没有合适的资源?快使用搜索试试~ 我知道了~
村田电容
资源推荐
资源详情
资源评论


格式:pdf 资源大小:14.2MB 页数:154























格式:pdf 资源大小:4.4MB 页数:127

格式:pdf 资源大小:11.9MB 页数:13

格式:pdf 资源大小:42.4MB 页数:173




Chip Multilayer Ceramic Capacitors
for General
2018
C02E.pdf
Nov.27,2017

For applications that do not require the particular reliability such as
the general equipment
Powertrain/Safety for Automotive
Product used for applications (running, turning, stopping and safety
devices) which particularly concern human life, such as in devices for
automobiles.
Infotainment for Automotive
The product for entertainment equipment like car navigations, car
audios, and body control equipment like wipers, power windows.
Medical-grade products for Implanted Medical Devices
These products are intended for use in implanted medical devices
such as cardiac pacemakers, cochlear implants, insulin pumps and
gastric electrostimulators.
They are suitable for use in non-critical circuits.
*1
*1
Non-critical circuits
This term refers to circuits in implanted medical devices that are
not directly linked to life support, i.e. circuits that will not directly
endanger the life of the patient should the functionality of the
device be reduced or halted by failure of the circuit.
AEC-Q200 compliant product
Derating 1
This product is suitable when a voltage continuously applied to a
capacitor in an operating circuit, is used below (derated) the rated
voltage of the capacitor. This model guarantees the test conditions in
the endurance test, at a rated voltage x 100% at the maximum
operating temperature. A reliability assurance level equivalent to a
common product can be secured, by using this product within the
voltage and temperature derated conditions recommended in the
figure below.
Derating 2
When the product temperature exceeds 105°C, please use this
product within the voltage and temperature derated conditions in the
figure below.
Derating 4
When the product temperature exceeds 125°C, please use this
product within the voltage and temperature derated conditions in the
figure below.
Derating 3
Please apply the derating curve according to the operating
temperature.
Please refer to detailed specifications sheet for details.
Derating 5
Please apply the rated voltage derating over 150 °C.
Please refer to detailed specifications sheet for details.
Safety Standard Certified Product
Products that acquired safety standard certification IEC60384-14
and products based on the Electrical Appliance and Material Safety
Law of Japan.
Low dissipation for high frequency
By devising ceramic materials and electrode materials, low
dissipation is achieved in frequency bands of VHF, UHF and
microwave or beyond.
Low inductance
This capacitor is designed so that the parasitic inductance
component (ESL) that the capacitor has on the high frequency side
becomes lower.
Product suitable for acoustic noise reduction and low distortion
This product suppresses acoustic noise, which occurs when a
ceramic capacitor is used, by devising the materials and
configuration.
Links are provided to the latest information from the PDF version of the catalog, which is available on the web.
Fail safe product
This capacitor is designed to prevent failures as much as possible by
short mode.
Based on the Electrical Appliance and Material Safety Law of Japan
Products that are based on the electrical appliance and material
safety law of Japan.
Product resistant to deflection cracking
This capacitor is designed to prevent failures as much as possible by
short mode caused by cracking when there is board deflection.
Product with solder cracking suppression
“This capacitor is configured with metal terminals and leads
connected to the chip. The metal terminals and leads relieve the
stress from expansion and contraction of the solder, to suppress
solder cracking.”
Low-inductance product suitable for noise suppression.
This product has extremely low ESL and is suitable for suppression
of noise, including high frequencies.
This product can also be used as a low-ESL, high-performance
bypass capacitor.
Product for bonding
Since gold is used for the external electrodes, the capacitor can be
mounted by die bonding/wire bonding.
No DC bias characteristics
Polymer capacitor is no capacitance change with DC bias due to
aluminum oxidized film for dielectric.
Recommended Conditions of the Derating Operating Voltage and Temperature
0255075100125150
0
20
40
60
80
100
120
Product Temperature (°C)
Operating Voltage/Rated Voltage (%)
125°C Type
105°C Type
85°C Type
0255075100125150
0
Product Temperature (°C)
Operating Voltage/Rated Voltage (%)
400
500
100
200
300
600
700
Rated Voltage 630V
Rated Voltage 450V
(350V)
(450V)
-75 -50 -25 0 25 50 75 100 125 150 175
0
Product Temperature (°C)
Operating Voltage/Rated Voltage (%)
120
100
80
60
40
20
(50)
Explanation of Symbols in This Catalog
WEB
C02E.pdf
Nov.27,2017
!
Note
• Please read rating and
!
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2

WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
WEB
Infotainment for automotive
Powertrain/Safety for automotive
Medical-grade products for implanted medical devices
SMD
SMD
SMD
Solder mounting
Solder mounting
Chip type
Chip type
High eective capacitance &
high ripple current
For LCD backlight inverter circuit
only
High eective capacitance &
high ripple current
So termination
For information devices only
For camera flash circuit only
High power
Based on the Electrical Appliance
and Material Safety Law of Japan
LW reversed
8 terminals
10 terminals
LW reversed controlled ESR
3 terminals
Low distortion
Low acoustic noise
High eective capacitance &
high ripple current
Microchip
High temperature low loss
High temperature Class 1
Class 2
For LCD backlight inverter circuit
only
Based on the Electrical Appliance
and Material Safety Law of Japan
X1/Y1 Class certified product
X1/Y2 Class certified product
High voltage AC rated
So termination
MLSC design
So termination MLSC design
MLSC design
3 terminals
High eective capacitance &
high ripple current
Ni plating + Pd plating termination
conductive glue mounting
AgPd termination conductive glue
mounting
150°C operation leaded
200°C operation leaded
For general
SMD
Solder mounting
Chip type
On interposer board
Metal terminal type
Resin molding SMD type
Wire bonding mounting
Lead type
Screw termination mounting
Solder mounting
Chip type
Metal terminal type
Chip type
Chip type
Lead type
Solder mounting
Limited to Conductive Glue Mounting
Solder mounting
p40
p109
p120
p125
p130
p135
p164
p184
p189
p219
p222
p228
p232
p236
p239
p243
p249
p256
GRT
GCM
GRM
GRM
GR3
GRJ
GXM
GR4
GR7
GJM
GQM
GA2
GA3
LLL
LLA
LLM
LLR
NFM
GJ4
GJ8
ZRA
ZRB
KRM
KR3
DK1
GMA
GMD
RDE
DEH
DEA
DEB
DEC
DEF
DHR
DEJ
DE1
DE2
DHS
DHK
GC3
GCJ
GGM
GCQ
GCD
GCE
GGD
NFM
KCM
KC3
KCA
GCB
GCG
RCE
RHE
RHS
DE6
GCH
Selection Guide for Capacitors
C02E.pdf
Nov.27,2017
!
Note
• Please read rating and
!
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3

(Part Number)
1Product ID 2Series
Chip Multilayer Ceramic Capacitors for General
3Chip Dimensions (LxW)
2
GR
1
M
3
18
4
8
5
B1
6
1H
7
102
8
K
9
A01
:
D
Code
0.4x0.2mm
0.38x0.38mm
0.6x0.3mm
0.5x0.5mm
0.8x0.8mm
0.6x1.0mm
1.0x0.5mm
1.6x0.8mm
2.0x1.25mm
2.8x2.8mm
3.2x1.6mm
3.2x2.5mm
4.5x2.0mm
4.5x3.2mm
5.7x2.8mm
5.7x5.0mm
Dimensions (LxW)
01005
015015
0201
0202
0303
02404
0402
0603
0805
1111
1206
1210
1808
1812
2211
2220
EIA
02
0D
03
05
08
1U
15
18
21
22
31
32
42
43
52
55
o Part Numbering
GA
GJ
GM
GQ
GR
KR
LL
2
3
M
A
D
M
3
4
7
J
M
3
M
A
L
M
R
Based on the Electrical Appliance and Material Safety Law of Japan Chip Multilayer Ceramic Capacitors for General Purpose
Safety Standard Certified Chip Multilayer Ceramic Capacitors for General Purpose
High Q Chip Multilayer Ceramic Capacitors for General Purpose
Wire Bonding Mount Multilayer Microchip Capacitors for General Purpose
Wire Bonding/AuSn Soldering Mount Chip Multilayer Ceramic Capacitors for General Purpose
High Q and High Power Chip Multilayer Ceramic Capacitors for General Purpose
High Eective Capacitance & High Ripple Current Chip Multilayer Ceramic Capacitors for General Purpose
Chip Multilayer Ceramic Capacitors for Camera Flash Circuit only
Chip Multilayer Ceramic Capacitors for Ethernet LAN and Primary-secondary Coupling of DC-DC Converters
So Termination Chip Multilayer Ceramic Capacitors for General Purpose
Chip Multilayer Ceramic Capacitors for General Purpose
High Eective Capacitance & High Allowable Ripple Current Metal Terminal Type Multilayer Ceramic Capacitors for General Purpose
Metal Terminal Type Multilayer Ceramic Capacitors for General Purpose
8 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
LW Reversed Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
10 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
LW Reversed Controlled ESR Low ESL Chip Multilayer Ceramic Capacitors for General Purpose
Product ID Code Series
Continued on the following page.
WEB
C02E.pdf
Nov.27,2017
!
Note
• Please read rating and
!
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5

