Scribd
Upload
50 views2 pages

Department of Civil Engineering 10/11 Universiti Malaya Kaea 1121 - Engineering Mechanics Solutions To Tutorial Questions

This document contains solutions to tutorial questions on engineering mechanics. It includes equilibrium reactions for beams under various loading conditions. It also includes calculations of section properties like moments of inertia for different cross sections. Finally, it summarizes the analysis of frames and beams, including shear force and bending moment diagrams with maximum values.

Uploaded by

Aztec Mayan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
50 views2 pages

Department of Civil Engineering 10/11 Universiti Malaya Kaea 1121 - Engineering Mechanics Solutions To Tutorial Questions

This document contains solutions to tutorial questions on engineering mechanics. It includes equilibrium reactions for beams under various loading conditions. It also includes calculations of section properties like moments of inertia for different cross sections. Finally, it summarizes the analysis of frames and beams, including shear force and bending moment diagrams with maximum values.

Uploaded by

Aztec Mayan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

DEPARTMENT OF CIVIL ENGINEERING

UNIVERSITI MALAYA

10/11

KAEA 1121 ENGINEERING MECHANICS


SOLUTIONS TO TUTORIAL QUESTIONS
1.

EQUILIBRIUM & SUPPORT REACTIONS

1a). RB = 5.67 kN, RA = 8.33 kN, (1b) RB = 29 kN, RA = 12 kN, (1c) RB = 8.75 kN, RA = 13.25 kN
1d) RB = 107.25 kN, RA = 242.75 kN (1e) RB = 231.875 kN, RA = 523.15 kN
1f) VA = 65 kN, VB = 95 kN , HA = -30 kN (1g) HA = -24 kN , VA = 104.9 kN, VB = 73.1 kN
1h) VA = 121.875 kN, VB = 178.125 kN , (2a) VA = 6.0 kN, HA = 0 kN, MA = 9.0 kNm
2b) VA = 0 kN, HA = 5 kN, MA = 10.0 kNm (3) HA = 6.67 kN, VA = 33.33 kN, RA = 34.0 kN @ 78.7o hor,
HD = 6.67 kN, VD = 6.67 kN, RD = 9.43 @ 45o horizontal,
2.

PROPERTIES OF SECTION
a)
b)
c)
d)
e)
f)
g)

3.

x = 50 mm, y = 67.78 mm, Ixx = 3.142 x 106 mm4, Iyy = 1.732 x 106 mm4
y = 75 mm, x = 300 mm, Ixx = 260.42 x 106 mm4, Iyy = 2417 x 106 mm4
y = 118.3mm, x = 200 mm, Ixx = 762.28 x 106 mm4, Iyy = 806.25 x 106 mm4
y = 49.5 mm, x = 24.5 mm, Ixx = 6.55 x 106 mm4, Iyy = 2.37 x 106 mm4
Ixx = 141.27 x 106 mm4, Iyy = 10.82 x 106 mm4
Ixx = 5600 x 106 mm4, Iyy = 2900 x 106 mm4
x = 33.7 mm, y = 32.1 mm, Ixx = 2.11 x 106 mm4, Iyy = 2.98 x 106 mm

SUSPENSION CABLE AND THREE PINNED STRUCTURES

1a) VA= 9.4 kN, HA= 9.89 kN, VC= 3 kN, HC= 14.67 kN, RA= 13.63 kN, RC= 14.97 kN
1b) VA = VE = 8 kN, HA= HE = 4 kN, RA = RE = 8.94 kN,
2a) x = 33.33 m, HA= 1111 kN, VA =333.33kN, TA = 1160 kN, HB= 1111 kN, VB = 666.67, TB = 1296 kN
2b) HA = HB = TO = 1250 kN, VA = VB = 500 kN, Tmax = TA = TB = 1346 kN
4.

ANALYSIS OF FRAMES
3) RA = RB = 35.0 kN
TEF = 45 kN (C), TEL = 7.07 kN (T), TKL = 40 kN (T)
4) TAC = 39 kN (T), TBD = 15 kN (C), TBC = 31.42 kN (C)
5) VA = 9 kN, VE = 15 kN, HA = 8 kN
TBC = 12 kN (C), THG = 14 kN (T), TBG = 10.82 kN (T), TDG = 18.03 kN (T)

T Tension, M = Compression
5.

BEAM ANALYSIS TUTORIAL

1) RB = 30 kN, RD = 60 kN, Mmax span BD = 30 kNm (sagging),


Mmax span DE = 50 kNm (hogging), Point of contraflexture (PCF) = 1.75m from B
2) RA = 40 kN, RC = 20 kN, V = 0, 2.67 m from A, Mmax = 53.3 kNm (2.67 m from A)
3) RA = 13 kN, RB = 15 kN, Mmax = 45 kNm (9 m from A)
4) RA = 52.5 kN, RB = 82.5 kN, V=0 @ 2.75 m from B, Mmax = 113.4 kNm (2.75 m from B)
5) VA = 7 kN, MA = -10 kNm (hogging) , Mmax = 10 kNm at build in at A
6) VA = 17 kN, MA = -97 kNm (hogging), Mmax = -97 kNm at build in at A
7) RA = 17.5 kN, RB = 32.5 kN, V = 0, 1.75 m from A, Mmax (sagging) span AB = 15.3 kNm @ 1.75 m
from A, Mmax (hogging) span BC = 10 kNm at support B, PCF = 3.5 m from A
8) RA = 14.6 kN, RB = 19.4 kN, V = 0, 4.87 m from A, , Mmax (sagging) span AB = 35.5 kNm @ 4.87 m
from A, Mmax (sagging) span BC = 4 kNm at support B, PCF = 9.73 m from A
9) RA = 6.9 kN, RE = 7.9 kN, HA = -9.2 kN , HAB = +9.2 kN (T), HBC = +9.2 kN (T),
HCD = +5.7 kN (T), HDE = 0, Mmax = 51 kNm (10 m from A)

You might also like