
StarterWare 02.00.01.01 Release Notes
2
Real-Time
Clock (RTC)
€ Time Set and Get € Time Set and Get € Time Set and Get
USB € CDC Serial Device Mode
€ Custom Bulk Device Mode
€ MSC•Device Mode
€ Mouse Device Mode
€ MSC Host Mode
€ Mouse Host Mode
€ MSC Host + MSC Device Mode
€ MSC Host + Mouse Host
€ Composite CDC Serial (device) +
CDC Serial (device)
€ Composite CDC Serial (device) +
Mouse
€ CDC Serial Device Mode
€ Custom Bulk Device Mode
€ MSC Device Mode
€ MSC Host
€ MSC Host + MSC Device
€ CDC Serial (device) + CDC
Serial (device)
Other examples are not supported
due to limitations on beaglebone
(baseboard)
1. USB0 port is used for debugger
connection and serial port
emulation
2. LCD cape daughter board is not
supported in StarterWare
€ CDC Serial Device Mode
€ Custom Bulk Device Mode
€ MSC Device Mode
€ Mouse Device Mode
€ MSC Host Mode
€ Mouse Host Mode
€ MSC Host + MSC Device Mode
€ CDC Serial (device) + CDC Serial (device)
€ Composite CDC Serial (device) + Mouse
Other examples are not supported as USB0 port
is used for debugger connection and serial port
emulation.
Ethernet € Embedded Web Page Access
€ Echo Application with
socket-programming
€ Embedded Web Page Access
€ Echo Application with
socket-programming
€ Embedded Web Page Access - Default in
Dual MAC mode
€ Echo Application with socket-programming
- Default in Dual MAC mode
€ Undefining CPSW_DUAL_MAC_MODE in
lwipopts.h, both examples can be
demonstrated in switch mode
McASP € Audio Loop-Back Audio Jacks are not available in BB
(base board)
€ Tone Play (Audio IN•jack is not available in
EVM-SK)
EDMA € Memory to memory transfer € Memory to memory transfer € Memory to memory transfer
Raster € Image Display LCD cape daughter board is not
supported in StarterWare
€ Image Display
GPMC € NAND Read Write No device is connected to GPMC
on BB (base board)
No device is connected to GPMC on EVM-SK
ELM € NAND Read Write (Error
Location•Detection)
No device is connected to ELM on
BB (base board)
No device is connected to ELM on EVM-SK
ECAP Available only as part of OOB Demo
(LCD€brightness control)
LCD cape daughter board is not
supported in StarterWare
Available only as part of OOB€ Demo€(LCD
brightness control)
DCAN € Board-to-Board communciation The DB9 connectors are not
available in BB (base board)
The DB9 connectors are not available in
EVM-SK
TSC-ADC € Touch Screen Calibration LCD cape daughter board is not
supported in StarterWare
€ Touch Screen Calibration
EHRPWM € Rotation of Haptics Motor (available
in EVM daughterboard rev. 1.0E and
above only)
No device is connected to
EHRPWM in BB (base board)
No device is connected to EHRPWM in EVM-SK
Bootloader € MMCSD Boot
€ UART Boot
€ SPI Boot
€ NAND Boot
€ MMCSD Boot
€ UART Boot
SPI and NAND•flash devices are
not available in BB (base board)
€ MMCSD Boot
€ UART Boot
SPI and NAND flash devices are not available in
EVM-SK
Graphics
Library
€ Graphics Library Demo
€ Maze Game
LCD cape daughter board is not
supported in StarterWare
€ Graphics Library Demo
€ Maze Game