hcia第五天作业

最新推荐文章于 2025-08-18 22:01:01 发布

m0_74812084

最新推荐文章于 2025-08-18 22:01:01 发布

阅读量198

点赞数

CC 4.0 BY-SA版权

文章标签：网络

本文链接：https://blog.csdn.net/m0_74812084/article/details/127984870

本文记录了路由器上OSPF协议的配置过程及邻居状态的变化情况，包括配置错误提示与邻居状态从初始化到完全建立的详细日志。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

[r1-ospf-1-area-0.0.0.1]quit
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]undo network  12.0.0.0  0.0.0.255
[r1-ospf-1-area-0.0.0.0]
[r1-ospf-1-area-0.0.0.0]undo network 192.168.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]
[r1-ospf-1-area-0.0.0.0]undonetwork 192.168.2.1 0.0.0.0
                        ^
Error: Unrecognized command found at '^' position.
[r1-ospf-1-area-0.0.0.0]
[r1-ospf-1-area-0.0.0.0]undo network 192.168.2.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]quit
[r1-ospf-1]ar	
[r1-ospf-1]are	
[r1-ospf-1]area  1
[r1-ospf-1-area-0.0.0.1]network  12.0.0.0  0.0.0.255
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:32-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r1-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:32-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r1-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:32-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r1-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:32-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r1-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:32-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r1-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:32-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r1-ospf-1-area-0.0.0.1]network  12.0.0.0  0.0.0.255
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]undo network 192.168.1.1 0.0.0.0
Error: The specified network command does not exist.
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]undo network 192.168.1.1 0.0.0.0
Error: The specified network command does not exist.
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]network 192.168.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]network 192.168.2.1 0.0.0.0
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]quit
[r1-ospf-1]quit
[r1]quit
<r1>res	
<r1>reset ospf p	
<r1>reset ospf process 
Warning: The OSPF process will be reset. Continue? [Y/N]:y
Nov 22 2022 15:32:30-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[16]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=2.2.2.2, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down) 
<r1>
<r1>
Nov 22 2022 15:32:30-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[17]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbo
rAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate r
eason=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=OSPF Process R
eset, NeighborChangeTime=2022-11-22 15:32:30-08:00) 
<r1>
Nov 22 2022 15:32:33-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
<r1>
Nov 22 2022 15:32:33-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
<r1>
Nov 22 2022 15:32:33-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
<r1>
Nov 22 2022 15:32:33-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
<r1>
Nov 22 2022 15:32:33-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
<r1>
Nov 22 2022 15:32:33-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
<r1>
Nov 22 2022 15:48:00-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[24]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbo
rAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate r
eason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhel
lo Received, NeighborChangeTime=2022-11-22 15:48:00-08:00) 
<r1>
Nov 22 2022 15:48:00-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init) 
<r1>
Nov 22 2022 15:48:04-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
<r1>
Nov 22 2022 15:48:04-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
<r1>
Nov 22 2022 15:48:04-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
<r1>
Nov 22 2022 15:48:04-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[29]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.12, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
<r1>ping 123.0.0.1
  PING 123.0.0.1: 56  data bytes, press CTRL_C to break
    Reply from 123.0.0.1: bytes=56 Sequence=1 ttl=254 time=30 ms
    Reply from 123.0.0.1: bytes=56 Sequence=2 ttl=254 time=30 ms
    Reply from 123.0.0.1: bytes=56 Sequence=3 ttl=254 time=20 ms
    Reply from 123.0.0.1: bytes=56 Sequence=4 ttl=254 time=30 ms
    Reply from 123.0.0.1: bytes=56 Sequence=5 ttl=254 time=30 ms

  --- 123.0.0.1 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/28/30 ms

<r1>ping 56.0.0.1
  PING 56.0.0.1: 56  data bytes, press CTRL_C to break
    Reply from 56.0.0.1: bytes=56 Sequence=1 ttl=253 time=80 ms
    Reply from 56.0.0.1: bytes=56 Sequence=2 ttl=253 time=60 ms
    Reply from 56.0.0.1: bytes=56 Sequence=3 ttl=253 time=70 ms
    Reply from 56.0.0.1: bytes=56 Sequence=4 ttl=253 time=40 ms
    Reply from 56.0.0.1: bytes=56 Sequence=5 ttl=253 time=60 ms

