Final Year Project Progress Presentation
2K20 – Session “Zero Presentation”
Department of Electrical Engineering 1
“PLC-Based pick and
place automation system with
conveyer integration”
Supervised by: Dr. Ammad Jadoon
Department of Electrical Engineering 2
Group Members
Muhammad Faizan Jamshad – CGPA (2.84) (Group Leader)
Muhammad Shehriyan Nadeem – CGPA (3.51)
Muhammad Ahsan – CGPA (2.65)
Muzamil Hussain – CGPA (2.18)
Department of Electrical Engineering 3
Table of Contents
Research Area
Research Domain
Area of Interest
Objectives (proposed project goals)
Literature View
Block Diagram
Flow Diagram
Hardware /Software Availability
Department of Electrical Engineering 4
Research Area
Industrial automation and control systems.
With advancements in technology, industries are increasingly looking
to automate their operations to improve efficiency, reduce human
error, and enhance productivity. By focusing on a PLC-based pick and
place automation system, we have targeted a key aspect of industrial
automation that finds applications in various sectors, such as
automotive, electronics, food processing, and more. Also through this
project we will be able to gain hands-on experience with
Programmable Logic Controllers (PLCs), which are widely used in
industrial automation.
Department of Electrical Engineering 5
Objectives
The objective of this project is to design, develop, and implement a
PLC-based pick and place automation system with conveyor
integration to optimize the material handling process, enhance
productivity, and minimize human intervention in industrial settings.
• Outcomes/ Achievements:
1. PLC Overview 6. Safety Measures.
2. Automated Material Handling. 7. Performance Optimization.
3. Pick and Place Mechanism. 8. Cost Effectiveness.
4. Sensors & Conveyor integration. 9. Industrial Revolution.
5. HMI (Human-Machine Interface). 10. Future Scope.
Department of Electrical Engineering 6
Block Diagram
Department of Electrical Engineering 7
Flow Diagram
Department of Electrical Engineering 8
Hardware /Software Availability
This project will be solely based on hardware. It will contain following
components (changes expected):
• PLC (Programmable Logic Controller) Electromagnet
◾
• Push Buttons Conveyor Belt
◾
• LED's Proximity Sensor
◾
• Pneumatic Actuator Roller ◾
• Pneumatic Pipes Connecting Rod
◾
• Valves Shaft, Motor
◾
• Supporting Frame Joint &Fixtures
◾
• Power Supply Circuit
Department of Electrical Engineering 9
