WAN Full Form Last Updated : 26 Jul, 2023 Comments Improve Suggest changes Like Article Like Report A WAN (Wide Area Network) is to connect multiple smaller Local Area Networks (LANs). It is a computer network designed. WANs can help in communication, the sharing of information, and much more between systems or devices from around the world through a WAN provider. What is a WAN?WAN stands for Wide Area Network. It is a computer network that covers a large geographical area consisting of two or more LANs or MANs. These networks are established with leased telecommunication circuits, in which two sides which are connected have routers that connect the LAN of both sides together in a network to facilitate communication. WAN Full FormHistory of WANThe roots of WAN are connected to the U.S Department of defense which developed ARPANET to let researchers communicate and share computer resources remotely. The connection can be circuit-switched telephone lines, radio wave transmission or optical fiber transmission. It is used to exchange data with users all over the world, they can be client, employee, buyer, seller, student, etc. WAN has the ability to transmit data, image, audio data, video data over large distances. What is a WAN Router?An organisation can access a carrier network by using a WAN router, sometimes referred to as an edge router or border router, which routes data packets between WAN locations. Packet over SONET/SDH (PoS), Multiprotocol Label Switching (MPLS), ATM, and Frame Relay are many WAN protocol were developed. WAN NetworkWhat is Software-Defined WAN (SD-WAN)?It is a technique for making WAN architectures easier to construct, run, and administer is software-defined WAN (SD-WAN). It relies on virtualization, overlay networks, application-level policies and onsite SD-WAN devices and software platforms.SD-WAN improves the efficiency of data transfer across a WAN by shifting traffic to less expensive network links to replace more expensive leased or MPLS lines.Types of WAN TechnologiesThere are mainly two technologies that are used in the WAN network design. Circuit switching: Circuit switched networks operate on the virtual connection principle, which dictates that all messages will take the same way and that resources along this path are set aside for this connection. Packet Switching: The size of a packet in a packet switched network is dictated by the outgoing link, and these packets may follow different route. These packets are ready to collected and reassembled at the destination.TCP/IP protocol suite: TCP/IP is a protocol suite of foundational of the internet protocols used to interconnect devices on Internet and other computers networks or device network. Full form of TCP/IP is Transmission Control Protocol/Internet Protocol.Router: A router is a networking device which transfers data packets between device networks and also we can say it is used to interconnect LANs to form a wide area network (WAN).Packet over SONET/SDH (PoS): Packet over SONET and SDH is a communication protocol used for WAN transport. When using optical fiber and SONET or SDH communication protocol used to defines how point-to-point links communicate.Multiprotocol Label Switching (MPLS): Multi Protocol Label Switching (MPLS) is an IP packet routing technique and also a network routing optimization technique that routes IP packet through paths via labels instead of looking at complex routing tables of routers. Characteristics of WANBroader Reach: The reach of WAN in terms coverage of geographical area is very high which can be a region, country or the world itself.Higher Capacity: The capacity of WAN in terms of number of LANs or WANs connected in a network is very high, which results in connection of large number of user over different location all around the globe.Use of Public Carrier: WAN uses telephone network, cabled system, satellites etc for connection and transmission purpose which are easily available.Resource Sharing: WAN enables its users to share data and information over large area. Computer resources can be accessed remotely which makes transmission and exchange of data very easy. Advantages of WANIt covers large geographical area which enhances the reach of organisation to transmit data quickly and cheaply.The data can be stored in centralised manner because of remote access to data provided by WAN.The travel charges that are needed to cover the geographical area of work can be minimised.WAN enables a user or organisation to connect with the world very easily and allows to exchange data and do business at global level.Disadvantages of WANTraffic congestion in Wide Area Network is very high.The fault tolerance ability of WAN is very less.Noise and error are present in large amount due to multiple connection point.The data transfer rate is slow in comparison to LAN because of large distances and high number of connected system within the network. Comment More infoAdvertise with us Next Article Introduction of Internetworking ypsjnv2013 Follow Improve Article Tags : Computer Science Fundamentals Full Form Similar Reads Computer Network Tutorial A Computer Network is a system where two or more devices are linked together to share data, resources and information. These networks can range from simple setups, like connecting two devices in your home, to massive global systems, like the Internet. Below are the main components of a computer netw 7 min read Basics of Computer NetworkBasics of Computer NetworkingA computer network is a collection of interconnected devices that share resources and information. These devices can include computers, servers, printers, and other hardware. Networks allow for the efficient exchange of data, enabling various applications such as email, file sharing, and internet br 14 min read Introduction to basic Networking TerminologyFor a specific purpose if things are connected together, are referred to as a NETWORK. A network can be of many types, like a telephone network, television network, computer network, or even a people network. Similarly, a COMPUTER NETWORK is also a kind of setup, where it connects two or more device 4 min read Goals of NetworksComputer Network means an interconnection of autonomous (standalone) computers for information exchange. The connecting media could be a copper wire, optical fiber, microwave, or satellite. Networking Elements - The computer network includes the following networking elements: At least two computers 4 min read Basic Characteristics of Computer NetworksComputer networks allow multiple devices to connect and share resources like files, printers, and internet access. Key characteristics include the network's size (like local or wide area), the way data is transferred (wired or wireless), and the network's layout (such as star or mesh). These feature 5 min read Challenges of Computer NetworkIn the age of Internet where everyone loves to work with their computers and smart phones it is impossible to think any work without networking. With advancement of technology use of computer networking is increasing rapidly. In general if we will see, we can feel also how important networking is th 4 min read Physical Components of Computer NetworkThe physical components of a computer network include hardware devices and media that enable connectivity and data exchange between devices. The server, client, peer, transmission media, and connecting devices make up the hardware components. A computer network is made up of several computers connec 6 min read Network Hardware and SoftwareTypes of Computer NetworksA computer network is a system that connects many independent computers to share information (data) and resources. The integration of computers and other different devices allows users to communicate more easily. It is a collection of two or more computer systems that are linked together. A network 11 min read LAN Full Form - Local area networkA Local area network (LAN) is a network that is used to link devices in a single office, building, or campus of up to a short distance. LAN is restricted in size. In LAN networks internet speed is from 10 Mbps to 100 Mbps (But now much higher speeds can be achieved). The most common topologies used 10 min read How to Set Up a LAN Network?LAN (Local Area Network) is a data communication network that locally connects network devices such as workstations, servers, routers, etc. to share the resources within a small area such as a building or campus. Physical or wireless connections are set up between workstations to share the resources 4 min read MAN Full Form in Computer NetworkingA Metropolitan Area Network (MAN) is a type of computer network that spans over a metropolitan area, typically a city. It provides high-speed data communication services such as video, audio, and data transfer between multiple LANs (Local Area Networks) and WANs (Wide Area Networks). The main purpos 9 min read MAN Full FormMAN stands for Metropolitan Area Network and it is made by connecting multiple LANs. MAN covers a geographical area which is known as the metropolitan area. It serves as a connection that is larger than LAN(Local Area Network) but smaller than WAN(Wide Area Network). It generally covers the area of 5 min read WAN Full FormA WAN (Wide Area Network) is to connect multiple smaller Local Area Networks (LANs). It is a computer network designed. WANs can help in communication, the sharing of information, and much more between systems or devices from around the world through a WAN provider. What is a WAN?WAN stands for Wide 5 min read Introduction of InternetworkingInternetworking is composed of 2 words, inter and networking, which implies an association between totally different nodes or segments. This connection area unit is established through intercessor devices, such as routers or gateways. The first term for associate degree internetwork was Catenet. Thi 8 min read Difference between Internet, Intranet and ExtranetNetworks are crucial in today’s globalized world because they allow the acquisition, exchange, and organization of