Scribd
Upload
94 views1 page

250w Datasheet: Specification Tolerance

This document provides specifications for a 250W solar panel module. The module contains 60 mono-crystalline solar cells connected in series. It is rated to operate at 250W power output with a voltage of 30V and current of 8.33A. The panel can withstand operating temperatures from -45 to 80 degrees Celsius, hail up to 25mm in diameter, and wind pressures up to 24m/s. Connection is via an RH701 connector.

Uploaded by

Steven Burns
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views1 page

250w Datasheet: Specification Tolerance

This document provides specifications for a 250W solar panel module. The module contains 60 mono-crystalline solar cells connected in series. It is rated to operate at 250W power output with a voltage of 30V and current of 8.33A. The panel can withstand operating temperatures from -45 to 80 degrees Celsius, hail up to 25mm in diameter, and wind pressures up to 24m/s. Connection is via an RH701 connector.

Uploaded by

Steven Burns
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

250w Datasheet

Specification Cells Number of cells Typical application Maximum voltage Size Weight Front glass Mono crystal 156x156 mm2 60(6x10) series connected 24V DC 1000V DC 1650(L) x 992(W) x45(H) mm 22Kgs 3.2 mm Parameter Rating Model power (Pm) DSP250M 250W 17 % 3% Efficiency of cell Tolerance Rated current (Im) 8.33A Rated voltage (Vm) 30.0V

Tolerance Parameter Operating temperature Hail diameter @ 80Km/h Continuous wind pressure Values -45-80 Up to 25 Up to 24 Unit

mm m/s

Connection terminals Connector type RH701

Short circuit Current (Isc) 8.57A

Open circuit Voltage (Voc) 38.6V

Temperature coefficient Voltage: 0.16V/ / -(160 +10)mV/ NOCT:45+2 Temperature coefficient of power: -(0.5+0.05)%/ Temperature coefficient Current: 0.06%/ / (0.065 +0.015)%/ Note: defined as standard deviation of thousands measurements.Absolute power values depend on the measuring system.They can differ by +/- 3% from one measuring system to another.

You might also like