AC+AP 旁挂式连接配置（华为）

最新推荐文章于 2025-05-29 17:54:17 发布

Ryan.Mo

最新推荐文章于 2025-05-29 17:54:17 发布

阅读量2.4k

点赞数

CC 4.0 BY-SA版权

文章标签：网络智能路由器

本文链接：https://blog.csdn.net/qq_24037197/article/details/131749495

该文描述了AR1路由器、LSW1和LSW2核心及二层交换机的配置，包括IP地址分配、VLAN划分、DHCP服务启用以及AC对AP的管理，如SSID设置、安全策略和无线监管域配置。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

AR1路由器配置
#
interface GigabitEthernet0/0/0
ip address 10.1.30.1 255.255.255.0
ip route-static 10.1.20.0 255.255.255.0 10.1.30.2
#

LSW1核心交换机
#
dhcp enable
vlan batch 10 20 30
interface Vlanif20
ip address 10.1.20.1 255.255.255.0
dhcp select interface
interface Vlanif30
ip address 10.1.30.2 255.255.255.0
interface GigabitEthernet0/0/1
port link-type access
port default vlan 30
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 10 20
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 10
#

LSW2二层交换机配置
#
vlan batch 10 20
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10 20
interface GigabitEthernet0/0/2
port link-type trunk
port trunk pvid vlan 10
port trunk allow-pass vlan 10 20
interface GigabitEthernet0/0/3
port link-type trunk
port trunk pvid vlan 10
port trunk allow-pass vlan 10 20
#

AC配置
#
vlan batch 10
dhcp enable
interface Vlanif10
ip address 10.1.10.1 255.255.255.0
dhcp select interface
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
capwap source ip-address 10.1.10.1
#
wlan
ap-group name group1
ap auth-mode no-auth
display ap all
#等待几十秒，待ap上线再操作一下命令
ap-id 0
ap-name ap1
ap-group group1
ap-id 1
ap-name ap2
ap-group group1
ap auth-mode mac-auth
display ap all
ssid-profile name group1
ssid group1
security-profile name group1
security wpa-wpa2 psk pass-phrase 12345678 aes
vap-profile name group1
ssid-profile group1
security-profile group1
forward-mode direct-forward
regulatory-domain-profile name group1
country-code CN
ap-group name group1
regulatory-domain-profile group1
vap-profile group1 wlan 1 radio all
#