  --- 56.0.0.1 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 40/62/80 ms

<r1>ping 6.6.6.6
  PING 6.6.6.6: 56  data bytes, press CTRL_C to break
    Reply from 6.6.6.6: bytes=56 Sequence=1 ttl=253 time=60 ms
    Reply from 6.6.6.6: bytes=56 Sequence=2 ttl=253 time=60 ms
    Reply from 6.6.6.6: bytes=56 Sequence=3 ttl=253 time=70 ms
    Reply from 6.6.6.6: bytes=56 Sequence=4 ttl=253 time=50 ms
    Reply from 6.6.6.6: bytes=56 Sequence=5 ttl=253 time=50 ms

  --- 6.6.6.6 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 50/58/70 ms

<r1>ping 45.0.0.1
  PING 45.0.0.1: 56  data bytes, press CTRL_C to break
    Reply from 45.0.0.1: bytes=56 Sequence=1 ttl=253 time=60 ms
    Reply from 45.0.0.1: bytes=56 Sequence=2 ttl=253 time=70 ms
    Reply from 45.0.0.1: bytes=56 Sequence=3 ttl=253 time=70 ms
    Reply from 45.0.0.1: bytes=56 Sequence=4 ttl=253 time=60 ms
    Reply from 45.0.0.1: bytes=56 Sequence=5 ttl=253 time=50 ms

  --- 45.0.0.1 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 50/62/70 ms

<r1>ping 5.5.5.5
  PING 5.5.5.5: 56  data bytes, press CTRL_C to break
    Reply from 5.5.5.5: bytes=56 Sequence=1 ttl=253 time=60 ms
    Reply from 5.5.5.5: bytes=56 Sequence=2 ttl=253 time=60 ms
    Reply from 5.5.5.5: bytes=56 Sequence=3 ttl=253 time=50 ms
    Reply from 5.5.5.5: bytes=56 Sequence=4 ttl=253 time=50 ms
    Reply from 5.5.5.5: bytes=56 Sequence=5 ttl=253 time=50 ms

  --- 5.5.5.5 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 50/54/60 ms

<r1>
Nov 22 2022 16:07:45-08:00 r1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[30]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/0, Nexthop=12.0.0.2, Neighbour=0.0.0.0, Preference=2516582400, Label=NU
LL, Metric=16777216) 
<r1>

PC>ipconfig

Link local IPv6 address...........: fe80::5689:98ff:fee8:6d99
IPv6 address......................: :: / 128
IPv6 gateway......................: ::
IPv4 address......................: 192.168.1.254
Subnet mask.......................: 255.255.255.0
Gateway...........................: 192.168.1.1
Physical address..................: 54-89-98-E8-6D-99
DNS server........................:

PC>ping6.6.6.6
Invalid command!

PC>ping 6.6.6.6

Ping 6.6.6.6: 32 data bytes, Press Ctrl_C to break
From 6.6.6.6: bytes=32 seq=1 ttl=252 time=78 ms
From 6.6.6.6: bytes=32 seq=2 ttl=252 time=78 ms
From 6.6.6.6: bytes=32 seq=3 ttl=252 time=62 ms
From 6.6.6.6: bytes=32 seq=4 ttl=252 time=94 ms
From 6.6.6.6: bytes=32 seq=5 ttl=252 time=62 ms

--- 6.6.6.6 ping statistics ---
  5 packet(s) transmitted
  5 packet(s) received
  0.00% packet loss
  round-trip min/avg/max = 62/74/94 ms

PC>ping 5.5.5.5

Ping 5.5.5.5: 32 data bytes, Press Ctrl_C to break
From 5.5.5.5: bytes=32 seq=1 ttl=252 time=78 ms
From 5.5.5.5: bytes=32 seq=2 ttl=252 time=63 ms
From 5.5.5.5: bytes=32 seq=3 ttl=252 time=78 ms
From 5.5.5.5: bytes=32 seq=4 ttl=252 time=78 ms
From 5.5.5.5: bytes=32 seq=5 ttl=252 time=78 ms

--- 5.5.5.5 ping statistics ---
  5 packet(s) transmitted
  5 packet(s) received
  0.00% packet loss
  round-trip min/avg/max = 63/75/78 ms

PC>ping  4.4.4.4

Ping 4.4.4.4: 32 data bytes, Press Ctrl_C to break
From 4.4.4.4: bytes=32 seq=1 ttl=252 time=63 ms
From 4.4.4.4: bytes=32 seq=2 ttl=252 time=63 ms
From 4.4.4.4: bytes=32 seq=3 ttl=252 time=78 ms
From 4.4.4.4: bytes=32 seq=4 ttl=252 time=78 ms
From 4.4.4.4: bytes=32 seq=5 ttl=252 time=78 ms

