Scribd
Upload
169 views49 pages

Aspire 4741 Disassembly Guide

This document provides step-by-step instructions for disassembling an Aspire 4741 Series laptop for maintenance or troubleshooting. It details removing external modules like the battery, SD card, and back cover. It then explains taking apart the main unit by removing internal components such as RAM, hard drive, wireless cards, and optical drive. Finally, it describes separating the upper and lower laptop cases. The goal is to divide the disassembly into stages and provide clear steps to avoid damaging hardware components.

Uploaded by

Jessie Bechayda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
169 views49 pages

Aspire 4741 Disassembly Guide

This document provides step-by-step instructions for disassembling an Aspire 4741 Series laptop for maintenance or troubleshooting. It details removing external modules like the battery, SD card, and back cover. It then explains taking apart the main unit by removing internal components such as RAM, hard drive, wireless cards, and optical drive. Finally, it describes separating the upper and lower laptop cases. The goal is to divide the disassembly into stages and provide clear steps to avoid damaging hardware components.

Uploaded by

Jessie Bechayda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 49

Aspire 4741 Series

Service Guide

PRINTED IN TAIWAN
Service guide files and updates are available
on the ACER/CSD web; for more information,
please refer to http://csd.acer.com.tw
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 27
This chapter contains step-by-step procedures on how to disassemble the notebook computer for
maintenance and troubleshooting.
Disassembly Requirements
To disassemble the computer, you need the following tools:
Wrist grounding strap and conductive mat for preventing electrostatic discharge
Flat screwdriver
Philips screwdriver
Hex screwdriver
Plastic flat screwdriver
Plastic tweezers
NOTE: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components.
Chapter 3
Machine Disassembly and Replacement
Downloaded from www.Manualslib.com manuals search engine
28 Chapter 3
General Information
Pre-disassembly Instructions
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Place the system on a flat, stable surface.
4. Remove the battery pack.
Disassembly Process
The disassembly process is divided into the following stages:
External module disassembly
Main unit disassembly
LCD module disassembly
The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence.
Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you
want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly
frame in that order.
Main Screw List
Item Screw Color Part No.
A M2.5 x L5 Black 86.00F87.735
B M2 x L3 Black 86.00F80.723
C M3 x L4 Silver 86.9A524.4R0
D M2.5 x L4 Silver 86.00H36.534
E M2.5 x L6 Black 86.00E12.536
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 29
External Module Disassembly Process
External Modules Disassembly Flowchart
The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you
on the components that need to be removed during servicing. For example, if you want to remove the main
board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
Item Screw Color Part No.
B M2 x L3 Black 86.00F80.723
C M3 x L4 Silver 86.9A524.4R0
E M2.5 x L6 Black 86.00E12.536
Downloaded from www.Manualslib.com manuals search engine
30 Chapter 3
Removing the Battery Pack
1. Turn base unit over.
2. Slide the battery lock/unlock latch to the unlock position.
3. Slide the battery release latch to the release position to pop out the battery pack, then remove the battery
pack from the main unit.
Note: Battery has been highlighted with the yellow circle as above image shows. Please detach the
battery and follow the local regulations for disposal.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 31
Removing the SD Dummy Card
1. Push the SD dummy card all the way in to eject it.
2. Pull SD dummy card out from the slot.
Downloaded from www.Manualslib.com manuals search engine
32 Chapter 3
Removing the Back Cover
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. Remove the four captive screws securing the back cover.
4. Use a flat screwdriver to pry open the back cover and detach it from the lower case.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 33
Removing the DIMM Modules
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. Push out the latches on both sides of the DIMM socket to release the DIMM modules.
5. Remove the DIMM modules.
Downloaded from www.Manualslib.com manuals search engine
34 Chapter 3
Removing the Hard Disk Drive Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33
5. Remove the one screw (B) securing the hard disk drive module.
6. Lift the hard disk drive module and remove it from the hard disk drive bay.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
Size (Quantity) Color Torque Part No.
M2 x L3 (1) Black 1.6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 35
7. Remove the two screws (C) securing the hard disk to the bracket and remove the hard disk from the
bracket.
Size (Quantity) Color Torque Part No.
M3 x L4 (1) Silver 3.0 kgf-cm 86.9A524.4R0
Downloaded from www.Manualslib.com manuals search engine
36 Chapter 3
