Scribd
Upload
159 views1 page

CPX310R

This product data sheet summarizes the specifications of the CPX310R 824-960MHz dual polarization remote tilt panel antenna. The antenna operates within a frequency range of 824-960MHz with a gain of 18dBi. It has dual slant polarization of ±45 degrees and mechanical downtilt can be adjusted between 0 and 10 degrees. Environmental ratings include a maximum wind velocity of 200km/h and operating temperatures between -40°C to +70°C. Mounting options include adjustable clamps, fixed clamps, and headframes.

Uploaded by

Muhammad Fahad Hafeez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views1 page

CPX310R

This product data sheet summarizes the specifications of the CPX310R 824-960MHz dual polarization remote tilt panel antenna. The antenna operates within a frequency range of 824-960MHz with a gain of 18dBi. It has dual slant polarization of ±45 degrees and mechanical downtilt can be adjusted between 0 and 10 degrees. Environmental ratings include a maximum wind velocity of 200km/h and operating temperatures between -40°C to +70°C. Mounting options include adjustable clamps, fixed clamps, and headframes.

Uploaded by

Muhammad Fahad Hafeez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Data Sheet CPX310R

824-960MHz Dual Polarization Remote Tilt Panel Antenna


Electrical Specifications
Frequency Range 824 - 960 MHz
Gain 18 dBi
Return Loss > 15 dB
Polarization Dual Slant 45
Horizontal Beamwidth 65
Vertical Beamwidth 7 with nullfill
Electrical Downtilt 0 - 10 independently continously adjustable
Upper Sidelobe Level < -18 dB
Isolation Between Ports > 30 dB
Front to Back Ratio > 25 dB
Power Rating 500W
Intermodulation < -150 dBc (2 x 43 dBm)
Impedance 50 ohm
Lightning Protection DC grounded
Connector Type 7-16 DIN female
RET type Internal motor & manual override
RET Interface AISG1 Remotely upgradeable
RET Connector Single AISG1 8 pin male
Mechanical Specifications
Antenna Dimensions 2630x300x110 mm
Antenna Weight 23 kg
Packed Dimensions 2760x330x200 mm
Radome Material Polyester Fibreglass pultrusion
Maximum Environmental Ratings
Rated Wind Velocity 200 km/h
Humidity 95% RH @ +30C
Rain 140 mm per hour
Lateral Loading (Front) 1.04 kN @ 160 km/h
Lateral Loading (Rear) 1.13 kN @ 160 km/h
Temperature -40C to +70C
Mounting Options
T-029-GL-E Adjustable clamps
F-042-GL-E Fixed clamps
HC-10 3-Sector Head-Frame
HC-10-P 3-Sector Head-Frame
Azimuth Elevation
Last Updated: 16-02-2007

You might also like