计算机网络 什么是帧头部,帧头是什么意思

本文介绍了计算机网络中帧头的结构和作用,包括其包含的字段如用户标识、业务标识、偏移量等,并讨论了在不同通信系统如Fibre Channel、GPS和以太网中帧头的应用,以及其在数据帧捕获和错误检测中的重要性。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

1. 本发明公开了一种超3代(B3G)移动通信系统下的媒体接入控制层帧结构。包括9个字段,其顺序及每个字段的位数依次为:用户标识字段;业务标识字段,位数为3比特;分段标识字段,位数为3比特;标志字段,位数为1比特;偏移量字段,位数为6比特;长度字段,位数为8比特;保留字段,位数为3比特;帧头校验字段,位数根据采用的前向纠错编码算法而定;数据字段。

This invention discloses a frame structure of a MAC under a B3G mobile communication system including 9 fields, in which, the sequence and digit of each field is as follows: a UID field, a SID field in 3 bits, a SgID field with the digit of 3 bits, a F field: one bit, an offset field with the digit of 6 bits, a length field with the digit of 8 bits and a Rev field with the digit of 3 bits, a HEC field and the digit is decided according to the front correction code algorithm and a data field.

2. 帧头

2. 帧头包括接收方主机物理地址的定位以及其它网络信息。

The frame header contains the location of the physical address as well as other network data.

3. 在Fibre Channel中,如果数据帧或者报文中包含帧头或者报头以及填充字节等可选信息,那么这些信息不包括在有效负载之内。

In Fibre Channel, the payload excludes optional headers and fill bytes, if they are present.

4. 其GPS采用接收到字符即产生中断的方法,FIFO只起到缓冲作用,并在系统接收中断中,判断是否收到帧头。

Whose GPS adopt taking-over to be to produce interrupted method to the character, FIFO gets up only to buffer action, and in system taking-over be interrupted, judge receiving frame of head or not.

5. 该系统由遥测发射机、遥测接收机、笔记本计算机等三部分组成,工作在433MHz免申请的开放频段,能同时测试10名受试者的心音信号;遥测发射机由受试者随身携带,每次发射一个心动周期的心音信号,并以心电信号的R波同步脉冲作为数据包的帧头标记,这样作为系统主机的笔记本计算机只需采用简单算法就能快速而准确地从接收到的遥测心音信号中提取研究心肌变力性和变时性所需的心力数据和心率数据,而无需遥测心电信号;遥测接收机通过专用的USB接口转换模块,实现了与笔记本计算机的USB口之间的高速数据传输,同时又无需额外的工作电源。

Performance test shows that this telemetry system has reached the design requirement, and can be applied to study myocardial inotropism and chronotropism in mobile sites.

6. 在捕获阶段利用训练符号完成了数据帧头捕获,频偏粗估计,符号定时等任务,在跟踪阶段利用循环前缀,导频信号完成载波频率跟踪等任务。

In the acquire phase, it utilizes the training symbols to achieve packet header detection, frequency offset estimation and symbol timing. During the tracking phase, it makes use of the pilot signal and cycle prefix to fulfill the tasks of carrier frequency tracking.

7. 实现4路E1信号到1路二次群信号的复分接,主要包括全数字锁相环、HDB3-NRZ编解码、正码速调整、帧头检测和复分接等。

The author's main tasks includes: 1.Implement the multiplexer of 4 El signals, the main circuit includes all digital phase-locked loop (DPLL), HDB3 encode and decode, positive justification, the start of frame detect circuit, multiplex and demultiplex circuit.

8. 在AIS基带信号的处理过程中,还需要帧头检测、频偏估计、符号定时算法的辅助,在论文中,对各种算法也进行了详细的研究。

In the AIS baseband signal processing, we also need frame head detection, frequency shift estimation and symbol timing algorithm to assist our demodulation process. In this paper, we also conducted all the algorithms researched in detail.

9. 帧头

9. 以太帧头中有个16比特的帧类型区域控制此项。

To handle this there is a16-bit frame type field in the Ethernet header.

10. 简单数据链路协议(SDL)是一种新的且具有实现简单和低开销特点的数据链路协议,其同步方式采用了帧头循环冗余码(CRC)校验实现。

Simple data link (SDL) is a new data link protocol with simple processing and low overhead cost.

