hyw15019042884的博客

#define BEEP D5 void setup() { Serial.begin(115200);//波特率为115200 pinMode(BEEP,OUTPUT);//设置引脚为输出 digitalWrite(BEEP,HIGH);//将蜂鸣器初始化为高电压，阻止开始时就鸣叫 } void loop() { int cmd; if(Serial.available()>0)//检测是否有数据 { .

void setup() { // put your setup code here, to run once: pinMode(D5,OUTPUT);//将D5引脚初始化为输出模式 } void loop() { // put your main code here, to run repeatedly: digitalWrite(D5,HIGH);//D5进行高电压 delay(1000); digitalWrite(D5,LOW);/