Removing the Wireless WAN Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. Remove the one screw (B) securing the wireless WAN module to the system.
7. Disconnect the blue antenna cable from AUX connector and the yellow antenna cable from Main
connector on the wireless WAN module.
Size (Quantity) Color Torque Part No.
M2 x L3 (1) Black 1.6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 37
8. Remove the wireless WAN module from its connector.
NOTE: When attaching the antenna back to the wireless WAN module, make sure the cable are arranged
properly.
Removing the WLAN Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. Remove the label sticker from the WLAN module.
Downloaded from www.Manualslib.com manuals search engine
38 Chapter 3
8. Remove the one screw (B) securing the WLAN module to the system.
9. Disconnect the black antenna cable from MAIN connector and the white antenna cable from AUX
connector on the WLAN module.
Size (Quantity) Color Torque Part No.
M2 x L3 (1) Black 1.6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 39
10. Remove the WLAN module from the WLAN connector.
NOTE: When attaching the antenna back to the WLAN module, make sure the cable are arranged properly.
Removing the Optical Drive Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. Remove the one screw (E) securing the ODD module to the system.
Size (Quantity) Color Torque Part No.
M2.5 x L6 (1) Black 3.0 kgf-cm 86.00E12.536
Downloaded from www.Manualslib.com manuals search engine
40 Chapter 3
9. Slowly pull out the ODD module from the ODD drive bay.
10. Remove the one screw (B) securing the ODD bracket to the ODD module.
Size (Quantity) Color Torque Part No.
M2 x L3 (1) Black 1.6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 41
11. Detach the ODD bracket from the optical disk drive module.
Downloaded from www.Manualslib.com manuals search engine
42 Chapter 3
Main Unit Disassembly Process
Main Unit Disassembly Flowchart
Screw List
Item Screw Color Part No.
B M2 x L3 Black 86.00F80.723
E M2.5 x L6 Black 86.00E12.536
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 43
Removing the Keyboard
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. Release the keyboard from the latches.
10. Turn the keyboard over on the touchpad area.
Downloaded from www.Manualslib.com manuals search engine
44 Chapter 3
11. Disconnect the keyboard cable from its connector (KB1) on the main board and detach the keyboard.
Separating the Upper Case from the Lower Case
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. Remove the two screws (E) from the upper case.
Size (Quantity) Color Torque Part No.
M2.5 x L6 (2) Black 1.6 kgf-cm 86.00E12.536
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 45
11. Detach the power cable from its connector on the main board.
12. Detach the speaker cable from its connector on the main board.
13. Detach the touchpad cable from its connector on the main board.
Downloaded from www.Manualslib.com manuals search engine
46 Chapter 3
14. Remove the nine screws (E) from the lower case.
15. Remove the five screws (B) from the lower case.
Size (Quantity) Color Torque Part No.
M2.5 x L6 (9) Black 3.0 kgf-cm 86.00E12.536
Size (Quantity) Color Torque Part No.
M2 x L3 (5) Black 1. 6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 47
16. Use a plastic screw driver to pry loose the sides of the upper case.
17. Gently detach the upper case from the lower case. Remove the upper case.
Downloaded from www.Manualslib.com manuals search engine
48 Chapter 3
Removing the LCD Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. Detach the microphone cable from its connector on the main board.
12. Detach the LCD cable from its connector and tape on the main board.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 49
13. Remove the four screws (E) from the left and right hinges of the LCD module.
14. Release the microphone cable, WWAN and WLAN antennas from the latches and tapes.
Size (Quantity) Color Torque Part No.
M2.5 x L6 (4) Black 3.0 kgf-cm 86.00E12.536
Downloaded from www.Manualslib.com manuals search engine
50 Chapter 3
15. Carefully pull out the wireless antenna cables from the hole(s).
16. Carefully remove the LCD module from the base unit.
NOTE: When connecting the cable back to the unit, please note that the cable should be routed well.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 51
Removing the Touchpad Board
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. Release the latch and disconnect the the touchpad cable from its connector the touchpad board.
12. Pry to loosen the touchpad board and detach it from the upper case.
WARNING: The touchpad board is glued to the upper case, only remove the touchpad board if it is defective.
Note: Circuit board >10 cm has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.
Downloaded from www.Manualslib.com manuals search engine
52 Chapter 3
Removing the Power Board
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. Remove the one screw (B) securing the power board.
12. Release the latch and disconnect the the power cable from the power board.
Size (Quantity) Color Torque Part No.
M2 x L3 (1) Black 1. 6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 53
13. Release the power board from the latches and detach it from the upper case.
