cpuz cpu查看软件

CPU-Z Readme file ------------------ Version 1.44.1 February 2008 Contact : [email protected] Web page: http://www.cpuid.com/cpuz.php Validation page : http://valid.x86-secret.com/ Forum : http://forum.x86-secret.com/forumdisplay.php?f=16 CPUID SDK : http://www.cpuid-pro.com/devkits.php CPU-Z is a freeware and can be freely distributed. Configuration file (cpuz.ini) ------------------------------ The configuration file must be named cpuz.ini and be present at the same directory level as cpuz.exe. It contains the following : [CPU-Z] TextFontName=Verdana TextFontSize=13 TextFontColor=000060 LabelFontName=Verdana LabelFontSize=13 PCI=ON MaxPCIBus=256 DMI=ON Sensor=ON SMBus=ON - TextFontName : Font used for the information boxes. - TextFontSize : Size of the font used for the information boxes. - TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB - LabelFontName : Font used for the label boxes. - LabelFontSize : Size of the font used for the label boxes. - Sensor : Set to OFF disables sensor chip detection and voltages measurement. - PCI : Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. - MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256. - DMI : Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. - SMBus : Set to OFF disables SMBus information : SPD, and, depending on the hardware, sensoring information. Parameters ---------- -txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt) in the same directory as the exe file. -html=filename : Same as "-txt" except it generates the html report. -core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one). Keys ---- F5 : save the current tab in a bmp file F6 : save the current tab in the clipboard F7 : save cvf file in the current directory Cache Latency Tool ------------------ The cache latency tool can be downloaded at that address : http://www.cpuid.com/download/latency.zip History ------- -------------------------------------------------------------------------------------------------- 1.44.1 - February 2008 - Support for the new validator (1.44.1) - Preliminary support for VIA Isaiah processor. - Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden. - Memory timings on Intel 5400A/B MCH (Skulltrail). - Fix AMD Phenom detection issue on Windows Vista 64. MD5 : 0C616B3043148B7837D7B53ED3F2B80C -------------------------------------------------------------------------------------------------- 1.43 - January 2008 - Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH). - Intel X48 chipset detection. - AMD Athlon 64-LE 1600 and 1620 support. - Fix detection issues on unlocked Phenom (ES/BE). -------------------------------------------------------------------------------------------------- 1.42 - November 2007 - Intel Wolfdale/Yorkfield/Penryn CPUs support. - AMD Phenom and Opteron Barcelona support improved. - Current core selection menu (right click on the CPU page). - Loading progress. -------------------------------------------------------------------------------------------------- 1.41 - September 2007 - New CPU voltage monitoring. - Intel Xeon Tigerton support. - Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe). - AMD K10 Phenom preliminary support. - NVIDIA MCP73 support. - Intel XMP profiles support. - Memory modules nominal voltage. -------------------------------------------------------------------------------------------------- 1.40.5 - July 2007 - NVIDIA nForce 560 chipset support. - Intel Dynamic FSB technology support. - Athlon 64 X2 BE & Sempron LE (TDP 45W). - SiS671/FX/DX/MX northbridge support. - SiS968 southbridge support. -------------------------------------------------------------------------------------------------- 1.40 - May 2007 - VIA P4M800CE chipset support. - Preliminary support for Intel Penryn CPUs family (45 nm). - Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition. - Intel P35, G33, G31, Q35, Q33, X38 chipsets support. - Intel GL960/GM965/PM965 chipsets support. - AMD Athlon 64 "Lima" processor support. - AMD Geode LX processor support. - NVIDIA nForce 520 chipset support. - New parameter "-console" to generate output in a command prompt (Windows XP only). - New icon. -------------------------------------------------------------------------------------------------- 1.39 - February 2007 - Windows Vista 64 support. - VIA CX700/VX700 chipset. - Added Merom XE (X7900/X7800) - Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning. - Added "-core" parameter to display the clock speed of the specified core. - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.38 - November 2006 - VIA P4M890 and P4M900 chipsets. - NVIDIA 650i and 680i chipset. - AMD Athlon 64 FX-7x processor. - Core 2 Duo E6850, E6750, E6650 processors. - socket 775 Xeon processor. - New parameters "-txt" and "-html" (see above). - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.37 - October 2006 - Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support. - Changed SSE4 to SSSE3 (Supplemental SSE3). - Added VIA VT8237A southbridge. - New HTML report. - Several bug fixes. -------------------------------------------------------------------------------------------------- 1.36 - August 2006 - New processor information display. - Intel 5000X/P/Z/V SPD support. - Intel Pentium D 925 & 945. -------------------------------------------------------------------------------------------------- 1.35 - June 2006 - ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support. - ATI SB600 southbridge support. - Intel P965 chipset support. - Engineering samples Core based CPUs report. - Windows Vista product line report. -------------------------------------------------------------------------------------------------- 1.34.1 - May 2006 - AMD socket AM2/S1/F (rev F.) CPUs support. - Enhanced Performance Profile (EPP) memory information report. - Added Trc (bank cycle time) in DDR2 SPD report. - Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets. - FB-DIMM DDR2 SPD information report. - Core 2 Duo names and logos added. - Turion 64 X2 logo added. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.33.1 - April 2006 - Intel i965 chipset support added. - Fix SPD detection problem on SiS 964/965/966 southbridges. - ODC (Odd Divisor Correct) for Athlon64 rev E. -------------------------------------------------------------------------------------------------- 1.33 - April 2006 - Memory Command Rate timing added. - Improved support for Intel Conroe/Merom CPUs. - Celeron M 420/430 Yonah. - Xeon Dual core Dempsey. - VIA C7-M CPU detection added. - VIA PT880, PT880 Pro, K8T900 chipsets support. - nVidia nForce 550/560/570 (MCP55) chipset support. - VIA VT8251 southbridge support. - Fixed HyperTransport information misreports (in dump file). - Added K6-2 and K6-III logos. -------------------------------------------------------------------------------------------------- 1.32.1 - March 2006 - New Intel logos. - Added Pentium D 925, Pentium EE 965. - Several bugs fixed. ------------------------------------------------------------------------------------------