在腾讯云安装docker及zookeeper和dubbo

原创已于 2022-12-15 14:51:09 修改 · 920 阅读

4 ·

CC 4.0 BY-SA版权

文章标签：

#腾讯云 #docker #zookeeper

于 2022-08-15 17:32:02 首次发布

腾讯云专栏收录该内容

3 篇文章

订阅专栏

本文详细介绍了在CentOS系统上安装Docker，设置阿里云镜像加速，配置并启动Zookeeper，以及部署Dubbo-admin的过程，包括版本检查、系统优化、镜像拉取与挂载，适合实验和开发环境。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

开放端口，如果是做实验，就先在云安全策略组，全部开发吧。也可以有选择的开放对应的端口，用什么就开放什么。

1．查看当前centos版本

yum install -y redhat-lsb

lsb_release –a

2．按照docker要求系统为64位，系统内核版本为3.10以上

uname –r

查看是否已安装docker列表

yum list installed | grep docker

3．安装docker:
yum -y install docker

4．启动docker:
systemctl start docker
5．查看服务是否启动：
systemctl status docker
6．阿里云镜像加速

sudo mkdir -p /etc/docker
sudo tee /etc/docker/daemon.json <<-'EOF'
{
  "registry-mirrors": ["https://01sy6s7g.mirror.aliyuncs.com"]
}
EOF
sudo systemctl daemon-reload
sudo systemctl restart docker

systemctl status docker

7.设置开机自动启动命令：
systemctl enable docker.service

安装dubbo-admin

docker search dubbo-admin
docker pull chenchuxin/dubbo-admin

安装zookeeper
docker search zookeeper \
docker pull zookeeper:latest
第一步：创建ZooKeeper 挂载目录（数据挂载目录、配置挂载目录和日志挂载目录）

mkdir -p /usr/local/zookeeper/data # 数据挂载目录 
mkdir -p /usr/local/zookeeper/conf # 配置挂载目录 
mkdir -p /usr/local/zookeeper/logs # 日志挂载目录

第二步：添加ZooKeeper配置文件，在挂载配置文件目录(/usr/local/zookeeper/conf)下，新增 zoo.cfg 配置文件，配置内容如下：

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/data
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMet
ricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true

第三步启动zookeeper:

docker run -d 
--name zookeeper 
--privileged=true 
-p 2181:2181 
--restart=always 
-v /usr/local/zookeeper/data:/data 
-v /usr/local/zookeeper/conf:/conf 
-v /usr/local/zookeeper/logs:/datalog 
zookeeper

查看zookeeper容器地地址
docker inspect zookeeper

启动dubbo-admin：

docker run -d  --name dubbo-admin  -v /home/dubbo/dubbo-admin:/data  -p 8180:8080  -e DUBBO_REGISTRY="zookeeper://172.17.0.2:2181"  -e DUBBO_ROOT_PASSWORD=root  -e DUBBO_GUEST_PASSWORD=guest  --restart=always  chenchuxin/dubbo-admin

# 注意 -e DUBBO_REGISTRY=zookeeper://ip:port 填写自己的zookeeper ip和端口号
# -e DUBBO_ROOT_PASSWORD 配置控制台root账号密码
# -e DUBBO_GUEST_PASSWORD 配置控制台guest账号密码
#-v 是宿主机与容器的挂载目录 #-p 是访问的端口号

运行：用户名 root/root或guest/guest