Scribd
Upload
308 views

Staad Auto Load Combination

This document provides steps for automatically generating load combinations in STAAD PRO using Indian code specifications. The user first selects load cases such as dead, live, and seismic loads. Then different rules are defined that specify load multipliers for each case. Finally, the user applies an automatic load combination which generates all the possible load combinations from the rules as specified by the Indian code.

Uploaded by

Anonymous 48jYxR1C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
308 views

Staad Auto Load Combination

This document provides steps for automatically generating load combinations in STAAD PRO using Indian code specifications. The user first selects load cases such as dead, live, and seismic loads. Then different rules are defined that specify load multipliers for each case. Finally, the user applies an automatic load combination which generates all the possible load combinations from the rules as specified by the Indian code.

Uploaded by

Anonymous 48jYxR1C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STAAD PRO

AUTOMATIC LOAD COMBINATION



Steps involved:
1. Select the Load cases.
2. Apply the auto load combination

1.Select the Load Cases:

Main menu Commands Loading Edit Auto Loads Select Indian
Code.
Select New category.
Category name: say EQ
No. of Rule : 4

Rule Dead Live Seismic
1 1.5 1.5 ---
2 1.5 --- 1.5
3 1.2 1.2 1.2
4 0.9 --- 1.5

Click update table Close.

2. Apply the Auto Load Combination:
Main menu Commands Loading Auto Load comb (OR)
Load case details Add Auto Load Combination .
Select Indian Code.
Category : EQ Generate Loads Add Close.

This will create various load combination on DL, LL and EQ as per
IS1893 . Similarly we can create auto load for Wind by selecting
wind instead seismic load.

You might also like