Scribd
Upload
28 views1 page

Bose Quiet Comfort 15

The document provides measurement data for the Bose Quiet Comfort 15 headphones including frequency response, isolation, impedance, distortion, and impulse response. Graphs show measurements for attenuation, electrical impedance, square waves, and distortion over a range of frequencies.

Uploaded by

LokiLongbow
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views1 page

Bose Quiet Comfort 15

The document provides measurement data for the Bose Quiet Comfort 15 headphones including frequency response, isolation, impedance, distortion, and impulse response. Graphs show measurements for attenuation, electrical impedance, square waves, and distortion over a range of frequencies.

Uploaded by

LokiLongbow
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Bose Quiet Comfort 15

Headphone Measurements:

Frequency Response

Isolation

Top - Compensated and Averaged


Bottom - Raw Data for Five Headphone Positions

Attenuation of External Sound vs. Frequency


10
5
0
-5
Reduction in dB

Amplitude (dB)

20
15
10
5
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50

-10
-15
-20
-25
-30
-35
-40
-45
-50

10

100

1000

10000

100000

10

100

1000

Frequency

10000

100000

Frequency

Electrical Impedance and Phase


Measured with 600 Ohm output impedance.

30 Hz Square Wave

50000

0.05

60

0.04

40

35000

20

30000
25000

20000
-20

15000
10000

-40

5000

0.03
0.02
0.01

Volts

40000

Phase in Degrees

Impedance in Ohms

45000

-0.01
-0.02
-0.03
-0.04

0
10

100

1000

-60
100000

10000

Frequency

Impedance

-0.05
0.00

0.01

0.02

0.03

0.04

0.05

0.06

0.07

Time in Seconds

Phase

0.08

Right

0.09

0.10

Left

300 Hz Square Wave

%THD+noise @ 90dB and 100dB


100

0.04
0.03
0.02
0.01
Volts

%THD+noise

10

-0.01
-0.02

0.1

-0.03
0.01
10

100

1000

10000

100000

Frequency

Left 90dB

Right 90dB

Left 100dB

Right 100dB

-0.04
0.000

0.001

0.002

0.003

0.004

0.005

0.006

0.03

0.02

0.01

-0.01

-0.02

-0.03
0.0000

0.0003

0.0006

0.0009

0.0012

0.0015

0.0018

0.0021

0.0024

0.0027

0.008
Right

Volts RMS required to reach 90dB SPL:


Impedance @ 1kHz:
Power Needed for 90d BSPL
Broadband Isolation in dB (100Hz to 10kHz):

Impulse Response

0.007

0.009

Time in Seconds

0.0030

Time in Seconds

Copyright SOURCE INTERLINK MEDIA All rights reserved.

0.074
2001
0.00
-26

Vrms
Ohms
mW
dBr

Left

0.010

You might also like