Lawrence Kelley, BSME

As part of my ongoing volunteer service commitment / adult mechanical-engineering continuing education, contributed GS-Domain-related fastener article to non-profit, globally-known web site. Also attended Wikipedia's 10th Anniversary Party (NYC-sub-group) Meet-Up / Birthday Bash at NYU's Tisch ITP Building on January 15th, 2011. WP event photo posted on Yahoo!'s Flickr: ** http://flic.kr/p/9ukdp7 **.

Published to GS website between April 2008 - January 2011: As responsible Domain Engineer for "Engineering Service" areas, upgraded *Electrical Engineering* Services area to a *searchable* web form (developed form w/ checkbox-prompts) on GS web site, and wrote area descriptions and help content for "prompts" (checkbox-help). Worked with Sr. GS Domain Engineer and Electrical Engineering PhD, Abraham Michelen.

Published to GS website between April 2008 - January 2011: As responsible Domain Engineer, added Mechanical Engineering Services area to GS web site and internal taxonomy, wrote area description, and classified appropriate companies and organizations to new area.

Per request from Hudson-Mohawk's American Society of Mechanical Engineers Executive Committee and section chair, I wrote this tribute piece soonafter ASME-global's Honorary Membership was awarded to Ms. Fitzroy. Also leveraged same blog-piece for inclusion on my paying-employer's web site, GlobalSpec's Conference Room Four (CR4).

2008 - 2010: Worked with editorial staff, responded to global readers, and submitted blog pieces ~bi-weekly for GlobalSpec's "Conference Room Four (CR4)" Engineers' Forum. Was a Mechanical Engineering & Technology Blogger. Engineering, software, sustainability and other topics. Best blog piece received over 4,000 views.

Eric Kathe was primary author, lab manager and an adjunct professor in the mechanical engineering department at Union College (Schenectady, New York). I worked with senior fatigue laboratory engineer Jack Keating and hydraulic-hammer technicians to perform testing that factored into Dr. Kathe's publication and presentation in Florida. I investigated function and then produced a colorized AutoCAD drawing to demonstrate hydraulic flow in our lab's hammer, with my work - and that of my colleagues… Show more

Eric Kathe was primary author, lab manager and an adjunct professor in the mechanical engineering department at Union College (Schenectady, New York). I worked with senior fatigue laboratory engineer Jack Keating and hydraulic-hammer technicians to perform testing that factored into Dr. Kathe's publication and presentation in Florida. I investigated function and then produced a colorized AutoCAD drawing to demonstrate hydraulic flow in our lab's hammer, with my work - and that of my colleagues - used by Dr. Kathe at his 2005 Destin, Florida symposium. (LK NOTE SEPT 2012: BEFORE RECENT SAVIAC.ORG WEBSITE CHANGE, FROM 2005 TO 2011, THIS PDF DOCUMENT WAS POSTED PUBLICLY ON THIS INTERNET IN A WEB ARCHIVE located at http://www.saviac.org/76th_Symposium/Abstracts%202005.pdf. - Larry Show less

*** As of time of this writing (March 2011), freelance article I wrote has been running / earning revenue for RIA - w/ high-quality robotics-industry industrial advertisers - for over (5) years. ***

I telephone interviewed key industry players, including an engineering manager from Fanuc Robotics America, to write article (see piece for names of persons I spoke with).

RIA is an important Ann Arbor, Michigan based trade organization and respected robotics-industry publisher… Show more

*** As of time of this writing (March 2011), freelance article I wrote has been running / earning revenue for RIA - w/ high-quality robotics-industry industrial advertisers - for over (5) years. ***

I telephone interviewed key industry players, including an engineering manager from Fanuc Robotics America, to write article (see piece for names of persons I spoke with).

RIA is an important Ann Arbor, Michigan based trade organization and respected robotics-industry publisher. Article also ran in RIA's hard-copy trade magazine as well.

The RIA trade organization's web site is viewed by the global engineering community that includes engineers at automobile manufacturing plants, as well as engineers working in the food distribution industry. Show less

Using Applied Robotic's GoldMine contact management software, coordinated with in-house web publisher (she used MS FrontPage), regional sales managers and their report, marketing analyst (Connie Schin), and ARI's VP, and revived defunct hardcopy version, creating first *electronic* version of Applied Robotics all-products newsletter.

Sent monthly email blast for ~1 year, promoting existing and newly-acquired laboratory automation products I technically-supported, inventory-managed, and… Show more

Using Applied Robotic's GoldMine contact management software, coordinated with in-house web publisher (she used MS FrontPage), regional sales managers and their report, marketing analyst (Connie Schin), and ARI's VP, and revived defunct hardcopy version, creating first *electronic* version of Applied Robotics all-products newsletter.

Sent monthly email blast for ~1 year, promoting existing and newly-acquired laboratory automation products I technically-supported, inventory-managed, and whose sales-figures I was responsible for, including CRS Robotics' new Serial Servo Gripper (SSG), Tecnomors' Pneumatic Gripper product line, and STI robotic-cell Light-Curtain products. Show less

*** As of time of this writing (March 2011), tech-notes I did testing for and authored have been generating revenue for SIXNET and posted for over (11) years on SIXNET's web site. ***

I had potential VT-MODEM customers that were unsure send me their PLCs so that I could demonstrate proof-of-compatibility.

Performed compatibility / configuration testing at SIXNET's Clifton Park office and created Windows configuration files. I generated several *new* technical notes, as well as… Show more

*** As of time of this writing (March 2011), tech-notes I did testing for and authored have been generating revenue for SIXNET and posted for over (11) years on SIXNET's web site. ***

I had potential VT-MODEM customers that were unsure send me their PLCs so that I could demonstrate proof-of-compatibility.

Performed compatibility / configuration testing at SIXNET's Clifton Park office and created Windows configuration files. I generated several *new* technical notes, as well as improved existing ones. Makes I personally worked with included Allen-Bradley, OMRON, Modicon, Telemechanique, Mitsubishi, Modicon, Siemens, and Giddings and Lewis. Show less

Web site publication date is approximate. Worked with RPI Mechanical Engineering graduate / Craftech Industries Vice President (one of my direct-reports) Irving "Skip" Gerard to obtain testing data for catalog / web site from Plastics Technology Laboratories (Pittsfield, MA). Provided hardware samples and reviewed data. Coordinated with Graphics Designer for hardcopy / web publishing. Data have been Internet-published for over (~14) years as of time of this writing.