【CentOS7.6】yum 报错：Could not retrieve mirrorlist http://mirrorlist.centos.org

2024.10.22 更新：不知道是否出现了阿里云不再支持 centos 镜像的问题，评论区有反馈。

如果大家还能使用下面的方法解决问题，请在评论区留言，谢谢。
如果大家还能使用下面的方法解决问题，请在评论区留言，谢谢。
如果不能的话请务必在评论区告诉我我来更新。谢谢各位
如果不能的话请务必在评论区告诉我我来更新。谢谢各位

一、报错

1.报错内容如下

在使用 yum makecache 命令时报错，在 yum install -y xxx 的时候报错等等

[root@hcss-ecs-a901 yum.repos.d]# yum makecache
Loaded plugins: fastestmirror
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org?arch=x86_64&release=7&repo=sclo-rh error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"


 One of the configured repositories failed (Unknown),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: centos-sclo-rh/x86_64

2.原因分析

我们的服务器没法访问外面的网络，所以我们需要配置镜像源

二、解决

1.进入目录

先进入目录 /etc/yum.repos.d

cd /etc/yum.repos.d

2.打开 xftp

3.备份文件

备份这三个文件就行了
（注意！！很多人只有 CentOS-Base.repo 文件，没有后两个，这也没问题，有几个备份几个，不用额外创建！）

4.编辑 CentOS-Base.repo 文件（必选）

！！！ 警告，在编辑文件的时候，你肯定是复制黏贴下面的内容的。但是，vim 编辑器会有个黏贴反应时间，所以大概率你在黏贴了内容之后，最开头的内容会缺少 1-5 个字符，你需要手动补全，下面的编辑也是一样 ！！！
编辑 CentOS-Base.repo 文件：

vi /etc/yum.repos.d/CentOS-Base.repo

替换内容为：

[base]
name=CentOS-$releasever - Base
baseurl=https://mirrors.aliyun.com/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

[updates]
name=CentOS-$releasever - Updates
baseurl=https://mirrors.aliyun.com/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

[extras]
name=CentOS-$releasever - Extras
baseurl=https://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

[centosplus]
name=CentOS-$releasever - Plus
baseurl=https://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

5.编辑 CentOS-SCLo-scl-rh.repo 文件（如果没有这个文件，不用管）

编辑 CentOS-SCLo-scl-rh.repo 文件：

vi /etc/yum.repos.d/CentOS-SCLo-scl-rh.repo

替换内容为：

[centos-sclo-rh]
name=CentOS-$releasever - SCLo rh
baseurl=https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/rh/
gpgcheck=1
enabled=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

6.编辑 CentOS-SCLo-scl.repo 文件（如果没有这个文件，不用管）

编辑 CentOS-SCLo-scl.repo 文件：

vi /etc/yum.repos.d/CentOS-SCLo-scl.repo

替换内容为：

[centos-sclo-sclo]
name=CentOS-$releasever - SCLo sclo
baseurl=https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/sclo/
gpgcheck=1
enabled=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

7.清理 yum 缓存

yum clean all

6.重新生成 yum 缓存

yum makecache

请注意！如果在你之后的 yum install 过程中发生了 GPGKEY 报错，请参考这篇博客：
请注意！如果在你之后的 yum install 过程中发生了 GPGKEY 报错，请参考这篇博客：
请注意！如果在你之后的 yum install 过程中发生了 GPGKEY 报错，请参考这篇博客：

https://blog.csdn.net/qq_43768851/article/details/140113001?spm=1001.2014.3001.5501

三、结果

1.再次 yum makecache 的结果如下

圆满成功