Scribd
Upload
311 views3 pages

Caedp Paper

The document contains instructions for drawing multi-view projections of various 3D geometric shapes including prisms, pyramids, cones and cylinders. The shapes are described by their dimensions and how they are oriented in relation to the visible, horizontal and vertical planes. The instructions specify drawing front, top and side views of each object based on their given positions and orientations.

Uploaded by

Krishna Murthy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
311 views3 pages

Caedp Paper

The document contains instructions for drawing multi-view projections of various 3D geometric shapes including prisms, pyramids, cones and cylinders. The shapes are described by their dimensions and how they are oriented in relation to the visible, horizontal and vertical planes. The instructions specify drawing front, top and side views of each object based on their given positions and orientations.

Uploaded by

Krishna Murthy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

1.

A hexagonal prism with side of base 30mm and axis 70mm long is resting on one of its rectangular face on HP, with its axis inclined to 40 to VP. Draw its projections. 2. Draw the projections of a cone of base diameter 40mm and axis 60mm when the axis is parallel to VP and resting on a generator in HP. 3. A triangular prism with side of base 40mm and height 65mm is resting on a corner of its base on HP, with a longer edge containing that corner inclined at 45to HP. Draw its projections. 4. Draw front view, top view and side views of the following figure

1. Draw the projections of the cylinder of diameter 60mm and axis length 75mm, lying on VP on a point of its rim with its axis inclined to 300 to VP. 2. A square pyramid of base edge 40mm and axis height 40mm is resting on an edge of the base in HP and the axis inclined at 300 to HP. Draw its projections when the axis is 30mm in front of VP. 3. A square pyramid of 40 mm side and height 50mm rests centrally on a square block of 60 mm edges and 20 mm thick. Draw the isometric projections of the composite solid with the edges of the two blocks equally inclined to each other. 4. Draw front view, top view and side views of the following figure .

1. A pentagonal pyramid of base edge 40mm and axis height 40mm is resting on an edge of the base in HP and the axis inclined at 450 to HP. Draw its projections when the axis is 40mm in front of VP. 2. Draw the projections of the cylinder of diameter 60mm and axis 90mm long when its axis is parallel to HP and inclined at 30to VP. 3. Draw the projections of a cone resting on a point of its base circle in VP and axis inclined at 450 to VP. The base circle diameter of the cone is 50mm and axis is 60mm long and is parallel to HP. 4. Draw front view, top view and side views of the following figure .

You might also like