全志H3-script.fex配置手册_axp809资源-CSDN下载

5星 · 超过95%的资源需积分: 49 108 浏览量 2016-04-05 08:44:05 上传评论 1 收藏 1.9MB PDF 举报

### 全志 H3-script.fex 配置手册解析 #### 概述 - **编写目的**：全志 H3-script.fex 配置手册旨在为开发者提供详细的配置指南，帮助用户正确设置 H3 芯片的各项参数，以便更好地发挥硬件性能。 - **使用范围**：本手册适用于所有基于全志 H3 芯片的开发板或设备。 - **目标读者**：主要针对硬件工程师、嵌入式系统开发者以及对全志 H3 芯片感兴趣的高级用户。 #### 系统(System) - **[platform]**：此部分定义了平台的基本配置信息，包括芯片型号、系统架构等基本信息。 - **[target]**：用于指定目标设备的具体配置，例如内存大小、外设支持等。 - **[power_sply](axp809)**：这部分涉及电源管理模块 AXP809 的配置，包括电压调节、电流限制等参数设置。 - **[slave_power_sply](axp806)**：针对辅助电源管理芯片 AXP806 的配置，通常用于扩展电源管理功能。 - **[gpio_bias]**：配置 GPIO 引脚偏置电压，确保 GPIO 在不同工作模式下的稳定性。 - **[pm_para]**：电源管理参数配置，包括睡眠模式下的电源管理策略等。 - **[card_boot]**：定义启动存储介质的相关参数，如启动顺序、介质类型等。 - **[card_boot0_para]**：进一步细化第一个启动介质的参数设置。 - **[card_boot2_para]**：进一步细化第二个启动介质的参数设置。 - **[twi_para]**：配置 I2C 总线的基本参数，如时钟频率、地址等。 - **[uart_para]**：配置 UART 接口的基本参数，如波特率、数据位等。 - **[jtag_para]**：配置 JTAG 接口的参数，用于调试和固件更新。 - **[clock]**：全局时钟配置，包括主时钟频率、PLL 设置等。 #### SDRAM - **[dram_para]**：SDRAM 内存配置参数，包括内存大小、工作频率等关键信息。 #### GMAC - **[gmac_para]**：千兆以太网控制器（GMAC）的配置参数，涉及网络接口的速度、双工模式等。 #### I2C 总线 - **[twi0_para]** 至 **[twi4_para]**：分别为 I2C 总线 0 至 4 的详细配置参数，每条总线都有其特定的用途和连接设备。 #### 串口(UART) - **[uart_para0]** 至 **[uart_para5]**：配置六个 UART 接口的具体参数，每个 UART 接口可能连接不同的外部设备。 #### SPI 总线 - **[spi0_para]** 至 **[spi3_para]**：分别配置 SPI 总线 0 至 3 的基本参数，包括时钟速度、数据宽度等。 - **[spi_devices]**：列出 SPI 总线上连接的设备及其配置信息。 - **[spi_board0]**：特定于 SPI 板的配置信息，用于支持不同的 SPI 设备组合。 #### 电阻屏(rtp) - **[rtp_para]**：配置电阻触摸屏的相关参数，如触摸灵敏度、坐标映射等。 #### 电容屏(capacitive tp) - **[ctp_para]**：配置电容触摸屏的参数，包括触摸识别算法、校准等。 #### 触摸按键(touchkey) - **[tkey_para]**：配置触摸按键的功能和灵敏度等参数。 #### 马达(motor) - **[motor_para]**：配置马达驱动的相关参数，包括驱动电压、电流限制等。 #### 闪存（nand flash） - **[nand0_para]** 和 **[nand1_para]**：分别为两个 NAND Flash 存储器的配置参数，涉及页大小、块大小等。 #### 显示初始化(dispinit) - **[disp_init]**：配置显示初始化流程，包括显示器分辨率、颜色深度等。 #### LCD 屏 - **[lcd0_para]** 和 **[lcd1_para]**：分别为两个 LCD 显示屏的详细配置参数，如分辨率、刷新率等。 #### HDMI - **[hdmi_para]**：配置 HDMI 输出的相关参数，包括视频格式、音频编码等。 #### 摄像头(CSI) - **[csi0_para]** 和 **[csi1_para]**：分别为两个 CSI 接口摄像头的配置参数，涉及图像传感器的特性、预处理等。 #### SD/MMC - **[mmc0_para]** 至 **[mmc3_para]**：分别为四个 MMC 卡槽的配置参数，涉及卡类型、工作模式等。 #### SIM 卡 - **[smc_para]**：配置 SIM 卡读取器的相关参数，如通信协议、供电电压等。 #### USB 控制标志 - **[usbc0]** 至 **[usbc3]**：分别为四个 USB 控制器的配置参数，涉及数据传输速率、端口号分配等。 #### USB Device - **[usb_feature]** 和 **[msc_feature]**：配置 USB 设备的功能特性，如支持的设备类型、存储容量等。 #### 重力感应(GSensor) - **[gsensor_para]**：配置加速度计的相关参数，如采样频率、量程等。 #### WIFI - **[wifi_para]**：配置 Wi-Fi 模块的参数，包括无线网络的加密方式、信号强度等。 - **sdio接口wifirtl8723asdemo**：具体示例，展示如何通过 SDIO 接口配置 Realtek RTL8723AS Wi-Fi 模块。《全志 H3-script.fex 配置手册》涵盖了从基本系统配置到各种外设接口的具体设置方法，是开发基于全志 H3 芯片产品的必备参考文档。通过对这些配置项的理解与应用，开发者能够充分利用 H3 芯片的强大性能，并实现高度定制化的硬件解决方案。

