Ubuntu20.04中Realsense的安装与使用

韩绫纱

已于 2024-05-20 14:11:52 修改

阅读量3.6k

点赞数 30

CC 4.0 BY-SA版权

分类专栏： ubuntu 文章标签： ubuntu

于 2024-05-16 17:21:17 首次发布

本文链接：https://blog.csdn.net/lalawinter/article/details/138968455

ubuntu 专栏收录该内容

1 篇文章

订阅专栏

一. 安装realsense SDK

(注意：安装时需要拔掉相机)

由于T265停产，Intel RealSense SDK 2.0（v.2.54.1）在该版本中移除了对T265相机的支持，因此下载v2.48.0版本。

首先下载安装包：

git clone -b v2.48.0 https://github.com/IntelRealSense/librealsense

分别执行安装依赖项：

cd librealsense
sudo apt-get install libudev-dev pkg-config libgtk-3-dev
sudo apt-get install libusb-1.0-0-dev pkg-config
sudo apt-get install libglfw3-dev
sudo apt-get install libssl-dev

安装权限脚本：

sudo cp config/99-realsense-libusb.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules && udevadm trigger

编译librealsense:

mkdir build
cd build
cmake ../ -DCMAKE_BUILD_TYPE=Release -DBUILD_EXAMPLES=true
sudo make uninstall
make clean && make -j8
sudo make install

将t265插到USB3.0插口，测试安装好的librealsense

realsense-viewer

此时会打开realsense软件，把界面左边的off按钮拨到on, 即可出现相机的轨迹。

如果显示mission一个模块，右上角会有标注，输入如下指令安装该模块：

sudo cp ~/.99-realsense-libusb.rules /etc/udev/rules.d/99-realsense-libusb.rules && sudo udevadm control --reload-rules && udevadm trigger

再次打开realsense-viewer就可以看到t265的数据了~

三. 报错解决

（1）Error booting T265

把usb2.0口换为usb3.0口

（2）打开realsense-viewer后右上角有红色提醒

Description: Multiple realsense udev-rules were found!
1: /etc/udev/rules.d/99-realsense-libusb.rules
2:/lib/udev/rules.d/60-librealsense2-udev-rules.rules
Make sure to remove redundancies!

解决方法：

sudo rm -rf /etc/udev/rules.d/99-realsense-libusb.rules
sudo apt-get autoremove librealsense2-dkms

（3）无法获得锁/var/lib/dkpg/lock-frontend. 锁正由进程12836（unattended-upgr）持有。

解决方法：

sudo rm /var/cache/apt/archives/lock
sudo rm /var/lib/dpkg/lock

四. 使用ROS获取数据

方式一：

首先安装ros-noetic-realsense2-camera

sudo apt-get install ros-noetic-realsense2-camera

执行rs_t265.launch文件

roslaunch realsense2_camera rs_t265.launch

打开一个新的终端，查看发布的ros话题，可以看到realsense-camera和odom之类的数据

rostopic list

方式二：

源码位置：GitHub - IntelRealSense/realsense-ros at ros1-legacy

Create a catkin workspace Ubuntu

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws/src/

Clone the latest Intel® RealSense™ ROS from here into 'catkin_ws/src/'

git clone https://github.com/IntelRealSense/realsense-ros.git
cd realsense-ros/
git checkout `git tag | sort -V | grep -P "^2.\d+\.\d+" | tail -1`
cd ..

Make sure all dependent packages are installed. You can check .travis.yml file for reference.
Specifically, make sure that the ros package ddynamic_reconfigure is installed. If ddynamic_reconfigure cannot be installed using APT or if you are using Windows you may clone it into your workspace 'catkin_ws/src/' from here

catkin_init_workspace
cd ..
catkin_make clean
catkin_make -DCATKIN_ENABLE_TESTING=False -DCMAKE_BUILD_TYPE=Release
catkin_make install

echo "source ~/catkin_ws/devel/setup.bash" >> ~/.bashrc
source ~/.bashrc