--- 4.4.4.4 ping statistics ---
  5 packet(s) transmitted
  5 packet(s) received
  0.00% packet loss
  round-trip min/avg/max = 63/72/78 ms

PC>

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn	
[Huawei]sysname r2
[r2]user-i	
[r2]user-interface c0
[r2-ui-console0]id	
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]qui	
[r2-ui-console0]quit 
[r2]int	
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip ad	
[r2-GigabitEthernet0/0/0]ip address 12.0.0.2 24
Nov 22 2022 14:32:49-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip ad
                               ^
Error:Incomplete command found at '^' position.
[r2-GigabitEthernet0/0/1]ip ad	
[r2-GigabitEthernet0/0/1]ip address 23.0.0.1 24
Nov 22 2022 14:33:24-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]
<r2>dis	
<r2>display ip int b	
<r2>display ip int brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              12.0.0.2/24          up         up        
GigabitEthernet0/0/1              23.0.0.1/24          up         up        
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]ospf 1 r	
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]ar	
[r2-ospf-1]area1
           ^
Error: Unrecognized command found at '^' position.
[r2-ospf-1]area 1
[r2-ospf-1-area-0.0.0.1]net	
[r2-ospf-1-area-0.0.0.1]network 
                                ^
Error:Incomplete command found at '^' position.
[r2-ospf-1-area-0.0.0.1]network12.0.0.2 0.0.0.0
                        ^
Error: Unrecognized command found at '^' position.
[r2-ospf-1-area-0.0.0.1]network 12.0.0.2 0.0.0.0
[r2-ospf-1-area-0.0.0.1]disp	
[r2-ospf-1-area-0.0.0.1]display  o	
[r2-ospf-1-area-0.0.0.1]display  os	
[r2-ospf-1-area-0.0.0.1]display  ospf pe	
[r2-ospf-1-area-0.0.0.1]display  ospf peer  b	
[r2-ospf-1-area-0.0.0.1]display  ospf peer  brief 

	 OSPF Process 1 with Router ID 2.2.2.2
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 ----------------------------------------------------------------------------
[r2-ospf-1-area-0.0.0.1]display ospf peer brief

	 OSPF Process 1 with Router ID 2.2.2.2
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 ----------------------------------------------------------------------------
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:30-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, NeighborE
vent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, NeighborE
vent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchan
ge) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, NeighborE
vent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:30:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, NeighborE
vent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:32:31-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[7]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate re
ason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhell
o Received, NeighborChangeTime=2022-11-22 15:32:31-08:00) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:32:31-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, NeighborE
vent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:32:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:32:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:32:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:32:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r2-ospf-1-area-0.0.0.1]display ospf peer brief

	 OSPF Process 1 with Router ID 2.2.2.2
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.1          GigabitEthernet0/0/0             1.1.1.1          Full        
 ----------------------------------------------------------------------------
[r2-ospf-1-area-0.0.0.1]quit
[r2-ospf-1]quit
[r2]re	
[r2]res	
[r2]reset os	
[r2]qu	
[r2]quit 
<r2>re	
<r2>res	
<r2>reset os	
<r2>reset ospf p	
<r2>reset ospf process 
Warning: The OSPF process will be reset. Continue? [Y/N]:y
Nov 22 2022 15:48:01-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[13]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=1.1.1.1, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down) 
<r2>
<r2>
Nov 22 2022 15:48:01-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[14]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbo
rAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate r
eason=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=OSPF Process R
eset, NeighborChangeTime=2022-11-22 15:48:01-08:00) 
<r2>
Nov 22 2022 15:48:04-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
<r2>
Nov 22 2022 15:48:04-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
<r2>
Nov 22 2022 15:48:04-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
<r2>
Nov 22 2022 15:48:04-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
<r2>
Nov 22 2022 15:48:04-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
<r2>
Nov 22 2022 15:48:04-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.12, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
<r2>ospf 1 router-id 2.2.2.2
    ^
Error: Unrecognized command found at '^' position.
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]a	
[r2-ospf-1]area 1
[r2-ospf-1-area-0.0.0.1]net
                            ^
Error:Incomplete command found at '^' position.
[r2-ospf-1-area-0.0.0.1]net	
[r2-ospf-1-area-0.0.0.1]network 23.0.0.0 0.0.0.255
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:49:57-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.23, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:49:57-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.23, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:49:57-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.23, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:49:57-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.23, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:49:57-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.23, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r2-ospf-1-area-0.0.0.1]
Nov 22 2022 15:49:57-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.23, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r2-ospf-1-area-0.0.0.1]qu	
[r2-ospf-1-area-0.0.0.1]quit 
[r2-ospf-1]quit
[r2]quit
<r2>dis	
<r2>display  os	
<r2>display  ospf p	
<r2>display  ospf peer  b	
<r2>display  ospf peer  brief 

