基于STM8的ds18b20温度采集系统

/** @page Release_Notes Release notes for STM8S Firmware Library <h3>V1.1.1 - 06/05/2009</h3> @code General ------- + Project template updated for both STVD and RIDE toolchains + Almost peripheral examples reviewed and validated with both Cosmic and Raisonance compilers library ------- + stm8s.h: - __CONST definition added for Cosmic and Raisonance compilers - TINY definition added for Cosmic and Raisonance compilers - NEAR definition added for Raisonance compilers - CAN registers declaration updated - ADC1 registers declaration updated + stm8s_adc1.h: - IS_ADC1_BUFFER_OK macro definition updated + stm8s_beep.c: - BEEP_Init function updated - BEEP->CSR |= BEEP_CSR_BEEPEN; removed from init function + stm8s_can.c/.h: - Private variables declaration changed to volatile - CAN_DeInit function updated - CAN_Receive function updated - CAN_FilterInit funtion updated - CAN_Transmit function updated - CAN_IT_TypeDef enum updated: - CAN_IT_ERR and CAN_IT_LEC definition updated to avoid ANSI check error with Cosmic + stm8s_clk.h: - CLK_Peripheral_TypeDef enum updated: - CLK_PERIPHERAL_UART1 definition updated and conditioned by the device to use + stm8s_gpio.h: - The GPIO_Mode_TypeDef enum element definition updated: - GPIO_MODE_OUT_OD_LOW_FAST - GPIO_MODE_OUT_PP_LOW_FAST - GPIO_MODE_OUT_OD_LOW_SLOW - GPIO_MODE_OUT_PP_LOW_SLOW - GPIO_MODE_OUT_OD_HIZ_FAST - GPIO_MODE_OUT_PP_HIGH_FAST - GPIO_MODE_OUT_OD_HIZ_SLOW - GPIO_MODE_OUT_PP_HIGH_SLOW + stm8s_tim3.h: - IS_TIM3_CLEAR_FLAG_OK macro definition updated - TIM3_GetITStatus and TIM3_GetFlagStatus functions updated: - Local varaiables changed to volatile + stm8s_usart1.h: - UART1_IT_TypeDef enum description updated to give more details on the element values convention. + stm8s_usart2.h: - UART2_IT_TypeDef enum description updated to give more details on the element values convention. + stm8s_usart3.h: - UART3_IT_TypeDef enum description updated to give more details on the element values convention. + stm8s_gpio.c: - GPIO_ReadInputPin function updated + stm8s_i2c.c: - I2C_ClearFlag function description and code updated - I2C_ClearITPendingBit function description and code updated + stm8s_itc.c: - The private function ITC_GetCPUCC definition updated for Raisonance + stm8s_tim1.c: - TIM1_GetITStatus and TIM1_GetFlagStatus functions updated: - Local varaiables changed to volatile + stm8s_tim2.c: - TIM2_GetITStatus and TIM2_GetFlagStatus functions updated: - Local varaiables changed to volatile + stm8s_tim5.c: - TIM5_GetITStatus and TIM5_GetFlagStatus functions updated: - Local varaiables changed to volatile + stm8s_tim6.c: - TIM6_GetITStatus and TIM6_GetFlagStatus functions updated: - Local varaiables changed to volatile examples -------- + Almost examples were updated with both Cosmic and Raisonance compilers using STVD toolchain. - Exception is made for the following FLASH examples: - FLASH_EraseBlockOnFlashProgramMemory - FLASH_WriteEraseBlockOnDataEepromMemory - FLASH_BlockOperationOnFlashProgramMemory --> Dependency related to linkerfile edition + All examples readme.txt files were updated : - @par Directory contents section updated - @par Hardware and Software environment section updated - @par How to use it ? section updated + Mono LCD driver updated: mono_lcd.c - LCD_SendByte function updated by adding a delay (LCD_Delay(80);) after sending the last byte + Micro Sd driver updated : micro_sd.c - MSD_WriteByte function updated to support 2G SD card (type: kingston) + AWU example updated - AWU_AutoLSICalibration private function removed and replaced by u32 LSIMeasurment to measure LSI w/ either TIM1 or TIM3 depending on the used device + BEEP example updated - BEEP_AutoLSICalibration private function removed and replaced by u32 LSIMeasurment to measure LSI w/ either TIM1 or TIM3 depending on the used device - Add BEEP_Cmd function call in the example due to BEEP_Init function update. + CLK example - CLK_ClockSelection updated + SPI example - SPI_FastCommunication example renamed to SPI_FastCommunicationMicroSD project ------- + Project templates updated for STVD and RIDE toolchain - asm_functions.asm file removed from both projects STVD with Raisonance and RIDE7 - stm8s_it.c file updated to support both Cosmic and Raisonance compiler - stm8_interrupt_vector.c and stm8s_it.h files were updated to use @far instead of @near - Optimization option updated for STVD with Raisonance project - SCINAME(STM8) linker option added for STVD with Raisonance project - STM8_OB.asm file added within RIDE7 project to configure option bytes @endcode <h3>V1.1.0 - 02/27/2009</h3> @code General ------- + The STM8S Firmware library supports now STM8S Performance line (STM8S208 and STM8S207 sub-families), Access line (STM8S105 and STM8S103 sub-families) and STM8S903. + RN0022 "STM8S firmware library Release note" document merged in "stm8s_fwlib_um.chm" user manual. + "stm8s_fwlib_um.chm" user manual: structure and content enhanced to provide complete information about the library and how it can be used. + List of peripheral examples reviewed: redundant examples were removed (same example provided for two or more peripherals) and others were added library ------- + stm8_map.h renamed to stm8.hand the following modification were performed: - add the library configuration section - add definition of the used compiler - add definition of the library supported devices - add definition of the standard peripheral driver use - add definition of pointer declaration for FLASH routines - Update peripheral registers and bit definition to support STM8S103 & STM8S903 devices: TIM5 & TIM6 registers and structures added - OPT base address updated - Peripheral declaration conditioned by supported devices - add macros added for interrupts and bits handling (content of legacy stm8s_macro.h file) + stm8s_macro.h file removed and its content is copied to stm8s.h file + stm8s_conf.h: - Include stm8.h file instead of stm8s_type.h and stm8s_macro.h files - #define DEBUG removed - Cosmic section definition removed - HSE value definition conditioned by supported devices - CAN definition added - TIM5 & TIM6 definition added - Peripheral definition conditioned by supported devices - add section for peripheral header file inclusion (content of legacy stm8s_lib.h file) + stm8s_lib.h file removed and its content is copied to stm8s_conf.h file + All peripheral drivers (tm8s_ppp.c) - '#include "stm8s_map.h"' replaced by '#include "stm8s.h"' - Cosmic sections removed, except