资源推荐

资源详情

资源评论

１．０－ＣＮ

全志Ｈ３　ｓｃｒｉｐｔ．ｆｅｘ

配置手册

1.概述............................................................................................................................................................6

1.1.编写目的.........................................................................................................................................6

1.2.使用范围.........................................................................................................................................6

1.3.目标读者.........................................................................................................................................6

2.系统(System)..............................................................................................................................................7

2.1.[platform]..........................................................................................................................................7

2.2.[target]...............................................................................................................................................7

2.3.[power_sply](axp809).......................................................................................................................7

2.4.[slave_power_sply](axp806).............................................................................................................8

2.5.[gpio_bias]........................................................................................................................................9

2.6.[pm_para]........................................................................................................................................10

2.7.[card_boot]......................................................................................................................................10

2.8.[card_boot0_para]...........................................................................................................................10

2.9.[card_boot2_para]...........................................................................................................................11

2.10.[twi_para]......................................................................................................................................12

2.11.[uart_para].....................................................................................................................................12

2.12.[jtag_para].....................................................................................................................................12

2.13.[clock]...........................................................................................................................................13

3.SDRAM.....................................................................................................................................................13

3.1.[dram_para].....................................................................................................................................13

4.GMAC.......................................................................................................................................................15

4.1.[gmac_para]....................................................................................................................................15

5.I2C总线....................................................................................................................................................17

5.1.[twi0_para]......................................................................................................................................17

5.2.[twi1_para]......................................................................................................................................17

5.3.[twi2_para]......................................................................................................................................18

5.4.[twi3_para]......................................................................................................................................18

5.5.[twi4_para]......................................................................................................................................18

6.串口(UART).............................................................................................................................................18

6.1.[uart_para0].....................................................................................................................................19

6.2.[uart_para1].....................................................................................................................................19

6.3.[uart_para2].....................................................................................................................................20

6.4.[uart_para3].....................................................................................................................................20

6.5.[uart_para4].....................................................................................................................................21

6.6.[uart_para5].....................................................................................................................................21

7.SPI总线.....................................................................................................................................................22

7.1.[spi0_para]......................................................................................................................................22

7.2.[spi1_para]......................................................................................................................................22

7.3.[spi2_para]......................................................................................................................................23

7.4.[spi3_para]......................................................................................................................................23

7.5.[spi_devices]...................................................................................................................................24

7.6.[spi_board0]....................................................................................................................................24