	 OSPF Process 1 with Router ID 2.2.2.2
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.1          GigabitEthernet0/0/0             1.1.1.1          Full        
 0.0.0.1          GigabitEthernet0/0/1             3.3.3.3          Full        
 ----------------------------------------------------------------------------
<r2>
Nov 22 2022 16:07:46-08:00 r2 %%01RM/4/IPV4_DEFT_RT_CHG(l)[27]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/1, Nexthop=23.0.0.2, Neighbour=0.0.0.0, Preference=2516582400, Label=NU
LL, Metric=16777216)

<Huawei>sys	
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn	
[Huawei]sysname  r3
[r3]user-i	
[r3]user-interface c0
[r3-ui-console0]id	
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]quit	
[r3-ui-console0]quit 
[r3]int	
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip ad	
[r3-GigabitEthernet0/0/0]ip address 23.0.0.2 24
[r3-GigabitEthernet0/0/0]
Nov 22 2022 14:34:14-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip ad	
[r3-GigabitEthernet0/0/1]ip address 123.0.0.1 24
Nov 22 2022 14:36:28-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]
<r3>display ip int brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              23.0.0.2/24          up         up        
GigabitEthernet0/0/1              123.0.0.1/24         up         up        
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
<r3>ospf 1ro	
<r3>ospf 1 r	
<r3>ospf 1 ro	
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]ospf 1 r	
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]netw	
[r3-ospf-1-area-0.0.0.1]network  23.0.0.0 0.0.0.255
[r3-ospf-1-area-0.0.0.1]qu	
[r3-ospf-1-area-0.0.0.1]quit 
[r3-ospf-1]ar	
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]netw	
[r3-ospf-1-area-0.0.0.0]network  123.0.0.0 0.0.0.255
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:37:42-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:37:50-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:37:50-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:37:50-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:37:50-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:25-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:50-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r3-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r3-ospf-1-area-0.0.0.0]qu	
[r3-ospf-1-area-0.0.0.0]quit 
[r3-ospf-1]quit
[r3]di	
[r3]dis	
[r3]display  os	
[r3]display  ospf p	
[r3]display  ospf peer  b	
[r3]display  ospf peer  brief 

	 OSPF Process 1 with Router ID 3.3.3.3
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/1             6.6.6.6          Full        
 0.0.0.0          GigabitEthernet0/0/1             5.5.5.5          Full        
 0.0.0.0          GigabitEthernet0/0/1             4.4.4.4          Full        
 ----------------------------------------------------------------------------
[r3]display ospf peer brief

	 OSPF Process 1 with Router ID 3.3.3.3
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/1             6.6.6.6          Full        
 0.0.0.0          GigabitEthernet0/0/1             5.5.5.5          Full        
 0.0.0.0          GigabitEthernet0/0/1             4.4.4.4          Full        
 ----------------------------------------------------------------------------
[r3]
Nov 22 2022 15:49:54-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.23, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r3]
Nov 22 2022 15:49:56-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.23, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r3]
Nov 22 2022 15:49:56-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.23, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r3]
Nov 22 2022 15:49:56-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.23, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r3]
Nov 22 2022 15:49:56-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.23, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r3]display ospf peer brief

