Scribd
Upload
128 views2 pages

Design Criteria and Specifications (Wind Analysis) : Wind Load Analysis A.C.P.R. A.P.D. 03/27/14

This document outlines the wind load analysis for a building with the following specifications: it is located in Zone II with an exposure of B, has a height of 19 meters, and dimensions of 60m x 32.4m. The wind direction, occupancy, and other factors are defined. Wind loads are then calculated for the windward and leeward sides of the building at various heights and locations, considering factors like wind speed, pressure coefficients, and tributary area. Force values are presented.

Uploaded by

Joshua Edward Lagasca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
128 views2 pages

Design Criteria and Specifications (Wind Analysis) : Wind Load Analysis A.C.P.R. A.P.D. 03/27/14

This document outlines the wind load analysis for a building with the following specifications: it is located in Zone II with an exposure of B, has a height of 19 meters, and dimensions of 60m x 32.4m. The wind direction, occupancy, and other factors are defined. Wind loads are then calculated for the windward and leeward sides of the building at various heights and locations, considering factors like wind speed, pressure coefficients, and tributary area. Force values are presented.

Uploaded by

Joshua Edward Lagasca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

WIND LOAD ANALYSIS

A.C.P.R.
A.P.D.
03/27/14


Design Criteria and Specifications
(Wind Analysis)


Wind Direction: Normal to transverse, parallel to longitudinal

Occupancy: Standard Occupancy

Location: Zone II

Exposure: B

Height of Building: 19.00 m

V: 200 kph
Iw: 1.00
kzt: 1.00
kd: 0.85
kz: 0.78

Gust effect factor: 0.85

External Wall Pressure Coefficient, Cp:

Windward walls: 0.80
Leeward walls: -0.50

Internal Wall Pressure Coefficient, Cpi:

Windward walls: 0.55
Leeward walls: -0.55


Velocity Pressure, kPa;

Wind Load, KPa; P = qz (GCp-Gcpi)

Wind Force, KN; F = P (Tributary Area)

L = 60m
B = 32.4m
L/B = 1.85









WIND LOAD ANALYSIS
A.C.P.R.
A.P.D.
03/27/14


LONGITUDINAL SECTION OF FRAME



TRAVERSE SECTION OF FRAME


Windward Leeward Windward Leeward
Base Height Windward Leeward
2nd Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 7.50 5.00 57.86 -45.86 12.00
3rd Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 7.50 3.50 40.50 -32.10 8.40
4th Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 7.50 3.50 40.50 -32.10 8.40
5th Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 7.50 3.50 40.50 -32.10 8.40
Roof Deck
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 7.50 3.50 40.50 -32.10 8.40
FRAME 1,7
qz G
Tribut ary Area
F
TOTAL F
Cp
GCpi
P
Windward Leeward Windward Leeward
Base Height Windward Leeward
2nd Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 5.40 5.00 41.66 -33.02 8.64
3rd Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 5.40 3.50 29.16 -23.12 6.04
4th Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 5.40 3.50 29.16 -23.12 6.04
5th Floor
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 5.40 3.50 29.16 -23.12 6.04
Roof Deck
1.25 0.85 0.80 -0.50 0.55 -0.55 1.54 -1.22 5.40 3.50 29.16 -23.12 6.04
FRAME 1,7
qz G
Tribut ary Area
F
TOTAL F
Cp
GCpi
P

You might also like