雅思英语作文计算机和历史,雅思的写作8分范文:计算机VS教师

本文探讨了随着计算机在教育中的普及,是否削弱了教师的重要作用。作者强调教师在道德引导、个性化关怀及无法替代的人际交流方面的价值,指出计算机虽有强大功能,但无法替代教师在教育中的独特贡献。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

雅思的写作8分范文:计算机VS教师

The computer are widely used in education and some people think teacher are not play important role in the classroom . to what extend do you agree?

0a47f182898663cf5bbfa3f443065095.png

nowadays, the computer is rapidly growing in its popularity in education for its marvelous functions. however, the problem has become one of whether teachers or computers enjoy a vital role in education, which has aroused wide concern in public. yet i am, and probably always will be amazed when i hear people saying that teachers are no longer important in education with the advent of computers. deep down, i guess this might be a plausible hypothesis were it not for the following points.

on a substantive level, it is often the case that teachers can benefit students in many ways that computers cannot. indeed teachers often bring students a host of knowledge and ideas out of text books, such as ethics, issues in human behavior and such kind of things. even if there were no hard evidence to support the point that teachers are usually serving as the guide for students, a role which can never be performed by computers, there are plenty of vivid examples that support it. when i was studying in the high school, one of my teachers helped me with my study and taught me how to deal with difficulties in my life as well. so these benefits are impossible to be gained from computers.

【雅思的写作8分范文:计算机VS教师】相关文章:

资源下载链接为: https://pan.quark.cn/s/d9ef5828b597 电流互感模块主要用于测量交流电路中的电流,并将其转换为与原电流成一定比例的低电压信号,便于远距离监测与控制。它常用于电力系统电流检测,尤其适合需要安全隔离的场景。本说明书重点介绍了电流互感模块电压互感器模块的技术参数、使用方法及注意事项。 电流互感模块采用ZMCT103B/C型号电流互感器,具有体积小、精度高、一致性好的特点,对电力测量保护的准确性可靠性至关重要。其在高精度电力设备中应用,需具备高稳定性重复性,隔离耐压达3000V,可承受高工作电压,保障高压环境下正常运行。 电流互感模块技术参数包括:额定输入电流0~10A(100Ω),输出电流5mA,精确度0.2%,输出信号为交流电压,变化0.2级,线性范围1000:1,相位差≤20(100Ω负载),工作温度范围-40°C至+70°C。5A交流电流互感模块可测量5A以内交流电流,有对应模拟量输出。使用时,需将被测信号导线穿过互感器圆孔,输出信号接口为SG(G为信号地),输出为交流电压信号,满足测量监控需求。单相交流电流互感带OP模块除板载精密微型电流互感器外,还集成高精度运放电路,能精确采样适当补偿信号,适合测量5A以内交流电流,输出模拟量可调节。理想状态下,输入电压VCC为3-35V,调节电位器可改变放大倍数,但输出电压不超过1/2VCC,输出信号电压最大值也不超1/2VCC。 电压互感器模块型号为ZMPT101B,适用于电压功率精确测量。其板载精密微型电压互感器高精度运放电路,能精确采样并适当补偿信号。使用时,左侧接线柱可接入250V以内交流电压,右侧VCC工作电压为DC3-35V,通过电位器可调节放大比例,最大不超过1/2VCC。 使用互感模块时,需注意工作电压环境温度,这两者会影响互感器性能。电流互感模块
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值