aurora协议nfc流控verilog实现

最新推荐文章于 2025-08-14 09:45:18 发布

hahaha6016

最新推荐文章于 2025-08-14 09:45:18 发布

阅读量448

点赞数 4

CC 4.0 BY-SA版权

分类专栏：硬件设计文章标签： fpga开发

本文链接：https://blog.csdn.net/dong6016/article/details/150112983

硬件设计专栏收录该内容

210 篇文章

订阅专栏

/*
1.https://blog.csdn.net/qq_45634652/article/details/137179556
2.https://blog.csdn.net/H19981118/article/details/141529623
3.https://www.baidu.com/link?url=R18NjfXtTOPfWDpgX5m4kr9MroGE5TMkqqn7afyrV7mcmh8khx6lyVRQQkE45q7R01NW96M_OPs98uoZuPMjtK&wd=&eqid=a660df4d0109eaa30000000568972172

module nfc_design
(
   input            i_clk,
   input            i_rst_n,
   input           i_fifo_half_full,

   input            i_nfc_ready,
   output reg        o_nfc_valid,
   output reg[15:0]   o_nfc_data
);

   localparam IDLE        = 4'd0;
   localparam SEND_OFF_DATA = 4'd1;
   localparam SEND_OFF_DONE = 4'd2;
   localparam SEND_ON_DATA = 4'd3;
   localparam SEND_ON_DONE = 4'd4;

   reg[3:0]nfc_ctrl_state;

   always@(posedge i_clk or negedge i_rst_n)begin
       if(i_rst_n==1'b0)begin
           nfc_ctrl_state <= IDLE;
           o_nfc_valid <= 1'b0;
           o_nfc_data <= 'd0;
       end
       else begin
           case(nfc_ctrl_state)
           IDLE:begin
               if(i_fifo_half_full)begin
                   nfc_ctrl_state <= SEND_OFF_DATA;
                   o_nfc_valid <= 1'b1;
                   o_nfc_data <= {7'd0,1'b1,8'd0};
               end
           end
           SEND_OFF_DATA:begin
               if(o_nfc_valid == 1'b1 && i_nfc_tready == 1'b1) begin
                   nfc_ctrl_state <= SEND_OFF_DONE;
                   o_nfc_valid <= 1'b0;
               end
           end
           SEND_OFF_DONE:begin
               if(!i_fifo_half_full) begin
                   nfc_ctrl_state <= SEND_ON_DATA;
                   o_nfc_valid <= 1'b1;
                   o_nfc_data <= {7'd0,1'b0,8'd0};
               end
           end
           SEND_ON_DATA:begin
               if(o_nfc_valid == 1'b1 && i_nfc_tready == 1'b1) begin
                   nfc_ctrl_state <= SEND_ON_DONE;
                   o_nfc_valid <= 1'b0;
               end
           end
           SEND_ON_DONE:begin
               nfc_ctrl_state <= IDLE;
                   o_nfc_valid <= 1'b0;
                   o_nfc_data <= {7'd0,1'b0,8'd0};
           end
           default:begin
               ;
           end
           endcase
       end
   end

endmodule