Scribd
Upload
732 views1 page

2.-Product's CE Certificate (STEELGRID HR 30 8x10-2,70)

This document provides information on a double twisted wire mesh product with inserted wire ropes intended for unstable slope containment and prevention of rockfalls. It lists the product name and type, intended use, and details the manufacturing plant's inspection and certification. Performance characteristics of the mesh such as wire diameter, tensile strength, corrosion protection, mesh tensile strength, and load bearing capacity are declared and conform to the required European technical standards.

Uploaded by

Nita Bogdan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
732 views1 page

2.-Product's CE Certificate (STEELGRID HR 30 8x10-2,70)

This document provides information on a double twisted wire mesh product with inserted wire ropes intended for unstable slope containment and prevention of rockfalls. It lists the product name and type, intended use, and details the manufacturing plant's inspection and certification. Performance characteristics of the mesh such as wire diameter, tensile strength, corrosion protection, mesh tensile strength, and load bearing capacity are declared and conform to the required European technical standards.

Uploaded by

Nita Bogdan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Declaration of Performance

No.: STEELGRID HR 30 8x10 2.7 GL 8 Rope-EN-001DOP-0911-20130701


Product Name:
DOUBLE TWISTED WIRE MESH WITH INSERTED
WIRE ROPES
Product Type:

STEELGRID HR 30 8x10 2,7 GL + 8mm Rope

Intended use:
Unstable slopes containment, control and prevention of rockfalls and loose debris flow along roads, highways and railways

Officine Maccaferri Spa


Via J. F. Kennedy, 10
40069 Zola Predosa (BO) - Italy
www.officinemaccaferri.com

AVCP:
System 2+
European Technical Assessment:
TSUS, Technicky a Skusobny Ustav Stavenbny 1301
issued ETA 13/0524
on the basis of CUAP N 01.06/11

performed initial inspection of the manufacturing plant and of factory production control and the continuous surveillance, assessment
and evaluation of factory production control, and issued the certificate of conformity of the FPC (Factory Production Control)
no. 0911

under system 2+

Declared performance

Essential characteristics
Performance

Test standard

European Technical
Approval
Mean value

Tolerance

Mesh Type

8x10

0mm; +10mm

EN 10223-3

13/0524

Wire diameter

2,70 mm

EN 10218-2

EN 10218-2

Wire tensile strength



350 500 N/mm
2


EN 10218-2

EN 10218-2

Corrosion protection of the wire



Galmac class A

EN 10244-2

EN 10244-2

Rope diameter

8 mm

EN 12385-4

EN 12385-4

Corrosion protection of rope



Galmac class A

EN 10264-2

EN 10264-2

Mesh tensile strength



180 kN/m

10

\

Elongation of mesh at break



7,2 %

0,5

CUAP 01.06/11

Load bearing at capacity



155kN

12

CUAP 01.06/11

Maximum elongation at bearing force



400 mm

50

CUAP 01.06/11
The performance of the product identified above is in conformity with the declared performance.
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.

Signed for and on behalf of the manufacturer by: Eng. Francesco Ferraiolo Technical Director

Zola Predosa (BO) 01/07/2013 .... (signature)

You might also like