From: "osyoyu (Daisuke Aritomo) via ruby-core" Date: 2025-05-17T11:18:11+00:00 Subject: [ruby-core:122170] [Ruby Feature#21347] Add `open_timeout` as an overall timeout option for `Socket.tcp` Issue #21347 has been updated by osyoyu (Daisuke Aritomo). I am +1 to this proposal. As a `Socket.tcp` / `TCPSocket` user, I am usually concerned about the time required to open the connection as a whole, rather than name resolution and connect(2) as separate parts. I also like that the mental model aligns with implementations in other languages (`net.DialTimeout` in Go to name one). In stdlib, not only net/http but net/ftp, net/pop and net/smtp will all benefit from an `open_timeout` option in TCPSocket. They all provide only `open_timeout`, and do not support separate timeouts for DNS resolution and connection. `Timeout.timeout` is used for implementing timeouts, which is not ideal in terms of resource usage. (See https://github.com/ruby/net-http/issues/6 for more context) Just out of curiosity: Is the example given in https://bugs.ruby-lang.org/issues/21347#note-1 a case when `connect_timeout` is 1000 ms (not 100 ms) ? ---------------------------------------- Feature #21347: Add `open_timeout` as an overall timeout option for `Socket.tcp` https://bugs.ruby-lang.org/issues/21347#change-113319 * Author: shioimm (Misaki Shioi) * Status: Open ---------------------------------------- I propose to add an overall timeout option to `Socket.tcp` (and `TCPSocket.new`) ### Background Currently, `TCPSocket.new` and `Socket.tcp` accept two kind of timeout options: - `resolv_timeout`, which controls the timeout for DNS resolution - `connect_timeout`, which controls the timeout for the connection attempt With the introduction of Happy Eyeballs Version 2 (as per [RFC 8305](https://datatracker.ietf.org/doc/html/rfc8305)) in[ Feature #20108](https://bugs.ruby-lang.org/issues/20108) and [Feature #20782](https://bugs.ruby-lang.org/issues/20782), both address resolution and connection attempts are now parallelized. As a result, the sum of `resolv_timeout` and `connect_timeout` no longer represents the total timeout duration. This is because, in HEv2, name resolution and connection attempts are performed concurrently, causing the two timeouts to overlap. Example: When `resolv_timeout: 200ms` and `connect_timeout: 100ms` are set: 1. An IPv6 address is resolved after the method starts immediately (IPv4 is still being resolved). 2. A connection attempt is initiated to the IPv6 address 3. After 100ms, `connect_timeout` is exceeded. However, since `resolv_timeout` still has 100ms left, the IPv4 resolution continues. 4. After 200ms from the start, the method raises a `resolv_timeout` error. In this case, the total elapsed time before a timeout is 200ms, not the expected 300ms (100ms + 200ms). Furthermore, in HEv2, connection attempts are also parallelized. It starts a new connection attempts every 250ms for resolved addresses. This makes the definition of `connect_timeout` even more ambiguous���specifically, it becomes unclear from which point the timeout is counted. Additionally, these methods initiate new connection attempts every 250ms (Connection Attempt Delay) for each candidate address, thereby parallelizing connection attempts. However, this behavior makes it unclear from which point in time the connect_timeout is actually measured. Currently, a `connect_timeout` is raised only after the last connection attempt exceeds the timeout. Example: When `connect_timeout: 100ms` is set and 3 address candidates: 1. Connect to address `a` at t=0ms. 2. Connect to address `b` at t=250ms. 3. Connect to address `c` at t=500ms. 4. If all fail, the exception is raised at t=1500ms (1000ms after `c`, 1250ms after `b`, 1500ms after `a`). 1. Start a connection attempt to the address `a` 2. 250ms after step 1, start a new connection attempt to the address `b` 3. 500ms after step 1, start a new connection attempt to the address `c` 4. 1000ms after step 3 (1000ms after starting the connection to `c`, 1250ms after starting the connection to `b,` and 1500ms after starting the connection to `a`) `connect_timeout` is raised This behavior aims to favor successful connections by allowing more time for each attempt, but it results in a timeout model that is difficult to reason about. These methods have supported `resolv_timeout` and `connect_timeout` options even before the introduction of HEv2. However, in many use cases, it would be more convenient if a timeout occurred after a specified duration from the start of the method. Similar functions in other languages (such as PHP, Python, and Go) typically allow specifying only an overall timeout. ### Proposal I propose adding an `open_timeout` option to `Socket.tcp` in the following PR, which triggers a timeout after a specified duration has elapsed from the start of the method. https://github.com/ruby/ruby/pull/13368 The name `open_timeout` aligns with the existing accessor used in `Net::HTTP`. If `open_timeout` is specified together with `resolv_timeout` and `connect_timeout`, I propose that only `open_timeout` be used and the others be ignored. While it is possible to support combinations of `open_timeout`, `resolv_timeout`, and `connect_timeout`, doing so would require defining which timeout takes precedence in which situations. In this case, I believe it is more valuable to keep the behavior simple and easy to understand, rather than supporting more complex use cases. If this proposal is accepted, I also plan to extend `open_timeout` support to `TCPSocket.new`. While the long-term future of `resolv_timeout` and `connect_timeout` may warrant further discussion, I believe the immediate priority is to offer a straightforward way to specify an overall timeout. ### Outcome If `open_timeout` is also supported by `TCPSocket.new`, users would be able to manage total connection timeouts directly in `Net::HTTP#connect` without relying on `Timeout.timeout`. https://github.com/ruby/ruby/blob/aa0f689bf45352c4a592e7f1a044912c40435266/lib/net/http.rb#L1657 -- https://bugs.ruby-lang.org/ ______________________________________________ ruby-core mailing list -- ruby-core@ml.ruby-lang.org To unsubscribe send an email to ruby-core-leave@ml.ruby-lang.org ruby-core info -- https://ml.ruby-lang.org/mailman3/lists/ruby-core.ml.ruby-lang.org/