atp-emtp仿真软件.zip

Instructions to compile the ATP ------------------------------- I- To change the dimensions 1. Edit the file listsize.ext, and set the size of each table as required. 2. Run the command file vardimn.bat. Vardimn.bat runs vardim.exe and the files dimdef.f and newmods.f are created. > vardimn listsize.ext Edit the file tacsar.ins and change the dimension to the same value of SPTACS in newmods.f. This step is not mandatory, but it will avoid a lot of annoying but innocuous messages. 3. Edit makefile, and change the directory where the DISLIN graphic library was installed. If DISLIN graphic library is not present, a dummy library dislin.a can be used, as explained in makefile. DISLIN is available via ftp anonymous from the following sites: - ftp://ftp.gwdg.de/pub/grafik/dislin - ftp://linhmi.mpae.gwdg.de/pub/dislin 4. Run make with makefile as argument. > make II. To obtain a COMPILED TACS version of tpbig. At first, set environment variable COMPTACS as "MAKE", and run. > COMPTACS=MAKE > del comtac.o > runtp datafile Then, the following three files are created. decktac1.inc decktac2.inc codetacs.inc This files must be copied to comta1.ins, comta2.ins and comta3.ins respectively, as required by comtac.f. It is better to include "SINGLE STEP IF MAKE" in data files. By this command, tpbig stops immediately after creating the above three files. Without this command, tpbig doesn't stop until the simulation reaches tmax. The batch file comtac1.bat does this work, with your data file as argument > comtac1 data The above three files are included by comtac.f module. The new tpbig is created by compiling comtac.f and linking with other modules. 2. Run make with makefile as argument. > make A lot of warning messages can be avoided by changing dimensions in tacsar.ins and comtacs.f to the same value as SPTACS dimension in newmods.f. 3. Then, set environment variable COMPTACS as "USE", and run the new tpbig. > COMPTACS=USE > tpbig DISK datafile. s -r > COMPTACS= The batch file comtac2.bat does this work with your data file as argument. > comtac2 data The original tpbig in the distribution was compiled with the following three files whose sizes are 0. comtac1.ins comtac2.ins comtac3.ins Some tips for the correct operating of compiled TACS - Some varible names should not be used; I, IA, T, ... - The integer number should not be used as a denominator; 1/2 should be 1.D0/2.D0 , ..... - Logical expression should be changed by hand; For example, SIGAP = .NOT. SIGA This code should be changed like as follows; AASIGAP = .NOT.SIGA BB IF ( SIGA .GT. 0.0 ) then BB SIGAP = 0.0 BB ELSE BB SIGAP = 1.0 BB ENDIF Other example, SIGNLC = SIGN( ERRORC ) * ( ABS( ERRORC ) .GT. DELTAI ) This code should be changed like as follows; AASIGNLC = SIGN( ERRORC ) * ( ABS( ERRORC ) .GT. DELTAI ) BB IF ( DABS( ERRORC ) .GT. DELTAI ) THEN BB SIGNLC = SIGNZ( ERRORC ) * 1.0D0 BB ELSE BB SIGNLC = 0.D0 BB ENDIF As for the AA/BB features of Compiled TACS, please refer to the following URL: http://www.jaug.gr.jp/~atp/develop-e.htm#tacs III. To add a foreign function to MODELS. 1. Edit the file fgnmod.f and add your function. Follow the instructions in the fgnmod.f 2. Run make with makefile as argument. > make IV. MINGW compiler documentation GCC-2.95.2 for Mingw -- Installation instructions ================================================= 1. Choose what packages to download: a. gcc-2.95-mingw32.zip .......... [MANDATORY] C/C++/F77/ObjC compilers b. gcc-2.95-html-docs.zip ........ [OPTIONAL] Docs in HTML format c. gcc-2.95-msvcrt-runtime.zip ... [OPTIONAL] MSVCRT instead of CRTDLL. 1. Get the mandatory package first. (1) If you're on a fast link, just get the following files: - gcc-2.95-mingw32.zip (2) For slower links, get the split files from "split" directory. - gcc-2.95-mingw32.zip.* once you have all the gcc-2.95.* files, you can combine them using the combine.bat file provided in the "split" directory, which will create a gcc-2.95-mingw32.zip file. I recommend you get the HTML documentation package as well. 2. Pre-installation: a. Decide where to install it. I usually install in "C:\GCC-2.95", but you can install *anywhere* you want, including on a ZIP/JAZ drive. All you have to do is to set PATH and optionally GCC_EXEC_PREFIX accordingly (see later). From here on, I'll use "C:\GCC-2.95" as the installation root directory. Please replace with whatever you've chosen. You can use the sample "MINGW32.BAT" I've provided in the distribution to setup the variables. DO NOT install in a directory with spaces in it (eg., C:\Program Files\Mingw). b. Make sure you DO NOT install on top of an existing installation. Either install elsewhere, or delete the old directory structure first. 3. INSTALL: You must use an "unzip" program that understands both long file names and also maintains directory structure. Pkunzip and WinZIP work just fine, and I'm sure a host of others do as well. You might have to supply "-d" option when unzipping to maintain directory structure. First create the installation directory. C:\> mkdir C:\GCC-2.95 C:\> cd C:\GCC-2.95 C:\> unzip -d C:\tmp\gcc-2.95-mingw32.zip Note that if you retrieved the "split" files, then you will have to recombine them before you try to unzip. You can use the DOS COPY trick to recombine, or use the COMBINE.BAT in this directory. 4. Setting up environment variables and such: Starting from EGCS-1.1.2 release, GCC does not require *any* environment variable to run properly. You can still set GCC_EXEC_PREFIX if you wish (useful for example to switch between multiple GCC distributions), but it's completely optional. EGCS now looks for the system includes, libraries, programs, etc relative to its installation directory. You'll still need to add the GCC-2.95 bin directory, C:\GCC-2.95\bin, to your PATH for GCC to be able to find various other tools such the linker, assembler, etc. The following is all you need for this release: C:\> PATH=C:\GCC-2.95\BIN;%PATH% Again, see the supplied MINGW32.BAT file. Those of you who use a Unix like SHELL such as bash, use "mingw32.sh" instead. Make sure you do not have any other variables set from previous version or else GCC will search incorrect places for libraries and headers. The ones that you DO NOT need anymore are: LIBRARY_PATH, C_INCLUDE_PATH, CPLUS_INCLUDE_PATH, and OBJC_INCLUDE_PATH. If you *DO* have the variable GCC_EXEC_PREFIX in your environment, just make sure it's set correctly. 5. INSTALL GCC-2.95 OPTIONAL packages following exactly the same steps. Good luck. Links: GNU Compilers : http://gcc.gnu.org/ Cygwin site : http://sourceware.cygnus.com/cygwin/ My stuff : http://www.xraylith.wisc.edu/~khan/software/gnu-win32/ Mumit Khan -- [email protected] http://www.xraylith.wisc.edu/~khan/