Intro to Commercial Kitchens
Fundamentals of Planning and Design I
Interior Design 321
Programming
Gather Information
Observe the current facility during and after hours of operation.
Interview client/owner, chef/cook, AND support staff. Ask what
they like/dislike about their currentfacility.
Observe similar establishments and tour them if possible.
Questions to ask your client
What is the menu? Are you providing food made to order all day or
take away/grab go items? Do you see any drastic changes to the
menu in the future?
How much storage do you need? How much frozen, dry, freshand
cold?
Programming
Questions to ask your client
How many people do you anticipate providing food for on a daily
basis? How many during the breakfast/lunch/dinner rushes?
How many employees will be working in the kitchen during the
busiest times of the day?
Where will deliveries be made? What day of theweek? Time of
day?
What kind ofequipment is needed based on your menu?
Ask your client if there is a establishment he/she likes andwhy.
Codes
International Building Code(IBC)
American Disabilities Act (ADA)
Refer to ICC/ANSIA117.1 – Accessible and Useable Buildings and
Facilities
U.S Food and Drug Administration (FDA) Food Code
Local, state, tribal, and federal regulators use this document as a
model to develop or update their own food safety rules and to be
consistent with national food regulatory policy. In the State of
Washington, our food safety rules are located in the Washington
Administrative Code (WAC), Chapter 246-215 (Washington State
Retail Food Code)
Six Components to Commercial Kitchens
1. Clean/Wash 4. Storage
2. Food Preparation 5. Service
3. Cooking 6. Delivery
Six Components to Commercial Kitchens
Clean/Wash
Includes: Three-compartment sinks, pre-wash sinks, dishwashers, etc.
Location: Near kitchen entrance for dish dropoff
Wash area can be divided by specific activity – ex. Tray/dish rise off
area, drying racks,etc.
Six Components to Commercial Kitchens
Clean/Wash
A three-compartment sink is required for utensil washing. Sinks
must have adequate drain boards, racks, or tables large enoughto
accommodate all soiled and cleaned items that may accumulate
during hours of operation.*
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Six Components to Commercial Kitchens
Clean/Wash
A mechanical dishwasher may be used in addition to theutensil
sinks.*
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Six Components to Commercial Kitchens
Food Preparation Area
Includes: Food prep sink, cutting areas,etc.
Location: Near cooking and service areas; have easy access to
storage areas.
Food preparation area can be divided by activity – ex.Veggie
wash/chop, dry mixing area, plating area,etc.
Six Components to Commercial Kitchens
Food Preparation Area
One or more food preparation sinks, with an indirect waste
drain, are required if produce is cleaned on site or if the ice bath
method is used to cool liquidfoods.*
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Six Components to Commercial Kitchens
Food Preparation Area
Food establishments must have designated food preparation sinks
that are:
a) Sufficient in number and sizeto
wash, soak, rinse, drain, cool, thaw, or otherwiseprocess
any food that requires placement in a sink.*
• Washington Accessibility Code (WAC)
Chapter 246-215 (Washington State Retail Food Code)
Six Components to Commercial Kitchens
Food Preparation Area
Food establishments must have designated food preparation sinks
that are:
b) Appropriate for the menu, method of food
preparation, and volume of foodprepared.*
• Washington Accessibility Code (WAC)
Chapter 246-215 (Washington State Retail Food Code)
Six Components to Commercial Kitchens
Food Preparation Area
Food establishments must have designated food preparation sinks
that are:
c) Not used for hand washing, utensil washing, orother
activities that could contaminatefood.*
• Washington Accessibility Code (WAC)
Chapter 246-215 (Washington State Retail Food Code)
Six Components to Commercial Kitchens
Cooking
Includes: Convection ovens, stoves, microwaves, fryers, panini
makers, grills, etc.
Location: Adjacent to food preparationarea; near storage areas.
Cooking areas can be divided by activity – ex. Baking area, frying
station, grilling station, etc.
Six Components to Commercial Kitchens
Cooking
Verify equipment ventilation needs: Type I vs. Type II hoods
Type I hoods carry a listing label and are manufactured and installed
according to the manufacturer's and listing agencies' requirements. Theyare
designed to handle grease and include a number of integrated components
within the hood.
Type II hoods are used in the collection of steam, vapor, heat, and odors—but
not grease.
Six Components to Commercial Kitchens
Storage
Includes:
Cold Storage – refrigerators andfreezers
Dry Storage –shelving
Location: Locate near delivery area
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Six Components to Commercial Kitchens
Storage
Adequate refrigerated storage must be available for theseparation of
raw and ready-to-eat foods.*
Refrigeration requirements are based on your menu. Coolingof
potentially hazardous foods will require equipment that is capable of
meeting cooling requirements for PHF’s.*
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Six Components to Commercial Kitchens
Service
Includes: Food “drop off” area, warmers, sneezeguards, etc.
