Scribd
Upload
3K views2 pages

Ansul - Discharge Nozzle - 4in. Multi-Discharge Type

The 4 in. Multi-discharge Nozzle is used only for total flooding applications. The nozzle insert is brass and the remainder of the nozzle is steel. Nozzle is painted red with chrome or nickel plating available as an option.

Uploaded by

Elieser Júnio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views2 pages

Ansul - Discharge Nozzle - 4in. Multi-Discharge Type

The 4 in. Multi-discharge Nozzle is used only for total flooding applications. The nozzle insert is brass and the remainder of the nozzle is steel. Nozzle is painted red with chrome or nickel plating available as an option.

Uploaded by

Elieser Júnio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Carbon Dioxide System Components

Discharge Nozzle 4 in. Multi-Discharge Type


Description
The 4 in. multi-discharge nozzle is used only for total flood-
ing applications. The nozzle insert is brass and the remain-
der of the nozzle is steel. The nozzle is available in orifice
sizes ranging from 2 through 18. The dischargerate of the
nozzle depends on the orifice size and the nozzle pressure.
The nozzle is painted red with chrome or nickel plating
available as an option.
ANSUL
Component Material Thread Size/Type Orifice Size Approvals
4 in. MD Nozzle Nozzle: 1/2 in. NPT Female 2 through 4.5 U.S. Coast Guard (162.038/7/0)
w/Strainer Steel UL (EX-2968)
Insert: FM Approved
Brass
4 in. MD Nozzle Nozzle: 1/2 in. NPT Female 5 through 10 U.S. Coast Guard (162.038/7/0)
Steel UL (EX-2968)
Insert: FM Approved
Brass
4 in. MDL Nozzle Nozzle: 3/4 in. NPT Female 8 through 18 U.S. Coast Guard (162.038/7/0)
Steel UL (EX-2968)
Insert: FM Approved
Brass
1-16
Shipping Assembly
Part No. Description Orifice Code
426106 4 in MD nozzle with strainer 2 4.5
426107 4 in MD nozzle 5 10
426108 4 in MD nozzle 8 18
NOTE: When ordering, specify orifice code required: Example Part No. 426107 6.5.
ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-90221-2 1998 Ansul Incorporated Litho in U.S.A.
Multi-Discharge Nozzle 4 MD with Strainer
Multi-Discharge Nozzle 4 MD and 4 MDL
STRAINER
METAL HORN
BRASS NOZZLE
INSERT
CODE NO. OF ORIFICE
STAMPED ON CONNECTOR
1/2 IN. NPT
5 13/16
(13.1 cm)
3 1/2 IN.
(8.8 cm)
METAL HORN
BRASS NOZZLE
INSERT
CODE NO. OF ORIFICE
STAMPED ON CONNECTOR
1/2 IN. OR 3/4 IN. NPT
(SEE TABLE)
5 13/16
(13.1 cm)
3 1/2 IN.
(8.8 cm)
001831a
001831b
001835a
ANSUL is a registered trademark.
001835b

You might also like