Scribd
Upload
139 views1 page

Lexan® 3412R Resin: Property Nominal Values Test Method

This document provides property information for Lexan 3412R Resin including physical properties, electrical properties, impact resistance, mechanical properties, thermal properties, and flame characteristics. Key properties include a specific gravity of 1.35, water absorption of 0.16%, volume resistivity greater than 1x10^17 Ohm-cm, an Izod impact of 1014 J/m, a tensile stress at break of 110 MPa, a Vicat softening temperature of 165°C, and UL flame class ratings of V-1 at 1.47mm and V-0 at 2.99mm thickness. The document lists nominal property values and the test methods used to obtain them.

Uploaded by

Deena Mcgee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views1 page

Lexan® 3412R Resin: Property Nominal Values Test Method

This document provides property information for Lexan 3412R Resin including physical properties, electrical properties, impact resistance, mechanical properties, thermal properties, and flame characteristics. Key properties include a specific gravity of 1.35, water absorption of 0.16%, volume resistivity greater than 1x10^17 Ohm-cm, an Izod impact of 1014 J/m, a tensile stress at break of 110 MPa, a Vicat softening temperature of 165°C, and UL flame class ratings of V-1 at 1.47mm and V-0 at 2.99mm thickness. The document lists nominal property values and the test methods used to obtain them.

Uploaded by

Deena Mcgee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

510 Gilmore Ave.

, Suite C
Stockton, CA 95203
Ph: 800-590-PLAS Fax: 209-464-5760

Lexan 3412R Resin

PROPERTY NOMINAL VALUES TEST METHOD
Physical

Specific Gravity 1.35 ASTM D792
Density 1.356 g/cm
3
ASTM D792
Water Absorption, 24 hours 0.16 % ASTM D570
Water Absorption, equilibrium, 23C 0.29 % ASTM D570
Electrical

Volume Resistivity >1.E+17 Ohm-cm ASTM D257
Dielectric Strength, in air, 3.2 mm 19.2 kV/mm ASTM D149
Relative Permittivity, 50/60 H
z
3.17 ASTM D150
Relative Permittivity, 1 MH
z
3.13 ASTM D150
Comparative Tracking Index (UL) 5 PLC Code UL 746A
Impact

Izod Impact, unnotched, 23C 1014 J/m ASTM D4812
Izod Impact, notched, 23C 106 J/m ASTM D256
Tensile Impact, Type S 63 kJ/m
2
ASTM D1822
Falling Dart Impact, 23C 5 J ASTM D3029
Mechanical

Tensile Stress, break (Type I, 5 mm/min) 110 MPa ASTM D638
Tensile Strain, break (Type I, 5 mm/min) 5 % ASTM D638
Flexural Stress, yield (1.3 mm/min, 50 mm span) 131 MPa ASTM D790
Flexural Modulus (1.3 mm/min, 50 mm span) 5510 MPa ASTM D790
Hardness, Rockwell M 91 ASTM D785
Hardness, Rockwell R 122 ASTM D785
Thermal

Vicat Softening Temp. Rate B/50 165 C ASTM D1525
Thermal Conductivity 0.21 W/m-C ASTM C177
Relative Temp Index, Elec 130 C UL 746B
Relative Temp Index, Mech w/impact 130 C UL 746B
Relative Temp Index, Mech w/o impact 130 C UL 746B
Flame Characteristics

UL Recognized, 94V-1 Flame Class Rating 1.47 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 2.99 mm UL 94
UL Recognized, 94-5VA Rating 2.99 mm UL 94
*Lexan is a registered trademark of General Electric Company
**Flame characteristics not intended to reflect hazards under actual fire conditions.
***Typical values only. Actual properties of individual batches will vary within specification limits.

You might also like