WELCOME TO
PROJECT
FIRE DETECTOR
FIRE DETECTOR
Submitted To
DR. MD. SUJAN ALI (SHEIKH SUJAN ALI)
Professor
Dept. of Computer Science and Engineering
Jatiya Kabi Kazi Nazrul Islam University
FIRE DETECTOR
Presented by
Smita Moni Roy Suchi
Roll:19102032
Session:2018-19
Dept. of Computer science and Engineering
Jatiya Kabi Kazi Nazrul Islam University
Outlines
Block Project Project About
Diagram Features Objectives project
Circuit Applications Advantages
Flowchart
Diagram
2019 2020
Future Limitations
Scopes
About Project
2. The primary purpose of fire
alarm system is to provide an
early warning of fire so that
people can be evacuated and
immediate action can be taken to
stop or eliminate of the effect as
1. Fire Detector is a simple soon as possible.
circuit that detects the fire and
activates the Siren Sound or
Buzzer. 3. Here, we use a flame sensor
that constantly detect the
presence of flame or fire. When
fire is detected, it provides a
high signal and turning ON the
buzzer and LED.
OBJECTIVES 01 In this project, our main objective is to
interface flame sensor with Arduino UNO.
Flame Sensor reads IR radiation as
02 analog data and sends it to Arduino.
Arduino processes data provided by
03 Flame Sensor. It produce digital data to
LED and buzzer.
When fire is detected, buzzer converts
04 digital signal into sound signal and LED
will start flash.
Features
Interfacing flame sensor with Arduino.
The flame sensor can detect flame roughly
0.8 m.
The detection angle is roughly 60 degrees.
Using Arduino as a microcontroller.
Block
Diagram
LOREM IPSUM DOLOR SIT AMET,
CU USU AGAM INTEGRE IMPEDIT.
Circuit
Diagram
LOREM IPSUM DOLOR SIT AMET,
CU USU AGAM INTEGRE IMPEDIT.
Flow Chart
Applications
Public and commercial building
Hospitals
Trains
Aircraft hangars
Hydrogen station
Oil and gas pipelines
Advantages
Safety Benefits.
Minimization of Costs.
Quicker Response Times.
Self Monitoring System.
Limitations
This is a mini module of Fire
Detector.
It’s only applicable for a small
range of area.
Buzzer’s sound producing
capability is also low.
It cannot detect smoke and gas.
It cannot notify the fire control
department automatically.
Future Scopes
Due to limited financial support, we have
made a mini Fire Detector system which is
not usable for large range of areas.
The circuit can be expanded by
incorporating a passive infrared sensor.
We will use gas and smoke sensor so that
it can be able to detect smoke and gas.
We will add fire alarm system to notify the
fire control department automatically.
Thank You