Scribd
Upload
1K views13 pages

Relay Testing Report: Pirana Station

The document reports the results of testing REL 511 relays on the Pirana Vasana feeder line on October 16, 2000. It includes parameters of the line and relay settings for Zones I-III and V. It also provides the calculations used to determine fault locations and voltage percentages for different fault types within each zone. Test results are presented to validate the relay settings.

Uploaded by

mahesh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
1K views13 pages

Relay Testing Report: Pirana Station

The document reports the results of testing REL 511 relays on the Pirana Vasana feeder line on October 16, 2000. It includes parameters of the line and relay settings for Zones I-III and V. It also provides the calculations used to determine fault locations and voltage percentages for different fault types within each zone. Test results are presented to validate the relay settings.

Uploaded by

mahesh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 13

TESTING OF REL 511 RELAYS

STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS FAULT LOCATOR SETTING 1 2 3 4 5 6 7 LINE LENGTH POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 LINE IMPEDANCE Z LINE ANGLE 4.000 0.610 1.394 1.830 4.182 1.522 66.400 PIRANA VASANA 16.10.2000

ZFB TEST KIT CALCULATIONS TEST KIT DETAILS Z BOX IS ( R4 X3 ) = CTR = 5 2.366

FAULT LOCATOR CALCULATION PERCENTAGE OF LINE AT WHICH FAULT IS INJECTED = COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 0.667 80%

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*%L*100/(Z BOX * CTR) = 17.1%

% OF VOLTAGE FOR P-P FAULTS = 2*Z1*%L/(Z BOX * CTR) 20.6%

FAULT LOCATOR TEST RESULTS

%V RN YN BN 17.1%

DIST. EXPT 3.20

(kM)

DIST. DISPLAYED (kM)

RY YB RB 20.6% 3.20

TESTING OF REL 511 RELAYS


STATION NAME FEEDER NAME DATE OF TESTING PIRANA VASANA 16.10.2000

REACTIVE REACH Z1 EXPT R-E Y-E B-E R-Y Y-B B-R 6.7% 7.3% OPTD 23 23 23 21 21 21 13.4% 13.4% EXPT Z2 OPTD 39 39 39 39 39 39 17.9% 17.1% EXPT Z3 OPTD 51 51 51 52 52 52 21.5% 17.9% EXPT Z5 OPTD 19 19 19 23 23 23

RESISTIVE REACH ZM1(R14 X0) EXPT OPTD R-E Y-E B-E R-Y Y-B B-R 27.9% 27.9% 27.9% 7.8% 43.8% 46.5% 46.5% 11.7% ZM2(R14 X0) EXPT OPTD ZM3(R14 X0) EXPT OPTD ZM5(R3 X0) EXPT OPTD

LINE ANGLE ZM1(R4 X3) EXPT OPTD ZM2(R4 X3) EXPT OPTD ZM3(R4 X3) EXPT OPTD ZM5(R2 X2) EXPT OPTD

R-E Y-E B-E R-Y Y-B B-R 13.8% 14.9%

17 17 17 15 15 15 27.6% 27.6%

29 29 29 29 29 29 36.8% 35.3%

37 37 37 38 38 38 10.2% 8.5%

8 8 8 10 10 10

TESTING OF REL 511 RELAYS


STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS LOAD ANGLE = TANGENT = ZONE I SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.457 1.045 2.058 4.704 3.000 4.704 66.39997 2.285246 PIRANA VASANA 17.10.2000

ZONE II SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.915 2.091 3.659 8.364 3.000 5.000

ZONE III SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E 1.220 2.788 4.574 10.454 3.000 5.000

ZONE V SETTING 1 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 0.122

2 3 4 5 6

POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E

0.279 0.366 0.836 0.836 1.255

ZFB TEST KIT CALCULATIONS


REACTIVE REACH Z BOX IS ( X5R0 ) = CTR = 5 ZONE I CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.167 6.24

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR) = 7.3%

% OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 6.7%

ZONE II CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.000

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR) = 13.4%

% OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 13.4% ZONE III CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 0.917

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR)

17.1%

% OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 17.9% ZONE V CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN= Z BOX (R0 X1) = 0.665 0.520

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*X1*100/(Z BOX * CTR) = 17.9%

% OF VOLTAGE FOR P-P FAULTS = 2*X1/(Z BOX * CTR) 21.5%

REACTIVE REACH Z1 EXPT R-E Y-E B-E R-Y Y-B B-R 6.7% 7.3% OPTD 21 21 21 19 19 19 13.4% 13.4% EXPT Z2 OPTD 32 32 32 31 31 31 17.9% 17.1% EXPT Z3 OPTD 49 49 49 52 52 52 21.5% 17.9% EXPT Z5 OPTD 19 19 19 23 23 23