	 OSPF Process 1 with Router ID 3.3.3.3
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/1             6.6.6.6          Full        
 0.0.0.0          GigabitEthernet0/0/1             5.5.5.5          Full        
 0.0.0.0          GigabitEthernet0/0/1             4.4.4.4          Full        
 0.0.0.1          GigabitEthernet0/0/0             2.2.2.2          Full        
 ----------------------------------------------------------------------------
[r3]
Nov 22 2022 16:05:57-08:00 r3 %%01OSPF/3/NBR_CHG_DOWN(l)[22]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=4.4.4.4, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r3]
Nov 22 2022 16:05:57-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[23]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=4.4.4.4, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Neighbor
ChangeTime=2022-11-22 16:05:57-08:00) 
[r3]
Nov 22 2022 16:07:45-08:00 r3 %%01RM/4/IPV4_DEFT_RT_CHG(l)[24]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/1, Nexthop=123.0.0.3, Neighbour=0.0.0.0, Preference=2516582400, Label=N
ULL, Metric=16777216)

<Huawei>sys 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn	
[Huawei]sysname 
                ^
Error:Incomplete command found at '^' position.
[Huawei]sysname r4
[r4]user-i	
[r4]user-interface c0
[r4-ui-console0]id	
[r4-ui-console0]idle-timeout  0 0
[r4-ui-console0]quit
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip ad	
[r4-GigabitEthernet0/0/0]ip address 123.0.0.4 24
[r4-GigabitEthernet0/0/0]
Nov 22 2022 14:39:06-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r4-GigabitEthernet0/0/0]int l0
[r4-LoopBack0]ip ad 4.4.4.4 24
[r4-LoopBack0]int g0/0/1
[r4-GigabitEthernet0/0/1]ip ad 45.0.0.1 24
Nov 22 2022 14:41:11-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r4-GigabitEthernet0/0/1]
<r4>display ip int brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              123.0.0.4/24         up         up        
GigabitEthernet0/0/1              45.0.0.1/24          up         up        
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         4.4.4.4/24           up         up(s)     
NULL0                             unassigned           up         up(s)     
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]ospf 1 r	
[r4]ospf 1 router-id  4.4.4.4
[r4-ospf-1]a	
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]netw	
[r4-ospf-1-area-0.0.0.0]network  123.0.0.0 0.0.0.255
[r4-ospf-1-area-0.0.0.0]q
Nov 22 2022 15:37:50-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r4-ospf-1-area-0.0.0.0]q
Nov 22 2022 15:37:50-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r4-ospf-1-area-0.0.0.0]q
Nov 22 2022 15:37:50-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r4-ospf-1-area-0.0.0.0]q
Nov 22 2022 15:37:50-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r4-ospf-1-area-0.0.0.0]qu
Nov 22 2022 15:37:50-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r4-ospf-1-area-0.0.0.0]qu
Nov 22 2022 15:37:50-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r4-ospf-1-area-0.0.0.0]quit
[r4-ospf-1]a	
[r4-ospf-1]area 2
[r4-ospf-1-area-0.0.0.2]netw	
[r4-ospf-1-area-0.0.0.2]network 4.4.4.4 0.0.0.255
[r4-ospf-1-area-0.0.0.2]quit
[r4-ospf-1]a	
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]netw	
[r4-ospf-1-area-0.0.0.0]network 45.0.0.0 0.0.0.255
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:25-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:26-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:26-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:26-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:26-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:13-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.45, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.45, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.45, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.45, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.45, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:50-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r4-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r4-ospf-1-area-0.0.0.0]dis	
[r4-ospf-1-area-0.0.0.0]display os	
[r4-ospf-1-area-0.0.0.0]display ospf p	
[r4-ospf-1-area-0.0.0.0]display ospf peer  b	
[r4-ospf-1-area-0.0.0.0]display ospf peer  brief 

