树莓派opencv_3.4.0.0.0.0.rar

1. 配置并更新树莓派系统 1，sudo raspi-config // 进入后打开摄像头、SSH 2，sudo apt-get update 3，sudo apt-get upgrade 4，sudo rpi-update 2. 安装OpenCV的相关工具 sudo apt-get install build-essential cmake git pkg-config 3. 安装OpenCV的图像工具包 1，sudo apt-get install libjpeg8-dev 2，sudo apt-get install libtiff5-dev 3，sudo apt-get install libjasper-dev 4，sudo apt-get install libpng12-dev 4. 安装视频I/O包 sudo apt-get install libavcodec-dev libavformat-dev libswscale-dev libv4l-dev 5.安装gtk2.0和优化函数包 1，sudo apt-get install libgtk2.0-dev 2，sudo apt-get install libatlas-base-dev gfortran 6. 下载OpenCV源码 git clone https://github.com/opencv/opencv.git 这里我使用迅雷下载 zip 文件 用 unzip 命令解压 git clone https://github.com/opencv/opencv-4.1.0.git ''' opencv建议安装3.3及以后版本吧，对以后想要深度学习，神经网络都很方便 要注意的一点是一定要先安装CUDA后安装opencv，否则不能使用GPU，很麻烦 先安装一下依赖吧，很多，还是全一点好，要比到时候报错好很多     sudo apt-get install --assume-yes libopencv-dev build-essential cmake git libgtk2.0-dev pkg-config python-dev python-numpy libdc1394-22 libdc1394-22-dev libjpeg-dev libpng12-dev libtiff5-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libxine2-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev libtbb-dev libqt4-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils unzip       sudo apt-get install build-essential cmake git       sudo apt-get install ffmpeg libopencv-dev libgtk-3-dev python-numpy python3-numpy libdc1394-22 libdc1394-22-dev libjpeg-dev libpng12-dev libtiff5-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libxine2-dev libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev libv4l-dev libtbb-dev qtbase5-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils unzip 依赖安装好后就可以去opencv官网，下载opencv3.3了 https://opencv.org/opencv-3-3.html，选择最后的The source code for all platforms can be downloaded from GitHub: zip ''' 7. 安装OpenCV // 根据下载的版本而定 1，cd opencv // 创建release文件夹 2，mkdir release // 进入release目录下 3，cd release // cmake读入所有源文件之后，自动生成makefile 4，sudo cmake -D CMAKE_BUILD_TYPE=RELEASE \ -D CMAKE_INSTALL_PREFIX=/usr/local .. // 编译, 请进入 VNC 或者直接操作树莓派 5，sudo make // 安装 6，sudo make install //更新动态链接库 7，sudo ldconfig