Scribd
Upload
2K views

Soft Foot Correction

The document provides instructions for correcting diagonal soft foot issues by calculating the difference between the highest and lowest soft foot values, multiplying that difference by 0.8, dividing by 2, and placing a shim of that thickness under each foot with the high soft foot values.

Uploaded by

Jaime Berry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Soft Foot Correction

The document provides instructions for correcting diagonal soft foot issues by calculating the difference between the highest and lowest soft foot values, multiplying that difference by 0.8, dividing by 2, and placing a shim of that thickness under each foot with the high soft foot values.

Uploaded by

Jaime Berry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIAGONAL SOFTFOOT CORRECTION

(PLEASE NOTE: This formula is for diagonal soft foot problems only)

Add the soft foot values of the highest feet: 0.024 + 0.015 = 0.039 Add the soft foot values of the lowest feet: 0.003 + 0.001 = 0.004 Subtract the lowest, from the highest: 0.039 0.004 = 0.035 Multiply by 0.8: 0.035 x 0.8 = 0.028 Divide these results by 2: 0.028 / 2 = 0.014

Place a 0.014 shim under each of the feet with the high softfoot values

Visit us online at: www.servicebypinnacle.com

You might also like