	 OSPF Process 1 with Router ID 4.4.4.4
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/0             3.3.3.3          Full        
 0.0.0.0          GigabitEthernet0/0/0             6.6.6.6          Full        
 0.0.0.0          GigabitEthernet0/0/0             5.5.5.5          Full        
 0.0.0.0          GigabitEthernet0/0/1             5.5.5.5          Full        
 ----------------------------------------------------------------------------
[r4-ospf-1-area-0.0.0.0]quit
[r4-ospf-1]ar	
[r4-ospf-1]arp	
[r4-ospf-1]arp-ping 
[r4-ospf-1]asbr-	
[r4-ospf-1]asbr-summary 
                        ^
Error:Incomplete command found at '^' position.
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]de	
[r4-ospf-1-area-0.0.0.0]desc	
[r4-ospf-1-area-0.0.0.0]description quit
[r4-ospf-1-area-0.0.0.0]quit
[r4-ospf-1]def	
[r4-ospf-1]default-	
[r4-ospf-1]default-route-advertise  a	
[r4-ospf-1]default-route-advertise  always 
[r4-ospf-1]int g0/0/0
[r4-GigabitEthernet0/0/0]ospf p	
[r4-GigabitEthernet0/0/0]ospf a	
[r4-GigabitEthernet0/0/0]ospf authentication-mode 123
                                                  ^
Error: Unrecognized command found at '^' position.
[r4-GigabitEthernet0/0/0]ospf authentication-mode si	
[r4-GigabitEthernet0/0/0]ospf authentication-mode simple  123
[r4-GigabitEthernet0/0/0]ospf authentication-mode simple c	
[r4-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r4-GigabitEthernet0/0/0]
Nov 22 2022 16:05:55-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[23]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=5.5.5.5, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r4-GigabitEthernet0/0/0]
Nov 22 2022 16:05:55-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[24]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=5.5.5.5, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Neighbor
ChangeTime=2022-11-22 16:05:55-08:00) 
[r4-GigabitEthernet0/0/0]
Nov 22 2022 16:05:59-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[25]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=6.6.6.6, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r4-GigabitEthernet0/0/0]
Nov 22 2022 16:05:59-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[26]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=6.6.6.6, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Neighbor
ChangeTime=2022-11-22 16:05:59-08:00) 
[r4-GigabitEthernet0/0/0]
Nov 22 2022 16:06:03-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[27]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=3.3.3.3, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r4-GigabitEthernet0/0/0]
Nov 22 2022 16:06:03-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[28]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=3.3.3.3, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Neighbor
ChangeTime=2022-11-22 16:06:03-08:00) 
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]os	
[r4-GigabitEthernet0/0/1]ospft	
[r4-GigabitEthernet0/0/1]ospf ti	
[r4-GigabitEthernet0/0/1]ospf timer  he	
[r4-GigabitEthernet0/0/1]ospf timer  hello  5
[r4-GigabitEthernet0/0/1]
Nov 22 2022 16:07:29-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[29]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=5.5.5.5, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r4-GigabitEthernet0/0/1]
Nov 22 2022 16:07:29-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[30]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=5.5.5.5, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parameter Mism
atch, NeighborChangeTime=2022-11-22 16:07:29-08:00) 
[r4-GigabitEthernet0/0/1]

<r5>sys
Enter system view, return user view with Ctrl+Z.
[r5]ospf 1 r	
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]are	
[r5-ospf-1]area  0
[r5-ospf-1-area-0.0.0.0]netw	
[r5-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:27-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:27-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:27-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:27-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:27-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:27-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:40:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r5-ospf-1-area-0.0.0.0]netw	
[r5-ospf-1-area-0.0.0.0]network  56.0.0.0 0.0.0.255
[r5-ospf-1-area-0.0.0.0]netw	
[r5-ospf-1-area-0.0.0.0]network  45.0.0.0 0.0.0.255 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.45, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.45, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.45, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.45, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.45, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:41:18-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.45, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:50-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:00-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:00-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:24-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.56, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:33-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.56, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:33-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.56, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:33-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.56, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r5-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:33-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.56, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r5-ospf-1-area-0.0.0.0]quit
[r5-ospf-1]a	
[r5-ospf-1]area 2
[r5-ospf-1-area-0.0.0.2]netw	
[r5-ospf-1-area-0.0.0.2]network  5.5.5.5 0.0.0.255
[r5-ospf-1-area-0.0.0.2]dis	
[r5-ospf-1-area-0.0.0.2]display  os	
[r5-ospf-1-area-0.0.0.2]display  ospf p	
[r5-ospf-1-area-0.0.0.2]display  ospf peer  b	
[r5-ospf-1-area-0.0.0.2]display  ospf peer  brief 