knowledge. Of all the first order networks the Internet, Intranet, and Extranet are commonly utilized for various applications. Every network type meets specific roles that are required 5 min read Protocol Hierarchies in Computer NetworkA Protocol Hierarchy is a fixed set of rules and conventions that govern the communication between two or more computers. The hierarchical structure allows for modular design, interoperability, and ease of implementation in computer networks. What is Protocol?A protocol is simply defined as a set of 3 min read Network Devices (Hub, Repeater, Bridge, Switch, Router, Gateways and Brouter)Network devices are physical devices that allow hardware on a computer network to communicate and interact with each other. Network devices like hubs, repeaters, bridges, switches, routers, gateways, and brouter help manage and direct data flow in a network. They ensure efficient communication betwe 9 min read Introduction of a RouterNetwork devices are physical devices that allow hardware on a computer network to communicate and interact with one another. For example Repeater, Hub, Bridge, Switch, Routers, Gateway, Router, and NIC, etc. What is a Router?A Router is a networking device that forwards data packets between computer 12 min read Introduction of GatewaysA gateway is a network connectivity device that connects two different configuration networks. Gateways are also known as protocol converters, because they play an important role in converting protocols supported by traffic on different networks. As a result, it allows smooth communication between t 5 min read What is a Network Switch and How Does it Work?The Switch is a network device that is used to segment the networks into different subnetworks called subnets or LAN segments. It is responsible for filtering and forwarding the packets between LAN segments based on MAC address. Switches have many ports, and when data arrives at any port, the destin 9 min read Network TopologyTypes of Network TopologyNetwork topology refers to the arrangement of different elements like nodes, links, or devices in a computer network. Common types of network topology include bus, star, ring, mesh, and tree topologies, each with its advantages and disadvantages. In this article, we will discuss different types of n 12 min read Difference between Physical and Logical TopologyA Physical and Logical topologies are important concepts that govern the formation and operation of networks. In this article we will see differences between both topologies, and troubleshooting network infrastructure. What is Physical Topology?Physical topology indicates the arrangement of differen 5 min read OSI ModelWhat is OSI Model? - Layers of OSI ModelThe OSI (Open Systems Interconnection) Model is a set of rules that explains how different computer systems communicate over a network. OSI Model was developed by the International Organization for Standardization (ISO). The OSI Model consists of 7 layers and each layer has specific functions and re 13 min read Physical Layer in OSI ModelThe physical Layer is the bottom-most layer in the Open System Interconnection (OSI) Model which is a physical and electrical representation of the system. It consists of various network components such as power plugs, connectors, receivers, cable types, etc. The physical layer sends data bits from 4 min read Data Link Layer in OSI ModelThe data link layer is the second layer from the bottom in the OSI (Open System Interconnection) network architecture model. It is responsible for the node-to-node delivery of data within the same local network. Its major role is to ensure error-free transmission of information. DLL is also responsi 5 min read Session Layer in OSI modelThe Session Layer is the 5th layer in the Open System Interconnection (OSI) model which plays an important role in controlling the dialogues (connections) between computers. This layer is responsible for setting up, coordinating, and terminating conversations, exchanges, and dialogues between the ap 6 min read Presentation Layer in OSI modelPresentation Layer is the 6th layer in the Open System Interconnection (OSI) model. This layer is also known as Translation layer, as this layer serves as a data translator for the network. The data which this layer receives from the Application Layer is extracted and manipulated here as per the req 4 min read Application Layer in OSI ModelThe Application Layer of OSI (Open System Interconnection) model, is the top layer in this model and takes care of network communication. The application layer provides the functionality to send and receive data from users. It acts as the interface between the user and the application. The applicati 5 min read ProtocolsProtocol and Standard in Computer NetworksProtocols and standards are important in computer networks. They are like the rules and guidelines that allow different devices and systems to communicate and work together smoothly. Protocols define how data is sent, received, and processed, while standards ensure