H3C CLOUD LAB基础实验 使用两台具有路由功能三层交换机，进行不同VLAN下PC的通信

一:实验拓扑图

二：设备配置

        1. pc端设置

                不同于eve中，H3C中不用指令形式配置ip,网关，而是用一个界面配置（右键pc找到配置），比较方便。

如图：

        2.交换机配置

        （1）左侧交换机配置：

<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]
[H3C]vlan 10
[H3C-vlan10]port gi
[H3C-vlan10]port GigabitEthernet 1/0/1
[H3C-vlan10]exit
[H3C]vlan 20
[H3C-vlan20]port gi
[H3C-vlan20]port GigabitEthernet 1/0/2
[H3C-vlan20]exit
[H3C]vlan 30
[H3C-vlan30]exit
[H3C]int vlan 10
[H3C-Vlan-interface10]ip add 192.168.10.254 24
[H3C-Vlan-interface10]exit
[H3C]int vlan 20
[H3C-Vlan-interface20]ip add 192.168.20.254 24
[H3C-Vlan-interface20]exit
[H3C]int vlan 30
[H3C-Vlan-interface30]ip add 192.168.30.1 24
[H3C-Vlan-interface30]exit
[H3C]int gi 1/0/3
[H3C-GigabitEthernet1/0/3]port link-type trunk
[H3C-GigabitEthernet1/0/3]port trunk permit vlan all
[H3C-GigabitEthernet1/0/3]exit

        （2）右侧交换机配置：

<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]
[H3C]vlan 10
[H3C-vlan10]port gi
[H3C-vlan10]port GigabitEthernet 1/0/1
[H3C-vlan10]exit
[H3C]vlan 20
[H3C-vlan20]port gi
[H3C-vlan20]port GigabitEthernet 1/0/2
[H3C-vlan20]exit
[H3C]vlan 30
[H3C-vlan30]exit
[H3C]int vlan 10
[H3C-Vlan-interface10]ip add 192.168.10.253 24
[H3C-Vlan-interface10]exit
[H3C]int vlan 20
[H3C-Vlan-interface20]ip add 192.168.20.253 24
[H3C-Vlan-interface20]exit
[H3C]int vlan 30
[H3C-Vlan-interface30]ip add 192.168.30.2 24
[H3C-Vlan-interface30]exit
[H3C]int gi 1/0/3
[H3C-GigabitEthernet1/0/3]port link-type trunk
[H3C-GigabitEthernet1/0/3]port trunk permit vlan all
[H3C-GigabitEthernet1/0/3]exit

注意，两个交换机上vlan上的ip要不同，否则会不停报地址错误，但是可以正常ping通。

三：实验结论

        四个pc，分别位于两组vlan中，经过配置可以进行不同vlan的通信。

PS：数通小白一枚，记录学习。