field to load resource，the responsed with a status of 404

• A PTM Responder must issue PTM ResponseD when it has stored copies of the values required to populate the PTM ResponseD Message: historical timestamps (t3 - t2) and the PTM Master Time at the receipt of the most recent PTM Request Message (time t2’). • A PTM Responder is permitted to issue PTM Response when it has stored copies of the historical timestamps (t3 - t2) but must request the PTM Master Time from elsewhere. In this case, it is permitted to issue PTM Response messages in response to PTM Request Messages while it retrieves the PTM Master Time if that retrieval is expected to take more than 10 μs. • The perceived granularity of the historical timestamps and PTM Master Time values transmitted by a PTM Responder must not exceed that reported in the Local Clock Granularity field of the PTM Capability register. 翻译

• PTM Responders must populate PTM ResponseD Messages as follows (refer to Figure 6-24 and the accompanying implementation note): ◦ The PTM Master Time field is a 64-bit value containing the value of PTM Master Time at the receipt of the PTM Request Message for the current PTM Dialog. In Figure 6-24 , for the 2nd PTM dialog, this is the PTM Master Time at time t2’. ◦ The Propagation Delay field is a 32-bit value containing the interval between the receipt of the PTM Request Message and the transmission of the PTM Response Message for the previous PTM dialog. In Figure 6-24 , for the 2nd PTM dialog, this is the time interval between t2 and t3 captured during the 1st PTM dialog. ◦ The unit of measurement for both fields is one ns. ◦ A PTM Responder with multiple Downstream Ports must populate all PTM ResponseD Messages with values from a single PTM Root across all its PTM Ports Downstream ports. 翻译

• Switch Downstream Ports and Root Ports acting as PTM Responders must respond to each PTM Request Message received at their Downstream Ports with either PTM Response or PTM ResponseD according to the following rules: ◦ A PTM Responder must not send a PTM Response or PTM ResponseD Message without first receiving a PTM Request Message. ◦ Upon receipt of a PTM Request Message, a PTM Responder must attempt to issue a PTM Response or PTM ResponseD Message within 10 μs. ◦ A PTM Responder must issue PTM Response when the Downstream Port does not have valid historical timestamps (t3 - t2) with which to fulfill a PTM Request Message. 翻译

• A Switch is permitted to maintain a local PTM context for use in fulfilling PTM Requests received on its Downstream Ports. • A Switch which is not acting as a PTM Root must invalidate its local context no more than 10 ms from the last PTM dialog on its Upstream Port. The Switch must then refresh its local PTM context prior to issuing further PTM ResponseD Messages on its Downstream Ports. This requirement for periodic refreshes is optional if it is guaranteed by implementation-specific means that the Switch’s local clock is phase locked with PTM Master Time. • Any Switch implementing a local clock for the purpose of maintaining a local PTM context must report the granularity of this clock as defined in the PTM Capabilities structure (Section 7.9.16 ). 翻译