that various technologies are comp 9 min read Examples of Data Link Layer ProtocolsData Link Layer protocols are generally responsible for ensuring and confirming that the bits and bytes received are identical to the bits and bytes being transferred. It is a set of specifications that are used for the implementation of the data link layer just above the physical layer of the Open 5 min read TCP/IP ModelTCP/IP ModelThe TCP/IP model (Transmission Control Protocol/Internet Protocol) is a four-layer networking framework that enables reliable communication between devices over interconnected networks. It provides a standardized set of protocols for transmitting data across interconnected networks, ensuring efficie 7 min read TCP/IP Ports and Its ApplicationsA port is like a logical address for different types of internet communication. Each type of service (like websites or email) has its port where data is sent and received. You can think of it as a mailbox where messages are delivered. When data comes in, it goes to the right port (mailbox), and the 7 min read What is TCP (Transmission Control Protocol)?Transmission Control Protocol (TCP) is a connection-oriented protocol for communications that helps in the exchange of messages between different devices over a network. It is one of the main protocols of the TCP/IP suite. In OSI model, it operates at the transport layer(Layer 4). It lies between th 5 min read TCP 3-Way Handshake ProcessThe TCP 3-Way Handshake is a fundamental process that establishes a reliable connection between two devices over a TCP/IP network. It involves three steps: SYN (Synchronize), SYN-ACK (Synchronize-Acknowledge), and ACK (Acknowledge). During the handshake, the client and server exchange initial sequen 6 min read Services and Segment structure in TCPThe Transmission Control Protocol is the most common transport layer protocol. It works together with IP and provides a reliable transport service between processes using the network layer service provided by the IP protocol. The various services provided by the TCP to the application layer are as f 5 min read TCP Connection EstablishmentTCP (Transmission Control Protocol) is a core internet protocol that ensures reliable, ordered, and error-checked delivery of data between computers. It establishes a connection using a three-way handshake before data transfer begins, allowing both devices to synchronize and agree on communication p 4 min read TCP Connection TerminationIn TCP 3-way Handshake Process we studied that how connections are established between client and server in Transmission Control Protocol (TCP) using SYN bit segments. In this article, we will study how TCP close connection between Client and Server. Here we will also need to send bit segments to a 5 min read TCP TimersTCP uses several timers to ensure that excessive delays are not encountered during communications. Several of these timers are elegant, handling problems that are not immediately obvious at first analysis. Each of the timers used by TCP is examined in the following sections, which reveal its role in 3 min read Fast Recovery Technique For Loss Recovery in TCPWhen the RTO timer expires but an ACK is not received, the sender confirms that the packet is lost due to congestion at intermediary devices. Now sender has to tackle this congestion state carefully. Fast Recovery is the packet loss recovery technique. Recovery means becoming inactive and not transm 4 min read Difference Between OSI Model and TCP/IP ModelData communication is a process or act in which we can send or receive data. Understanding the fundamental structures of networking is crucial for anyone working with computer systems and communication. For data communication two models are available, the OSI (Open Systems Interconnection) Model, an 5 min read Medium Access ControlMAC Full Form - Media Access ControlMAC refers to Media Access Control, which is an important issue in network technology. In simple words, MAC is a series of rules through which devices can transfer data among them in a network. When a device is connected to a network, it obtains a unique MAC address. It identifies a device connected 5 min read Channel Allocation Problem in Computer NetworkThe Channel Allocation Problem arises in communication networks when multiple devices need to share a limited number of communication channels. The goal is to efficiently allocate channels to devices while avoiding interference, reducing congestion, and optimizing network performance. Channel alloca 4 min read Multiple Access Protocols in Computer NetworkMultiple Access Protocols are methods used in computer networks to control how data is transmitted when multiple devices are trying to communicate over the same network. These protocols ensure that data packets are sent and received efficiently, without collisions or interference. They help manage t 9 min read Carrier Sense Multiple Access (CSMA)Carrier Sense Multiple Access (CSMA) is a method used in computer networks to manage how devices share a