Location: Adjacent to seating areas if applicable, food preparation
Six Components to Commercial Kitchens
Service
Sneeze guards are required for displayed foods such as buffet
lines, salad bars, self-serve foods, condiments, etc.
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Six Components to Commercial Kitchens
Delivery
Includes: Inventory desk/computer
Location: Ideal tolocate near loading dock/delivery door and
storage areas
Size delivery door (and other doors) to allow adequate clearance
for items stored/transported (ex. palates, dish return carts, etc.)as
well as for the installation of new and future equipment.
Six Components to Commercial Kitchens
Support Spaces
Toilet Rooms
The food establishment permit holder must ensure that toilet
rooms are conveniently located within two hundred feet of the
food establishment and accessible to employees during all hoursof
operation.
May be used jointly by patrons and employees, providedpatrons
accessing the toilet rooms are excluded from food preparation
areas and unpackaged food storage areas.
Six Components to Commercial Kitchens
Support Spaces
Janitor Room
A mop/utility sink is required and must be located so foods arenot
contaminated.
May include washer/dryer for linen laundering, mop sink, hot
water heater, cleaser/chemical storage, etc.
Other
Provide storage area for employee’s personalitems
Provide area for disposal of garbage, recycling,etc.
Six Components to Commercial Kitchens
Additional Information
Hand washing sinks are required in all food preparation
areas, service areas and restrooms. Each sink must be equipped
with hot and cold running water with a mixing faucet, soap, paper
towel dispensers, and hand washing reminder signs.*
Handwashing sinks must be sized to allow employee to wash hands
simultaneously.
Floor sinks required forequipment that requires indirect waste
lines – three compartment sinks, espresso machines, etc.
Splash guards around sinks may be required to prevent
contamination of foods and food contactsurfaces.
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Six Components to Commercial Kitchens
Additional Information
All food equipment must be certified by an American National
Standards Institute (ANSI)-accredited certification program (i.e.
NSF). No home-style equipment isallowed.
* Spokane Regional Health Department
Plan Review Guidelines for Food Establishments
Schematic Plans
Schematic Plans
WASH
FOODPREP.
SERVICE
STORAGE
CUSTOME POINT OFSALE
R
ENTRANCE
CUSTOMER
WAITING/
CUSTOMEREXIT
CONDIMENTS
Materials
Flooring
Non-slip
Cove base
Smooth, easily cleanable, non-absorbent, and durable
Examples: Quarry tile, non-slip sheet vinyl
Materials
Walls
Easy to clean
Provide stainless steel finish behind ovens, grills, fryers andany
other equipment that emits high levels ofheat.
Provide ceramic tile/stainless steel/frp (fiberglass reinforced panels
– most cost effective) throughout kitchen ifbudget allows.
If budget is a consideration, provide frp in wetareas and semi-gloss
paint
Use semi-gloss paint throughout
Materials
Ceilings
Easy to clean
Gwb w/ semi-gloss paint or mylar suspendedceiling
Countertops
Smooth, easy to clean, anti-microbial
Free of breaks, open seams, cracks, chips, inclusions, pits, and
similar imperfections
Free of sharp internal angles, corners, andcrevices
Finished to have smooth welds andjoints
Example: stainless steel
Not to be used: Copper, galvanized metal,wood
Lighting
Light Fixtures in food preparation areas to have protectivecovering
over lamp.
If menu boards are used and are notelectronic, provide adequate
light to illuminate boards.
Provide adequate light levels for the activities of the space.
Spokane Regional Health District
Plan Review Guidelines for Food Establishments
Before Construction:
Submit proposed menu: include all foods and beverages that will be
prepared and served.
Submit food preparation sheets: include a description of allfood
preparation steps and an estimate of the maximum number of
meals served per day.
Spokane Regional Health District
Plan Review Guidelines for Food Establishments
Before Construction:
Submit plans – include the following:
1) Site plan
2) Building layout including food prep, dining, serving and storage
areas, and restrooms
3) Equipment layout including make and model numbers
4) Electrical, plumbing and ventilation systemlayout
5) Garbage storage and cleaning facilities
6) Storage area for employees’ personalitems
7) Number of seats for patrons (ifapplicable)
Equipment Plan & Schedule
Important Points to Remember
GATHER INFORMATION – Interview your client and their
support staff. Research similar establishments.
IDENTIFY what type of food service your client is
providing, the spaces needed, and determine what equipment
is needed.
VERIFY IBC, accessibility, and local/state/federal food code
requirements.
EXAMINE the site. Identify entrances/exits, restrooms (if
existing), pedestrian traffic (existing and future),
utilities, loading dock/area, garbage
enclosures, etc.