8.电阻屏(rtp)...............................................................................................................................................24

8.1.[rtp_para].........................................................................................................................................24

9.电容屏(capacitortp).................................................................................................................................25

9.1.[ctp_para]........................................................................................................................................25

10.触摸按键(touchkey)..............................................................................................................................26

10.1.[tkey_para]....................................................................................................................................26

11.马达(motor)............................................................................................................................................26

11.1.[motor_para]..................................................................................................................................26

12.闪存（nand0flash）..............................................................................................................................27

12.1.[nand0_para].................................................................................................................................27

12.2.[nand1_para].................................................................................................................................28

13.显示初始化(dispinit).............................................................................................................................29

13.1.[disp_init]......................................................................................................................................29

14.LCD屏0.................................................................................................................................................31

14.1.[lcd0_para]....................................................................................................................................31

15.LCD屏1.................................................................................................................................................34

15.1.[lcd1_para]....................................................................................................................................34

16.HDMI.......................................................................................................................................................34

16.1.[hdmi_para]...................................................................................................................................34

17.摄像头(CSI)............................................................................................................................................34

17.1.[csi0_para].....................................................................................................................................35

17.2.[csi1_para].....................................................................................................................................38

18.SD/MMC...............................................................................................................................................41

18.1.[mmc0_para].................................................................................................................................41

18.2.[mmc1_para].................................................................................................................................42

18.3.[mmc2_para].................................................................................................................................43

18.4.[mmc3_para].................................................................................................................................44

19.SIM卡.....................................................................................................................................................46

19.1.[smc_para].....................................................................................................................................46

20.USB控制标志.........................................................................................................................................46

20.1.[usbc0]..........................................................................................................................................46

20.2.[usbc1]..........................................................................................................................................47

20.3.[usbc2]..........................................................................................................................................48

20.4.[usbc3]..........................................................................................................................................49

21.USBDevice.............................................................................................................................................49

21.1.[usb_feature].................................................................................................................................49

21.2.[msc_feature]................................................................................................................................50

22.重力感应(GSensor)...............................................................................................................................50

22.1.[gsensor_para]...............................................................................................................................50

23.WIFI.........................................................................................................................................................51

23.1.[wifi_para].....................................................................................................................................51

23.2.sdio接口wifirtl8723asdemo......................................................................................................52

23.3.usb接口wifirtl8188eudemo......................................................................................................53

24.3G............................................................................................................................................................53

24.1.[3g_para].......................................................................................................................................53

25.gyroscope.................................................................................................................................................54

25.1.[gy_para].......................................................................................................................................54

26.光感(lightsensor)...................................................................................................................................55

26.1.[ls_para]........................................................................................................................................55

27.罗盘Compass.........................................................................................................................................55

27.1.[compass_para].............................................................................................................................55

28.蓝牙(blueteeth).......................................................................................................................................56

28.1.[bt_para]........................................................................................................................................56

29.数字音频总线（TDM）........................................................................................................................56

29.1.[s_i2s1]..........................................................................................................................................56

30.数字音频总线（S/PDIF）.....................................................................................................................58

30.1.[spdif0]..........................................................................................................................................58

31.Codec配置..............................................................................................................................................59

31.1.[audio0].........................................................................................................................................59

32.红外(ir)...................................................................................................................................................59

32.1.[s_cir0]..........................................................................................................................................59

32.2.[cir]................................................................................................................................................60

33.PMU电源................................................................................................................................................60

33.1.[pmu1_para]..................................................................................................................................60

33.2.[pmu2_para]..................................................................................................................................65

34.Vf表设置................................................................................................................................................66

34.1.cluster0vf表配置说明.................................................................................................................66

[dvfs_table]............................................................................................................................................66

34.2.Cluster1vf表配置说明................................................................................................................67

35.Pinctrl测试.............................................................................................................................................68

36.[s_uart0]...................................................................................................................................................68

37.[s_rsb0]....................................................................................................................................................69

38.[s_jtag0]...................................................................................................................................................69

39.Declaration...............................................................................................................................................70