(Part Number)
2
GR
1
M
3
18
4
8
5
B1
6
1H
7
102
8
K
9
A01
:
D
4Height Dimension (T) (KRp Only)
Code
E
F
K
L
Q
T
W
1.8mm
1.9mm
2.7mm
2.8mm
3.7mm
4.8mm
6.4mm
Dimension (T)
A
B
C
D
E
M
Q
X
1.0mm
1.25mm
1.6mm
2.0mm
2.5mm
1.15mm
1.5mm
Depends on individual standards.
4Height Dimension (T) (Except KRp)
Code
2
3
4
5
6
7
8
9
0.2mm
0.3mm
0.4mm
0.5mm
0.6mm
0.7mm
0.8mm
0.85mm
Dimension (T)
Continued from the preceding page.
5Temperature Characteristics
Code
Temperature
Characteristic Codes
Public
STD Code
Reference
Temperature
Temperature Characteristics Capacitance Change Each Temperature (%)
Capacitance Change
or Temperature
Coecient
Operating
Temperature
Range
–55°C
Max.
*6 –10°C
Temperature
Range
SL
CH
CJ
UJ
CK
C0G
X8G
U2J
B *1
B
X7S
X6S
X7T
X6T
X7U
R *1
X5R
X7R
X7T
JIS
JIS
JIS
JIS
JIS
EIA
*2
EIA
JIS
JIS
EIA
EIA
EIA
EIA
EIA
JIS
EIA
EIA
EIA
20°C
20°C
20°C
20°C
20°C
25°C
25°C
25°C
20°C
20°C
25°C
25°C
25°C
25°C
25°C
20°C
25°C
25°C
25°C
1X
2C
3C
3U
4C
5C
5G
7U
B1
B3
C7
C8
D7
D8
E7
R1
R6
R7
W0
20 to 85°C
20 to 125°C
20 to 125°C
20 to 85°C
20 to 125°C
25 to 125°C
25 to 150°C
25 to 125°C
*3
–25 to 85°C
–25 to 85°C
–55 to 125°C
–55 to 105°C
–55 to 125°C
–55 to 105°C
–55 to 125°C
–55 to 125°C
–55 to 85°C
–55 to 125°C
–55 to 125°C
+350 to –1000ppm/°C
0±60ppm/°C
0±120ppm/°C
–750±120ppm/°C
0±250ppm/°C
0±30ppm/°C
0±30ppm/°C
–750±120ppm/°C
±10%
±10%
±22%
±22%
+22%, –33%
+22%, –33%
+22%, –56%
±15%
±15%
±15%
±10% *4
+22%, –33% *5
–55 to 125°C
–55 to 125°C
–55 to 125°C
–25 to 85°C
–55 to 125°C
–55 to 125°C
–55 to 150°C
–55 to 125°C
–25 to 85°C
–25 to 85°C
–55 to 125°C
–55 to 105°C
–55 to 125°C
–55 to 105°C
–55 to 125°C
–55 to 125°C
–55 to 85°C
–55 to 125°C
–55 to 125°C
-
0.82
1.37
-
2.56
0.58
0.58
8.78
-
-
-
-
-
-
-
-
-
-
-
-
Min.
-
–0.45
–0.9
-
–1.88
–0.24
–0.24
5.04
-
-
-
-
-
-
-
-
-
-
-
-
Max.
-
0.49
0.82
4.94
1.54
0.4
0.4
6.04
-
-
-
-
-
-
-
-
-
-
-
-
Min.
-
–0.27
–0.54
2.84
–1.13
–0.17
–0.17
3.47
-
-
-
-
-
-
-
-
-
-
-
-
Max.
-
0.33
0.55
3.29
1.02
0.25
0.25
3.84
-
-
-
-
-
-
-
-
-
-
-
-
Min.
-
–0.18
–0.36
1.89
–0.75
–0.11
–0.11
2.21
-
-
-
-
-
-
-
-
-
-
-
-
*1 Capacitance change is specified with 50% rated voltage applied.
*2 Murata Temperature Characteristic Code.
*3 Rated Voltage 100Vdc max: 25 to 85°C
*4 Apply DC350V bias.
*5 No DC bias.
*6 –25°C (Reference Temperature 20°C) / –30°C (Reference Temperature 25°C)
Continued on the following page.
C02E.pdf
Nov.27,2017
!
Note
• Please read rating and
!
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
剩余52页未读,继续阅读
资源评论


qq_28873853
- 粉丝: 0
上传资源 快速赚钱
我的内容管理 展开
我的资源 快来上传第一个资源
我的收益
登录查看自己的收益我的积分 登录查看自己的积分
我的C币 登录后查看C币余额
我的收藏
我的下载
下载帮助


最新资源
- 中学校园网站的方案设计书(1).doc
- 数据库自治技术架构解读.pptx
- 算法工程师的个人简历模板.doc
- 基于单片机的步进电机控制系统方案设计书03085.doc
- 单片机原理及接口技术课程设计.doc
- 云计算背景下计算机安全问题及对策.docx
- 专业定制级别互联网电商推广宣传创业计划书优秀ppt模板课件【精选模板】.ppt
- 2014年度混凝土与水泥制品行业技术革新奖获奖项目管理展示(五).doc
- 定向增发项目管理收益率的二因子分解模型及溢价率的项目管理质地假说.doc
- 信息化施工组织设计专业技术方案.doc
- 基于云计算的虚拟化实验室设计与实现.docx
- 芜湖铁画在互联网时代下的发展出路探析.docx
- 2017公需课《网络效应》和《专业技术人员知识重点创造与经营》练习题答案.doc
- 互联网+背景下的情景式和互动式教学模式探究.docx
- 新形势下计算机网络信息安全存在的威胁及对策分析.docx
- JAVA网吧管理.doc
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈



安全验证
文档复制为VIP权益,开通VIP直接复制