communication channel to transfer the data between two devices. In this protocol, each device first sense the channel before sending the data. If the channel is busy, the device waits until it is 9 min read Collision Detection in CSMA/CDCSMA/CD (Carrier Sense Multiple Access/ Collision Detection) is a media access control method that was widely used in Early Ethernet technology/LANs when there used to be shared Bus Topology and each node ( Computers) was connected by Coaxial Cables. Nowadays Ethernet is Full Duplex and Topology is 7 min read Controlled Access Protocols in Computer NetworkControlled Access Protocols (CAPs) in computer networks control how data packets are sent over a common communication medium. These protocols ensure that data is transmitted efficiently, without collisions, and with little interference from other data transmissions. In this article, we will discuss 6 min read SLIDING WINDOW PROTOCOLSStop and Wait ARQStop and Wait ARQ is a Sliding Window Protocol method used for the reliable delivery of data frames. The stop-and-wait ARQ is used for noisy channels or links to handle flow and error control between sender and receiver. The Stop and Wait ARQ protocol sends a data frame and then waits for an acknowl 9 min read Sliding Window Protocol | Set 3 (Selective Repeat)Prerequisite : Sliding Window Protocol - Set 1 (Sender Side), Set 2 (Receiver Side) Why Selective Repeat Protocol? The go-back-n protocol works well if errors are less, but if the line is poor it wastes a lot of bandwidth on retransmitted frames. An alternative strategy, the selective repeat protoco 3 min read Piggybacking in Computer NetworksPiggybacking is the technique of delaying outgoing acknowledgment temporarily and attaching it to the next data packet. When a data frame arrives, the receiver waits and does not send the control frame (acknowledgment) back immediately. The receiver waits until its network layer moves to the next da 5 min read IP AddressingWhat is IPv4?IP stands for Internet Protocol version v4 stands for Version Four (IPv4), is the most widely used system for identifying devices on a network. It uses a set of four numbers, separated by periods (like 192.168.0.1), to give each device a unique address. This address helps data find its way from one 5 min read What is IPv6?The most common version of the Internet Protocol currently is IPv6. The well-known IPv6 protocol is being used and deployed more often, especially in mobile phone markets. IP address determines who and where you are in the network of billions of digital devices that are connected to the Internet. It 5 min read Introduction of Classful IP AddressingAn IP address is an address that has information about how to reach a specific host, especially outside the LAN. An IP address is a 32-bit unique address having an address space of 232.Classful IP addressing is a way of organizing and managing IP addresses, which are used to identify devices on a ne 11 min read Classless Addressing in IP AddressingThe Network address identifies a network on the internet. Using this, we can find a range of addresses in the network and total possible number of hosts in the network. Mask is a 32-bit binary number that gives the network address in the address block when AND operation is bitwise applied on the mas 7 min read Classful vs Classless AddressingClassful and Classless addressing are methods used in networking to manage IP addresses. Classful addressing divides IP addresses into fixed classes (A, B, C, D, E), each with predefined ranges. In contrast, classless addressing, also known as CIDR (Classless Inter-Domain Routing), offers more flexi 6 min read Classless Inter Domain Routing (CIDR)Classless Inter-Domain Routing (CIDR) is a method of IP address allocation and IP routing that allows for more efficient use of IP addresses. CIDR is based on the idea that IP addresses can be allocated and routed based on their network prefix rather than their class, which was the traditional way o 6 min read Supernetting in Network LayerSupernetting is the opposite of Subnetting. In subnetting, a single big network is divided into multiple smaller subnetworks. In Supernetting, multiple networks are combined into a bigger network termed a Supernetwork or Supernet. In this article, we'll explore the purpose and advantages of supernet 4 min read Introduction To SubnettingSubnetting is the process of dividing a large network into smaller networks called "subnets." Subnets provide each group of devices with their own space to communicate, which ultimately helps the network to work easily. This also boosts security and makes it easier to manage the network, as each sub 8 min read Difference between Subnetting and SupernettingSubnetting is the procedure to divide the network into sub-networks or small networks, these smaller networks are known as subnets. The subnet is also defined as an internal address made up of a combination of a small network and host segments. In a subnet, a few bits from the host portion are used 4 min read Like