	 OSPF Process 1 with Router ID 5.5.5.5
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/0             3.3.3.3          Full        
 0.0.0.0          GigabitEthernet0/0/0             6.6.6.6          2-Way       
 0.0.0.0          GigabitEthernet0/0/0             4.4.4.4          Full        
 0.0.0.0          GigabitEthernet0/0/1             4.4.4.4          Full        
 0.0.0.0          GigabitEthernet0/0/2             6.6.6.6          Full        
 ----------------------------------------------------------------------------
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:05:58-08:00 r5 %%01RM/4/IPV4_DEFT_RT_CHG(l)[29]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/0, Nexthop=123.0.0.4, Neighbour=0.0.0.0, Preference=2516582400, Label=N
ULL, Metric=16777216) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:03-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[30]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:03-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[31]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=4.4.4.4, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:03-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[32]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=4.4.4.4, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Neighbor
ChangeTime=2022-11-22 16:06:03-08:00) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:07-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[33]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:07-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[34]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:07-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[35]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:07:45-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[36]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=4.4.4.4, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:07:45-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[37]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=4.4.4.4, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parameter Mism
atch, NeighborChangeTime=2022-11-22 16:07:45-08:00) 
[r5-ospf-1-area-0.0.0.2]
Nov 22 2022 16:07:45-08:00 r5 %%01RM/4/IPV4_DEFT_RT_CHG(l)[38]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/1, Nexthop=45.0.0.1, Neighbour=0.0.0.0, Preference=2516582400, Label=NU
LL, Metric=16777216) 
[r5-ospf-1-area-0.0.0.2]

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn	
[Huawei]sysname r6
[r6]user-i	
[r6]user-interface c0
[r6-ui-console0]id	
[r6-ui-console0]idle-timeout  0 0
[r6-ui-console0]quit
[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip ad	
[r6-GigabitEthernet0/0/0]ip address 123.0.0.2 24
Nov 22 2022 14:37:41-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r6-GigabitEthernet0/0/0]int l0
[r6-LoopBack0] ip ad	
[r6-LoopBack0]ip address  6.6.6.6 24
[r6-LoopBack0]int g0/0/1
[r6-GigabitEthernet0/0/1]ip ad	
[r6-GigabitEthernet0/0/1]ip address  56.0.0.2 24
Nov 22 2022 14:45:24-08:00 r6 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r6-GigabitEthernet0/0/1]
<r6>display ip int brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              123.0.0.2/24         up         up        
GigabitEthernet0/0/1              56.0.0.2/24          up         up        
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         6.6.6.6/24           up         up(s)     
NULL0                             unassigned           up         up(s)     
<r6>
<r6>
<r6>sys
Enter system view, return user view with Ctrl+Z.
[r6]os	
[r6]ospf 1 r	
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]a	
[r6-ospf-1]area 0
[r6-ospf-1-area-0.0.0.0]netw	
[r6-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:53-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r6-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
Nov 22 2022 15:42:53-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r6-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
Nov 22 2022 15:42:53-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way) 
[r6-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
Nov 22 2022 15:42:53-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r6-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
Nov 22 2022 15:42:53-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r6-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
Nov 22 2022 15:42:53-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r6-ospf-1-area-0.0.0.0]network 123.0.0.0 0.0.0.255
Nov 22 2022 15:42:53-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:42:58-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r6-ospf-1-area-0.0.0.0]netw	
[r6-ospf-1-area-0.0.0.0]network 56.0.0.0 0.0.0.255
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:32-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.56, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:32-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.56, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:32-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.56, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.56, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.56, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
) 
[r6-ospf-1-area-0.0.0.0]
Nov 22 2022 15:43:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.0.56, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r6-ospf-1-area-0.0.0.0]qu	
[r6-ospf-1-area-0.0.0.0]quit 
[r6-ospf-1]a	
[r6-ospf-1]area 2
[r6-ospf-1-area-0.0.0.2]netw	
[r6-ospf-1-area-0.0.0.2]network 5.5.5.5 0.0.0.255
[r6-ospf-1-area-0.0.0.2]undo network 5.5.5.5 0.0.0.255
[r6-ospf-1-area-0.0.0.2]
[r6-ospf-1-area-0.0.0.2]network 6.6.6.6 0.0.0.255
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:05:57-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:05:57-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[25]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=4.4.4.4, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:05:57-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[26]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=4.4.4.4, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Neighbor
ChangeTime=2022-11-22 16:05:57-08:00) 
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:06-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:06:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[29]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.0.0.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:07:45-08:00 r6 %%01RM/4/IPV4_DEFT_RT_CHG(l)[30]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/1, Nexthop=56.0.0.1, Neighbour=0.0.0.0, Preference=2516582400, Label=NU
LL, Metric=16777216) 
[r6-ospf-1-area-0.0.0.2]
Nov 22 2022 16:07:45-08:00 r6 %%01RM/4/IPV4_DEFT_RT_CHG(l)[31]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/0, Nexthop=123.0.0.3, Neighbour=0.0.0.0, Preference=2516582400, Label=N
ULL, Metric=16777216) 
[r6-ospf-1-area-0.0.0.2]