NodeB software installation
ISSUE 1.0
Huawei Confidential. All Rights Reserved
Objectives
Upon completion of this course, you will be
able to:
Master the XCT software installation of
NodeB
Master the LMT software installation of
NodeB
Master
Management
configuration file
of
BTS3812E
Internal Use
References
31041768-WCDMA
NodeB
Software Installation(V1.50)
Internal Use
Chapter 1 Overview
Chapter 2 Installing configuration tool
Chapter 3 Installing LMT Software
Chapter 4 Installing Software at NodeB Side
Internal Use
Overview
Data configuration tool
It include MSDE2000(Microsoft SQL Server 2000 Desktop Engine)
Release A and XCT software.
It is used for the data configuration management.
LMT software
It is the Operation & Maintenance (O&M) terminal of a NodeB
It is composed of the Operation & Maintenance system, Alarm
Management System, and Trace Viewer.
Software at NodeB side
It includes the NodeB software and data configuration files and is
distributed over boards in the NodeB.
The LMT software installation is prior to the installation of the software
at the NodeB side.
Internal Use
Chapter 1 Overview
Chapter 2 Installing configuration tool
Chapter 3 Installing LMT Software
Chapter 4 Installing Software at NodeB Side
Internal Use
Installation Environment
Hardware requirements
Item
Recommended
configuration
CPU
PIII 600Hz
P4 1.2GHz
RAM
128M
512M
Hard disk
10G
40G
Software requirements :
Item
Operating
System
Basic
configuration
Expected result
The OS can be either of the following:
"Microsoft Windows 2000 Professional" with
"Service Pack 2" or later patch release
Microsoft Windows XP
Internal Use
Installing MSDE2000 Release A
Follow the procedure below to install the MSDE2000 Release A:
Log in to the system as an administrator.
Make sure the directory D:\SQLSVRMSSQL does not exist or
is null.
Run install. bat in the directory <installation disk\MSDE2000A>
to install the MSDE2000 Release A.
Restart the PC .
Internal Use
Installing MSDE2000 Release A
Start MSDE2000 Release A:
Log in to the system as an administrator.
Double click the MSDE2000 icon on the status bar of the window.
From the pop-up window ,select Auto-start service when OS starts.
Click the start button if MSDE2000 is not started
Internal Use
Installing XCT
Before installing XCT software, make sure:
MSDE2000 is installed on the PC.
You have logged in to the system as an administrator.
Getting Started
Run SETUP. exe on the installation disk
In the window, click <Next> to continue
10
Internal Use
Installing XCT
11
In the window, read the license agreement. Select I accept these terms,
and click <Next> to continue
Internal Use
Installing XCT
12
Installing and Copying Files
In the window, select the target folder, and then click <Next > to
continue.
If such folder does not exist, the system prompts whether to create it.
Internal Use
Installing XCT
In the window, select the components to install, and then click <Next > to
continue.
In the window, check the installation information
13
Internal Use
Installing XCT
After the system finishes copying files, click <Finish > in the window as
shown;
Restart the PC to finish installation.
14
Internal Use
Chapter 1 Overview
Chapter 2 Installing configuration tool
Chapter 3 Installing LMT Software
Chapter 4 Installing Software at NodeB Side
15
Internal Use
Installation Environment
The standard software configuration requirements :
Items
16
Standard configuration
Operating system
Windows 2000 Professional (SP4)
or Microsoft Windows XP
Web browser
Microsoft Internet Explorer 5.5 or above
Internal Use
Installation of LMT Software
17
Start setup. exe
Accept license agreement
Learn installation guide
Check serial number
Choose destination location
Select setup type
Select program folder
Copy files
Complete installation
Internal Use
Chapter 1 Overview
Chapter 2 Installing configuration tool
Chapter 3 Installing LMT Software
Chapter 4 Installing Software at NodeB Side
18
Internal Use
Overview
The NodeB software is a compressed file. Normally, its name is
[Link].
There is only one data configuration file, that is, NodeBCfg. xml.
19
Internal Use
Preparation
Connecting LMT with NodeB
LMT6
iManager M2000
NodeB
IP over Ethernet
IPoA
RNC
LMT1
IPoA
Internet/DDN
Modem
NodeB
PSTN
Modem
IP over Ethernet
Modem
LMT2
LMT5
PSTN
Modem
LMT4
LMT3
20
O&M mode
Description
Near end O&M
The LMT is connected to the NodeB through the Ethernet port on the NMPT, as the LMT1 and LMT2 .
Far end O&M
The LMT is connected to the NodeB through the M2000 Server and the IP over ATM (IPoA) channel
between the NodeB and the RNC, as the LMT4 , LMT5 , and LMT6.
Remote O&M
The LMT is connected to the NodeB through a Modem, as the LMT3
Internal Use
Installation Procedure
Start
Query NodeB software
version
Right version?
Upgrade NodeB
software
Y
Record the local IP
address
Download data
configuration file
Configured with
RRUs?
Y
Install RRU software
Reset NodeB
Run for a period of
time
Run stablly
Handl faults
Y
Sychronize NodeB
software version
End
21
Internal Use
Querying NodeB Software Version
A NodeB can support two software versions, an active version and
a standby version. The standby version is null for a new NodeB.
Using LST SOFTWARE to get the NodeB software version.
Record the version information and check whether the current
NodeB software version is the one requested
22
Internal Use
Record Local IP Address
23
The default IP address of NMPT Ethernet port of the NodeB for
local maintenance is [Link] \ [Link]
Internal Use
Downloading Data Configuration File
24
Internal Use
Installing RRU Software
If RRUs (Radio Remote Unit) are configured in NodeB, then the
RRU software should be installed after downloading the data
configuration file.
RRU software is included in the NodeB software package.
The RRU software and RRU BOOTROM have already exist under
the active path in the NMPT of the new NodeB.
Its only need to activate both of them to complete the RRU
software installation.
25
Internal Use
Installing RRU Software
26
Internal Use
Installing RRU Software
27
Internal Use
Resetting NodeB
To make the data configuration file effect, reset the NodeB using
the MML command RST SYS.
The local IP address in the data configuration file replaces the
default IP address of the NMPT Ethernet port
28
Internal Use
Synchronizing NodeB Software Version
There are two paths in the NMPT file partition, that is the active
path and the standby path.
The path saving the running NodeB software is called the active
path, while that saving the standby NodeB software is called the
standby path. Users can use MML command ACT SOFTWARE to
interchange these two paths.
After installing the software at NodeB side and running the software
for a period (at least 72 hours) to verify its reliability and stability,
then synchronize the software in the active path with that in the
standby path in the file partition of the NMPT. (SYN SOFTWARE)
29
Internal Use
30
Internal Use