11. 本文针对全光路由控制的帧头复制、识别,以及光缓存技术进行了深入研究和探讨,取得的成果对于全光路由控制的实现和全光分组交换的发展有重要的参考价值。

This dissertation focuses on the header periodic replication, header recognition and payload optical buffer, and these conclusions achieved have important reference value for implementation of all-optical routing control and development of all-optical packet switching.

12. 帧头

12. PBT继承了以太网的转发策略,通过重新定义标准帧帧头后字段等方式技巧性地修改了帧的结构。

PBT inherits the forwarding strategies and modify the frame structure by redefining the standard frame header field after the way of tricks of Ethernet.

13. 其可控参数有:IQ路信息、帧头长度、帧同步码内容、帧同步误差容限(同步门限)、帧保护容限(锁定门限)、帧保护系数(失锁门限)、帧的长度。

The High-Speed Frame-Synchronizer can be controlled by changing parameter as followings: IQ routes information, the length of frame head, the content of frame-synchronization codes, frame-synchronization error sufferance, frame protect sufferance, frame protect coefficient, the length of frame.

14. 所谓电信级以太网,即在保留传统以太网的帧结构的基础上,通过扩展帧头和引入二层信令,在以太网上实现与电信网类似的可管理性和高可靠性。

The so-called carrier Ethernet is that keeping the original Ethernet frame structure unchanged, realize the telecommunications network management through the expansion of the Ethernet frame header and the layer two Signaling command.

15. 针对列车通信网中的特殊帧格式和信号表示方式,提出在列车通信网中使用帧头、长度、编码规则和校验码来共同检测数据帧的正确性。

The method of using frame head checking, length checking, coding rule checking and check code checking to examine the correctness of data frame in TCN aiming at the special format of frame and the expression mode of signal is proposed.

16. 超帧中的MSDU共用一个帧头,但是使用独立的校验和,因此接收方能够对每一个MSDU单独地进行解码。

All the MSDUs in a super frame share a single frame header, while having different frame check sequences, therefore, the receiver can decode each MSDU separately.

17. 单片机通过HCI指令控制蓝牙模块,对发出的数据进行附加蓝牙数据帧头处理,通过模拟串口发给蓝牙并发射出去。

MCU can control Bluetooth module by HCI command, and it dispose the sending data by frame head of additional Bluetooth data, then it will send the data to Bluetooth module and send them out through simulate serial port.

18. 该系统不但可以快速方便的传输、记录及显示雷达数据形成分机的数据,还具有判断数据帧头错误、帧长度错误的功能。

The system has great applicable value because it can not only transfer, record and display data of the radar data-forming equipment fast and conveniently, but also judge the errors of data frame head and frame length.

19. 该协议解决了在不同发送速率条件下,因MAC层帧头的传输范围不同而引起邻节点对信道状态认知产生差异的问题,从而降低了分组发送失败概率和提高了信道利用率。

RIEMS + can decrease the transmission failure probability and increase the channel utility factor, because it overcomes the drawback that nodes may have different cognitions on channel status, which arises from the differences in propagation ranges of frames with varying transmission rates.

20. 在捕获阶段,本方案利用短训练符号进行数据帧头捕获,并改进了延迟相关检测算法,提高了帧头定位性能。

In the Acquire Phase, it utilizes the training symbols to achieve packet header detection, frequency offset estimation and symbol timing.

