Scribd
Upload
193 views1 page

INSPECTION CERTIFICATE (3.1) - Chemical Analysis TEST REPORT (2.2) - Mechanical Properties

This inspection certificate summarizes the chemical analysis and mechanical properties testing of 18 kg of ESAB OK AristoRod 89 1.2mm welding wire. The chemical composition was tested and found to meet the EN 10204 - 3.1 standard. Mechanical properties including tensile strength, impact temperature, and hardness were also tested and found to meet the EN 10204 - 2.2 standard. The wire is classified under EN ISO 16834-A and SFA/AWS A5.28 standards.

Uploaded by

mustafagores
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
193 views1 page

INSPECTION CERTIFICATE (3.1) - Chemical Analysis TEST REPORT (2.2) - Mechanical Properties

This inspection certificate summarizes the chemical analysis and mechanical properties testing of 18 kg of ESAB OK AristoRod 89 1.2mm welding wire. The chemical composition was tested and found to meet the EN 10204 - 3.1 standard. Mechanical properties including tensile strength, impact temperature, and hardness were also tested and found to meet the EN 10204 - 2.2 standard. The wire is classified under EN ISO 16834-A and SFA/AWS A5.28 standards.

Uploaded by

mustafagores
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION CERTIFICATE (3.1) - Chemical analysis TEST REPORT (2.

2) - Mechanical properties

Date:

2010-11-11 Muster Marko Schoder NA Receiver of certificate

Certificate number: Your order: Your reference: Your fax number: Your e-mail: -

EC21785064 rev. 0

Our order: Our reference: Customer number: Customer order date:


Invoice address Palfinger Europe GmbH A-5211Friedburg Kappellenstrae 18

Delivery address Palfinger Europe GmbH A-5211Friedburg Kappellenstrae 18

DELIVERY PRODUCT
Brand: Description: Item number:

Lot number:

PV010246980B

Quantity: 18 KG

CHEMICAL COMPOSITION
ESAB OK AristoRod 89 1.2mm 18kg 1B96126910 G Mn4Ni2CrMo G89 4 M Mn4Ni2CrMo ER120S-G Actual results acc to EN 10204 - 3.1 Wire/strip Auxiliary: 0.08% C 0.80% Si 1.75% Mn 0.010% P 0.003% S 0.41% Cr 2.22% Ni 0.53% Mo 0.138% Cu 0.05% Ti 0.01% V 0.011% Al Zr < 0.01%

CLASSIFICATIONS
EN ISO 16834-A EN ISO 16834-A SFA/AWS A5.28

MECHANICAL PROPERTIES
Typical data acc to EN 10204 - 2.2 Standard: Auxiliary: Condition: TENSILE ReL 890 MPa IMPACT Temp -40 C Rm 940 MPa KV 47 J EN M21

A4-A5 15 %

COMMENTS

Product supplied under a QA Programme fulfilling the EN ISO 9001 standard. This certificate is produced electronically and is valid without signature. Please refer any queries to: ESAB GmbH, Beethovenstrae 135, D-42655 Solingen/Tel.: 0212/298-0/Fax: 0212-298-218/e-mail: [email protected]

Validation - Chemical Analysis Josef Mysak Quality Manager

Validation - Others Per ke Pettersson

Product Manager

You might also like