Scribd
Upload
350 views2 pages

Clonezilla Source To Dest

The document provides steps for cloning a disk to a remote disk using Clonezilla. It begins by booting the Clonezilla CD and selecting Disk to Remote Disk. It then instructs to select the source drive to copy from and write down the IP address assigned to the source via DHCP. The target summary instructs to drop to the terminal, switch to root user, configure networking using ocs-live-netcfg, and run ocs-onthefly to copy the source disk to the target disk using the IP address and device names.

Uploaded by

Raja Subramanian
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
350 views2 pages

Clonezilla Source To Dest

The document provides steps for cloning a disk to a remote disk using Clonezilla. It begins by booting the Clonezilla CD and selecting Disk to Remote Disk. It then instructs to select the source drive to copy from and write down the IP address assigned to the source via DHCP. The target summary instructs to drop to the terminal, switch to root user, configure networking using ocs-live-netcfg, and run ocs-onthefly to copy the source disk to the target disk using the IP address and device names.

Uploaded by

Raja Subramanian
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Source: Start the Clonezilla CD. Select Disk to Remote Disk and accept all prompts.

As your progress through the steps select the drive you wish to copy to the target and write down the IP address assigned via DHCP Steps:Insert clonezilla cd or Bootable USB

Select Boot device as USB

Select Othermodes of clonezilla

Clonezilla live (To RAM.Boot media can be removed later)

Language-default

Key map default

Select start clonezilla to start clonezilla

Device to device work directly from a disk or partition to a disk or partition

. Select beginner mode

Disk to remote disk

Select dhcp or static ip address

Target: Start the Clonezilla CD. Drop to the terminal! (None of the menus will be of help) Type the following commands: sudo su (this switches you to the root user) ocs-live-netcfg (script which will configure the network card select DHCP if you did so on the server, you DO NOT need to remember the address assigned here) ocs-onthefly -s 192.168.1.2 -t sda (Replace 192.168.1.2 with the IP address you wrote down which was assigned to the source machine. Replace sda with the device name listed in /dev for your the hard drive that you want the source disk to be copied to)

You might also like