TESTING OF REL 511 RELAYS STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS ZONE I SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.457 1.045 2.058 4.704 3.000 4.704 PIRANA VASANA 17.10.2000

ZONE II SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE 0.915 2.091 3.659 8.364 3.000 5.000

ZONE III SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E 1.220 2.788 4.574 10.454 3.000 5.000

ZONE V SETTING 1 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 0.122

2 3 4 5 6

POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH FAULT RESISTANCE PH-E

0.279 0.366 0.836 0.836 1.255

ZFB TEST KIT CALCULATIONS RESISTIVE REACH Z BOX IS ( X0 R10) = CTR = 5 ZONE I CALCULATION 2.15

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 43.8%

% OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 27.9%

ZONE II CALCULATION

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 46.5%

% OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 27.9% ZONE III CALCULATION

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 46.5%

% OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 27.9%

ZONE V CALCULATION ZBOX (X0 R10) = 2.15

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*RFPE*100/(Z BOX * CTR) = 11.7%

% OF VOLTAGE FOR P-P FAULTS = 2*RFPP/(Z BOX * CTR) 7.8%

RESISTIVE REACH ZM1(R10 X0) EXPT OPTD R-E Y-E B-E R-Y Y-B B-R 27.9% 27.9% 27.9% 7.8% 43.8% 46.5% 46.5% 11.7% ZM2(R10 X0) EXPT OPTD ZM3(R10 X0) EXPT OPTD ZM5(R10 X0) EXPT OPTD

TESTING OF REL 511 RELAYS STATION NAME FEEDER NAME DATE OF TESTING PARAMETERS LOAD ANGLE = TANGENT = ZONE I SETTING 1 2 3 4 5 6 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 ZERO SEQUENCE REACTANCE IN OHMS X0 FAULT RESISTANCE PH-PH RFPP FAULT RESISTANCE PH-E RFPE Z 0.457 1.045 2.058 4.704 3.000 4.704 1.141 66.39997 2.285246 PIRANA VASANA 17.10.2000

ZONE II SETTING POSITIVE SEQUENCE RESISTANCE IN OHMS R1 2 POSITIVE SEQUENCE REACTANCE IN OHMS X1 3 ZERO SEQUENCE RESISTANCE IN OHMS R0 4 ZERO SEQUENCE REACTANCE IN OHMS X0 5 FAULT RESISTANCE PH-PH RFPP 6 FAULT RESISTANCE PH-E RFPE Z ZONE III SETTING POSITIVE SEQUENCE RESISTANCE IN OHMS R1 2 POSITIVE SEQUENCE REACTANCE IN OHMS X1 3 ZERO SEQUENCE RESISTANCE IN OHMS R0 4 ZERO SEQUENCE REACTANCE IN OHMS X0 5 FAULT RESISTANCE PH-PH 6 FAULT RESISTANCE PH-E Z ZONE V SETTING 1 2 POSITIVE SEQUENCE RESISTANCE IN OHMS R1 POSITIVE SEQUENCE REACTANCE 1 1 0.915 2.091 3.659 8.364 3.000 5.000 2.282

1.220 2.788 4.574 10.454 3.000 5.000 3.043

0.122 0.279

IN OHMS X1 ZERO SEQUENCE RESISTANCE IN OHMS R0 4 ZERO SEQUENCE REACTANCE IN OHMS X0 5 FAULT RESISTANCE PH-PH 6 FAULT RESISTANCE PH-E Z 7 LINE ANGLE FOR REV. LINE ZFB TEST KIT CALCULATIONS 3 IMPEDANCE REACH Z BOX IS ( X4R5 ) = CTR = 5 ZONE I CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.167 3.309

0.366 0.836 0.836 1.255 0.305 66.41507

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 14.9%

% OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 13.8%

ZONE II CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 1.000

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 27.6%

% OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 27.6% ZONE III CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN = 0.917

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 35.3%

% OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 36.8% ZONE V CALCULATION COMPENSATION FACTOR,KN = (X0 - X1) / 3X1 KN= Z BOX (R2 X2) = 0.665 1.200

% OF VOLTAGE FOR P-E FAULTS = (1+KN)*Z1*100/(Z BOX * CTR) = 8.5%

% OF VOLTAGE FOR P-P FAULTS = 2*Z1/(Z BOX * CTR) 10.2%

REACTIVE REACH ZM1(R4 X3) EXPT OPTD R-E Y-E B-E R-Y Y-B B-R 13.8% 27.6% 36.8% 10.2% 14.9% 21 21 21 27.6% 35.3% 8.5% ZM2(R4 X3) EXPT OPTD ZM3(R4 X3) EXPT OPTD ZM5(R2 X2) EXPT OPTD

You might also like