NEW VERSION 3.2.1.5 - MARS 2022
ECG Logger is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode.
The ECG Logger project is aimed for providing a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with two companion boards for the SD card mass-storage and the instrumentation differential amplifier. It can help monitoring arrhythmia syndromes such as bradycardia, tachycardia, extra-systoles or pause.
WARNING:
In no case it can be use to replace a professional medical examination.
**************************************************************************************
see also :
ECG Logger hardware : https://sourceforge.net/p/ecg-logger
Features
- Compatible with Windows 7 & 10
- Holter device recording configuration and clock setup
- Basic patient's database management
- ECG data upload from SDC
- Live ECG display with data recording function
- ECG signal plot on normalized grid
- Heart rate variability processing (HRV)
- R-peak detection and arrythmia classification
- Arrythmia : Bracardia, Tachycardio, Extrasystoles and Pauses
- Detection of ECG artifacts
- Heart Rate Variability chart (HRV)
- Poincaré views
- Preview and print of ECG signal and statistics
- Data export in EDF/BDF formats
- Interface in English and French
- Firmware update from application
- ECG navigation by arryhtmia types or time position
- IMPORTANT: runs only with the "ECG Logger" Holter device
- Require "ECG Logger" Holter device firmware version 3.1.5
- Portable application available since v2.0 (runs on USB /ext. drive)
Project Samples