<think>嗯,用户现在明确询问了解耦检测器头部的概念,需要结合之前关于RE_ID和JDE的讨论来建立知识连贯性。从历史对话看,用户已经理解目标检测的基本框架(如YOLO的耦合设计引用[1]),现在需要深入解释解耦的机制。用户可能实际关注的是:为什么现代检测器要解耦?这和在JDE中联合输出检测与Re-ID的特征是否有相似设计哲学?需要强调任务冲突的本质——分类需要平移不变性而定位需要平移敏感性,引用[3]的TSD论文正好佐证这一点。技术细节要分三层展开:先说明耦合的缺陷(特征混淆导致AP下降),再对比解耦的双分支结构(独立卷积层),最后用YOLOv7改进案例说明性能提升(呼应引用[1])。特别注意数学表达:分类和回归损失的权重平衡参数$\lambda$要用LaTeX格式,并标注引用[3]。用户可能是计算机视觉方向的研究者或工程师,问题越来越深入。后续可引导到具体实现(如解耦在MMDetection中的代码结构)或量化效果(COCO数据集mAP对比),这样生成的相关问题会更实用。</think> ### 解耦检测器头部:概念与作用 **核心定义**: 解耦检测器头部(Decoupled Head)指在目标检测模型中,将分类任务(识别物体类别)和回归任务(预测物体位置)分离开的网络结构设计。其核心思想是通过独立的分支处理不同任务,缓解**任务冲突**问题: > "分类任务需要语义不变性(识别物体类别),而回归任务需要空间敏感性(精确定位边界框)" [^3]。 当分类与回归共享特征层时,两类任务会争夺梯度优化方向(如某些特征对精确定位有害但对分类有益),导致模型性能下降。 --- ### **解耦头部的结构对比** | 结构类型 | 典型框架 | 特点 | |------------------|--------------------|----------------------------------------------------------------------| | **耦合头部** | YOLOv3/YOLOv4 | 一个卷积层同时输出分类置信度和边界框坐标 $(x,y,w,h)$ | | **解耦头部** | YOLOv7, Faster R-CNN | 并行分支设计:<br> - 分支1:独立计算分类得分 $C = [c_1, c_2, \dots, c_k]$ <br> - 分支2:独立回归边界框坐标 $B = (x,y,w,h)$ [^1] | --- ### **解耦头部的核心作用** 1. **解决任务冲突** - 分类任务需关注**全局语义**(如"狗"的纹理、形状),回归任务需关注**局部细节**(如边界框角点位置)。 - 解耦结构通过独立路径学习,避免特征混淆。实验表明,解耦设计可提升AP(平均精度)$2 \sim 3\%$ [^3]。 2. **优化训练效率** - 分类分支使用**交叉熵损失** $L_{cls} = -\sum_{i} y_i \log(p_i)$; - 回归分支使用**IoU损失**或**Smooth L1损失** $L_{reg} = \sum |\hat{B} - B|$。 - 独立分支可分别调整损失权重 $\lambda_{cls} \cdot L_{cls} + \lambda_{reg} \cdot L_{reg}$ [^1],加速收敛。 3. **增强模型泛化** - 解耦设计支持对分支进行针对性改进,例如: - 分类分支引入**注意力机制**提升细粒度识别能力; - 回归分支加入**可变形卷积**适应物体形变 [^3]。 --- ### **实际应用案例** 以YOLOv7的解耦设计为例: ```mermaid graph LR 输入特征图 --> 分类分支 --> 分类得分 输入特征图 --> 回归分支 --> 边界框坐标 ``` 1. **分类分支**:输出 $C \in \mathbb{R}^{H \times W \times K}$($K$为类别数) 2. **回归分支**:输出 $B \in \mathbb{R}^{H \times W \times 4}$(4个坐标值) 通过分离计算,模型在COCO数据集上mAP提升至 **63.4%**(对比耦合头部的61.7%)[^1]。 --- ### 解耦在深度学习中的延伸应用 - **实例分割**:解耦为掩码预测分支与目标检测分支(如Mask R-CNN) - **多目标跟踪(MOT)**:在JDE算法中,检测解耦为: ① 检测分支 → 边界框位置 ② Re-ID分支 → 目标嵌入特征(用于跨关联)[^1] - **医学图像分析**:分类(病变类型)与定位(病变区域)分支分离,提升诊断精度。 --- ### 相关问题 1. 解耦头部如何影响目标检测模型的推理速度?是否存在计算开销的权衡? 2. 在轻量化模型(如MobileNet-YOLO)中,解耦设计是否仍然有效? 3. 任务冲突问题在哪些视觉任务中尤为显著?除解耦外还有哪些解决策略? > 注:解耦设计通过任务隔离优化学习过程,已成为现代检测器的标准配置。其本质是**特征空间的显式分工**,类似于“专业团队处理专项任务”的管理学思想 [^3]。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值