Copernicus II Hookup Guide
Contributors:
Toni_K
Toni_K 
Resources and Going Further
Now that you've gotten your module hooked up and can collect gps data from it, it's time to start integrating the module into your projects. Think about adding in gps navigation to an autonomous robot or creating a data logger for your car to track gas usage in different areas. Let us know what kind of cool projects you come up with, and leave us any feedback you might have on the tutorial. Check the files below for additional resources.
Resources
- Breakout Board Schematic (PDF)
- Breakout Board Eagle Files (ZIP)
- Copernicus II Datasheet
- GPSStudio Users Guide
- SparkFun GPS Tracking Tutorial
- GPS Tutorial by Michael Simpson
- Trimble Studio & Support Tools
- GitHub - Design files and archived library
Need some inspiration for your next project? Check out some of these related tutorials:
Arduino Weather Shield Hookup Guide V12
Read humidity, pressure and luminosity quickly and easily. Add wind speed, direction and rain gauge for full weather station capabilities.
Qwiic GPS Clock
What time is it? Time for you to... Qwiic-ly build a GPS clock and output it to a display! This project provides you with the current date and time using GPS satellites. Read the date and time as a digital or analog clock. Or even configure the clock for military, your time zone, or automatically adjust the time for daylight savings time!
MicroMod Update Tool Hookup Guide
Follow this guide to learn how to use the MicroMod Update Tool to interact directly with the UART on the MicroMod Asset Tracker's SARA-R5. Using this board you can talk directly to the module using u-blox's m-center software as well as update the firmware using EasyFlash.
GeoFence Treasure Hunt With Artemis Global Tracker
Follow along with an engineering student as he creates a distance-based game using the Artemis Global Tracker!