Mobile_sms.rar_GSM_GSM SMS_mobile_sms_发短信

// Listener.cpp - Sample application for CSerial #define STRICT #include <tchar.h> #include <windows.h> #include <stdio.h> #include <string.h> #include "Serial.h" enum { EOF_Char = 27 }; int ShowError (LONG lError, LPCTSTR lptszMessage) { // Generate a message text TCHAR tszMessage[256]; wsprintf(tszMessage,_T("%s\n(error code %d)"), lptszMessage, lError); // Display message-box and return with an error-code ::MessageBox(0,tszMessage,_T("Listener"), MB_ICONSTOP|MB_OK); return 1; } int __cdecl _tmain (int /*argc*/, char** /*argv*/) { CSerial serial; LONG lLastError = ERROR_SUCCESS; // Attempt to open the serial port (COM1) lLastError = serial.Open(_T("COM1")); if (lLastError != ERROR_SUCCESS) return ::ShowError(serial.GetLastError(), _T("Unable to open COM-port")); // Setup the serial port (9600,8N1, which is the default setting) lLastError = serial.Setup(CSerial::EBaud19200,CSerial::EData8,CSerial::EParNone,CSerial::EStop1); if (lLastError != ERROR_SUCCESS) return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port setting")); // Setup handshaking (default is no handshaking) //99 lLastError = serial.SetupHandshaking(CSerial::EHandshakeHardware); lLastError = serial.SetupHandshaking(CSerial::EHandshakeOff); if (lLastError != ERROR_SUCCESS) return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port handshaking")); // Register only for the receive event lLastError = serial.SetMask(CSerial::EEventBreak | CSerial::EEventCTS | CSerial::EEventDSR | CSerial::EEventError | CSerial::EEventRing | CSerial::EEventRLSD | CSerial::EEventRecv); if (lLastError != ERROR_SUCCESS) return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port event mask")); // Use 'non-blocking' reads, because we don't know how many bytes // will be received. This is normally the most convenient mode // (and also the default mode for reading data). lLastError = serial.SetupReadTimeouts(CSerial::EReadTimeoutNonblocking); if (lLastError != ERROR_SUCCESS) return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port read timeout.")); serial.Write("at+cmgs=27\r\n"); // Keep reading data, until an EOF (CTRL-Z) has been received bool fContinue = true; do { // Wait for an event lLastError = serial.WaitEvent(); if (lLastError != ERROR_SUCCESS) return ::ShowError(serial.GetLastError(), _T("Unable to wait for a COM-port event.")); // Save event const CSerial::EEvent eEvent = serial.GetEventType(); // Handle break event if (eEvent & CSerial::EEventBreak) { printf("\n### BREAK received ###\n"); } // Handle CTS event if (eEvent & CSerial::EEventCTS) { printf("\n### Clear to send %s ###\n", serial.GetCTS()?"on":"off"); } // Handle DSR event if (eEvent & CSerial::EEventDSR) { printf("\n### Data set ready %s ###\n", serial.GetDSR()?"on":"off"); } // Handle error event if (eEvent & CSerial::EEventError) { printf("\n### ERROR: "); switch (serial.GetError()) { case CSerial::EErrorBreak: printf("Break condition"); break; case CSerial::EErrorFrame: printf("Framing error"); break; case CSerial::EErrorIOE: printf("IO device error"); break; case CSerial::EErrorMode: printf("Unsupported mode"); break; case CSerial::EErrorOverrun: printf("Buffer overrun"); break; case CSerial::EErrorRxOver: printf("Input buffer overflow"); break; case CSerial::EErrorParity: printf("Input parity error"); break; case CSerial::EErrorTxFull: printf("Output buffer full"); break; default: printf("Unknown"); break; } printf(" ###\n"); } // Handle ring event if (eEvent & CSerial::EEventRing) { printf("\n### RING ###\n"); } // Handle RLSD/CD event if (eEvent & CSerial::EEventRLSD) { printf("\n### RLSD/CD %s ###\n", serial.GetRLSD()?"on":"off"); } // Handle data receive event if (eEvent & CSerial::EEventRecv) { // Read data, until there is nothing left DWORD dwBytesRead = 0; char szBuffer[101]; do { // Read data from the COM-port lLastError = serial.Read(szBuffer,sizeof(szBuffer)-1,&dwBytesRead); if (lLastError != ERROR_SUCCESS) return ::ShowError(serial.GetLastError(), _T("Unable to read from COM-port.")); if (dwBytesRead > 0) { // Finalize the data, so it is a valid string szBuffer[dwBytesRead] = '\0'; // Display the data printf("%s", szBuffer); // Check if EOF has been specified if (strchr(szBuffer,EOF_Char)) fContinue = false; } } while (dwBytesRead == sizeof(szBuffer)-1); } } while (fContinue); // Close the port again serial.Close(); return 0; }