producing current flow.
Copper Atom
Semiconductors
A material whose properties are such that it is not quite a conductor, not quite an insulator.
Semiconductors have a resistivity/resistance between that of conductors and insulators. Their electrons are not free to move but a little energy will free them for conduction
Some common semiconductors
elemental
Si - Silicon (most common) Ge - Germanium
compound
GaAs - Gallium arsenide GaP - Gallium phosphide AlAs - Aluminum arsenide AlP - Aluminum phosphide InP - Indium Phosphide
(The resistance of a semiconductor decreases as the temperature increases.)
The Silicon, Si, Atom
Silicon has a valency of 4 i.e. 4 electrons in its outer shell This picture shows the shared electrons
Each silicon atom shares its 4 outer electrons with 4 neighbouring atoms
These shared electrons bonds are shown as horizontal and vertical lines between the atoms
Silicon the crystal lattice
If we extend this arrangement throughout a piece of silicon
We have the crystal lattice of silicon
This is how silicon looks when it is cold
It has no free electrons it cannot conduct electricity therefore it behaves like an insulator
Electron Movement in Silicon
However, if we apply a little heat to the silicon.
An electron may gain enough energy to break free of its bond It is then available for conduction and is free to travel throughout the material
Hole Movement in Silicon
Lets take a closer look at what the electron has left behind
There is a gap in the bond what we call a hole
Hole Movement in Silicon
This hole can also move
An electron in a nearby bond may jump into this hole Effectively causing the hole to move Like this
Semiconductor Valence Orbit
The main characteristic of a semiconductor element is that it has four electrons in its outer or valence orbit.
Crystal Lattice Structure
The unique capability of semiconductor atoms is their ability to link together to form a physical structure called a crystal lattice. The atoms link together with one another sharing their outer electrons. These links are called covalent bonds.
2D Crystal Lattice Structure
Semiconductors
An intrinsic semiconductor, also called an undoped semiconductor or i-type semiconductor, is a pure semiconductor without any significant dopant species present. An extrinsic semiconductor is a semiconductor that has been doped.
Doping
Relying on heat or light for conduction does not make for reliable electronics
To make the semiconductor conduct electricity, other atoms called impurities must be added. Impurities are different elements. This process is called doping.
Semiconductors can be Conductors
An impurity, or element like arsenic, has 5 valence electrons. Adding arsenic (doping) will allow four of the arsenic valence electrons to bond with the neighboring silicon atoms. The one electron left over for each arsenic atom becomes available to conduct current flow.
The Phosphorus Atom
Phosphorus is number 15 in the periodic table
It has 15 protons and 15 electrons 5 of these electrons are in its outer shell
Doping Making n-type Silicon
Suppose we remove a silicon atom from the crystal lattice and replace it with a phosphorus atom
We now have an electron that is not bonded it is thus free for conduction
Doping Making n-type Silicon
Lets remove another silicon atom and replace it with a phosphorus atom As more electrons are available for conduction we have increased the conductivity of the material
Phosphorus is called the dopant
If we now apply a potential difference across the silicon
Extrinsic Conduction n-type Silicon
A current will flow Note: The negative electrons move towards the positive terminal
N-type Silicon
From now on n-type will be shown like this.
This type of silicon is called n-type This is because the majority charge carriers are negative electrons A small number of minority charge carriers holes will exist due to electrons-hole pairs being created in the silicon atoms due to heat The silicon is still electrically neutral as the number of protons is equal to the number of electrons
The Boron Atom
Boron is number 5 in the periodic table
It has 5 protons and 5 electrons 3 of these electrons are in its outer shell
Doping Making p-type Silicon
As before, we remove a silicon atom from the crystal lattice
This time we replace it with a boron atom
Notice we have a hole in a bond this hole is thus free for conduction
Doping Making p-type Silicon
Lets remove another silicon atom and replace it with another boron atom As more holes are available for conduction we have increased the conductivity of the material
Boron is the dopant in this case
If we now apply a potential difference across the silicon
P-type Silicon
From now on p-type will be shown like this.
This type of silicon is called p-type This is because the majority charge carriers are positive holes A small number of minority charge carriers electrons will exist due to electrons-hole pairs being created in the silicon atoms due to heat The silicon is still electrically neutral as the number of protons is equal to the number of electrons
The p-n Junction
Suppose we join a piece of p-type silicon to a piece of n-type silicon
We get what is called a p-n junction
Remember both pieces are electrically neutral
The p-n Junction
When initially joined electrons from the n-type migrate into the p-type less electron density there
When an electron fills a hole both the electron and hole disappear as the gap in the bond is filled
This leaves a region with no free charge carriers the depletion layer this layer acts as an insulator
The p-n Junction 0.6 V
As the p-type has gained electrons it is left with an overall negative charge
As the n-type has lost electrons it is left with an overall positive charge
Therefore there is a voltage across the junction the junction voltage for silicon this is approximately 0.6 V
The Reverse Biased P-N Junction
Take a p-n junction Apply a voltage across it with the p-type negative n-type positive
Close the switch The voltage sets up an electric field throughout the junction
The junction is said to be reverse biased
The Reverse Biased P-N Junction
Negative electrons in the n-type feel an attractive force which pulls them away from the depletion layer
Positive holes in the ptype also experience an attractive force which pulls them away from the depletion layer
Thus, the depletion layer ( INSULATOR ) is widened and no current flows through the p-n junction
The Forward Biased P-N Junction
Take a p-n junction Apply a voltage across it with the p-type postitive n-type negative
Close the switch The voltage sets up an electric field throughout the junction
The junction is said to be forward biased
The Forward Biased P-N Junction
Negative electrons in the n-type feel a repulsive force which pushes them into the depletion layer
Positive holes in the ptype also experience a repulsive force which pushes them into the depletion layer
Therefore, the depletion layer is eliminated and a current flows through the p-n junction
The Forward Biased P-N Junction
At the junction electrons fill holes Both disappear as they are no longer free for conduction
They are replenished by the external cell and current flows
This continues as long as the external voltage is greater than the junction voltage i.e. 0.6 V
The Forward Biased P-N Junction
If we apply a higher voltage The electrons feel a greater force and move faster
The current will be greater and will look like this. The arrow shows the direction in which it conducts current
The p-n junction is called a DIODE and is represented by the symbol
