HW Config
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.1
Configurable Components
AS OS
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.2
Adapting HW Config
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.3
Adapting HW Config
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.4
Exercise: AS HW Config (Central AS)
Slot 1 3 5 6
PS 407 CPU CP CP
417-4DP DP Eth
( UR1 or UR2)
X1
X2
MPI
DP
ET 200M
PS IM SM SM SM SM
153-2
PROFIBUS
address
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.5
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.6
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.7
Exercise: AS HW Config (PROFIBUS DP CiR Compatibility)
PS 407 CPU CP CP
417-4DP DP Eth
( UR1 or UR2)
MPI
DP
CiR
PS IM SM SM SM SM
PROFIBUS- 153-2
address
ET 200M
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.8
Exercise: AS HW Config
(PROFIBUS DP Set Parameters for CiR Object)
Max. bytes
per slave
10 x 244 = 2240 I / 2240 O
Must be made
available as
PII/PIQ via the
CPU
properties!
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.9
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.10
Exercise: AS HW Config
(Set Parameters for PROFIBUS DP CiR Module)
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.11
Exercise: AS HW Config (CPU process image partition)
PIP process image partition
=
PIPI (inputs)
+
PIPO (outputs) CPU DP master
OS buffer
PIPI1
Inputs
OB32
OB32 2
PIP1
PIPO1 Trt 1
OB35 DO AI
PIPI2 IM
PIP2 153
3 P P
OB35 I I
Out- P P
puts 2 1
PIPO2
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.12
Exercise: AS HW Config (CPU process image partition)
PIP process image partition
=
PIPI (inputs)
+
PIPO (outputs) CPU DP master
OS buffer
PIPI1
Inputs
OB32
OB32 2
PIP1
PIPO1 Trt 1
OB35 DO AI
PIPI2 IM
PIP2 153
3 P P
OB35 I I
Out- P P
puts 2 1
PIPO2
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.13
Exercise: AS HW Config
(Driver Concept/Symbolic Channel Names)
PS 407 CPU CP CP
417-4DP DP Eth
OB 32 <-> PIS 1
(UR1 or UR2)
OB 35 <-> PIS 2
MPI
DP
PS IM SM SM SM SM
PROFIBUS 153-1
T T T T
addr. P P P P
A A A A
1 1 1 1
Name_channel_0
Name_channel_1
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.14
Exercise: AS HW Config
(Driver Concept/Symbolic Channel Names)
PS 407 CPU CP CP
417-4DP DP Eth
OB 32 <-> PIS 1
(UR1 or UR2)
OB 35 <-> PIS 2
MPI
DP
PS IM SM SM SM SM
PROFIBUS 153-1
T T T T
addr. P P P P
A A A A
1 1 1 1
Name_channel_0
Name_channel_1
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.15
Compiling and Downloading the AS HW Config
Downloading the Hardware Configuration only takes place after
the following steps have been carried out with NetPro:
The network configuration has been carried out and
connections from the ES to other stations (PC, AS) were set
up.
Connections were also configured between the devices (AS,
OS) to allow data exchange during process runtime.
Go to the chapter on NetPro first
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.16
Exercise: SIMATIC PC Station/OS HW Config
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.17
Exercise: SIMATIC PC Station/OS HW Config
Station Configuration Editor SIMATIC PC station
was created with PCS 7 when HW Config is configured in the
the PC was installed. project in the SIMATIC Manager
Is configured according to the subsequent and downloaded to the target PC.
use of the PC as ES and/or OS
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.18
Compiling and Downloading the OS HW Config
Downloading the Hardware Configuration only takes place after
the following steps have been carried out with NetPro:
The network configuration has been carried out and
connections from the ES to other stations (PC, AS) were set
up.
Connections were also configured between the devices (AS,
OS) to allow data exchange during process runtime.
Go to the chapter on NetPro first
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.19
Exercise: Download the AS HW Config to the PLC (1)
1
PS 407 CPU CP CP
417-4DP DP Eth
UR1
or
UR2
MPI DP Ind. Ethernet
1 2
2
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.20
Exercise: Download the AS HW Config to the PLC (2)
1
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.21
Exercise: Download the AS HW Config to the PLC
(Check CiR Compatibility - 1)
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.22
Exercise: Download the AS HW Config to the PLC
(Check CiR Compatibility - 2)
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.23
Exercise: Download the AS HW Config to the PLC
(Check CiR Compatibility - 3)
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.24
Exercise: Download PC Configuration
Download to target
SIMATIC PCS 7 Date: 26.04.2018
SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File:ST-PCS7SYS_hwkonf_E.25