Removing the Left and Right Speaker Modules
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. Remove the screws securing the left and right speaker modules to the lower case.
Downloaded from www.Manualslib.com manuals search engine
54 Chapter 3
12. Release the speaker cables from the tapes and lataches.
13. Detach the left and right speaker modules.
Removing the USB Board Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. Disconnect the USB cable from its connectors on the main board and the USB board.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 55
13. Push the tab that secures the USB board to the lower case in the direction indicated by the arrow.
14. Remove the USB board module from the lower case.
Removing the Bluetooth Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the USB Board Module on page 54.
Downloaded from www.Manualslib.com manuals search engine
56 Chapter 3
13. Disconnect the bluetooth cable from its connector on the main board.
14. Release the bluetooth cable from the tape and latches.
15. Detach the bluetooth module.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 57
Removing the Main Board
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the USB Board Module on page 54.
13. See Removing the Bluetooth Module on page 55.
14. Remove one screw (B) securing the main board in place.
Note: RTC battery has been highlighted with the yellow circle as shown in the figure above. Please
detach the RTC battery and follow local regulations for disposal.
Note: Circuit boards >10 cm has been highlighted with the yellow rectangle as above image shows.
Please detach the Circuit boards and follow local regulations for disposal.
Size (Quantity) Color Torque Part No.
M2 x L3 (1) Black 1.6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
58 Chapter 3
15. Lift the main board gently from the lower case.
16. Carefully remove the main board.
Removing the AC-in Cable Module
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the USB Board Module on page 54.
13. See Removing the Bluetooth Module on page 55.
14. See Removing the Main Board on page 57.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 59
15. Disconnect AC-in cable from its connector on the main board.
16. Detach the AC-in cable module.
Removing the Heatsink Module
NOTE: There are two version of heatsink module. For this section, we are going to use the discrete model.
The UMA version looks like the picture below:
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the USB Board Module on page 54.
13. See Removing the Bluetooth Module on page 55.
Downloaded from www.Manualslib.com manuals search engine
60 Chapter 3
14. See Removing the Main Board on page 57.
15. See Removing the AC-in Cable Module on page 58.
16. Disconnect the heatsink fan cable from its connector from the main board.
17. Remove the six screws securing the heatsink module in the order shown.
NOTE: The Discrete system may be shipped with NVIDIA N11PGE1 VRAM HYNIX Graphic DDRIII 800 1GB or NVIDIA
N11MGE1 VRAM Samsung Graphic DDRIII 800 512MB.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 61
18. Carefully lift up the heatsink module.
Removing the CPU
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the USB Board Module on page 54.
13. See Removing the Bluetooth Module on page 55.
14. See Removing the Main Board on page 57.
15. See Removing the AC-in Cable Module on page 58.
16. See Removing the Heatsink Module on page 59.
Downloaded from www.Manualslib.com manuals search engine
62 Chapter 3
17. Using a flat screwdriver, turn the CPU socket latch counter-clockwise to release the CPU.
18. Lift up carefully to remove the CPU.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 63
NOTE: When installing the CPU, make sure to install the CPU with PIN 1 at the corner as shown.
Downloaded from www.Manualslib.com manuals search engine
64 Chapter 3
LCD Module Disassembly Process
LCD Module Disassembly Flowchart
Screw List
Item Screw Color Part No.
A M2.5 x L5 Black 86.00F87.735
B M2 x L3 Black 86.00F80.723
D M2.5 x L4 Silver 86.00H36.534
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 65
Removing the LCD Bezel
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. Remove the two screw covers from the bottom of the LCD module.
13. Remove the two screws (A) from the LCD module as shown.
Size (Quantity) Color Torque Part No.
M2.5 x L5 3.0 kgf-cm 86.00F87.735
Downloaded from www.Manualslib.com manuals search engine
66 Chapter 3
14. Carefully pry open the LCD bezel and remove it from the LCD panel.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 67
Removing the Web Camera
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the LCD Bezel on page 65.
13. See Removing the Web Camera on page 67.
14. Disconnect the cable from the web camera board.
15. Remove the web camera module from the LCD module back cover.
NOTE: The web camera module is glued to the LCD module back cover, only remove the web camera
module if it is defective.
Downloaded from www.Manualslib.com manuals search engine
68 Chapter 3
Removing the LCD Panel with the Brackets
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the LCD Bezel on page 65.
13. Remove the six screws (D) securing the LCD panel with the brackets to the LCD back cover.
Size (Quantity) Color Torque Part No.
M2.5 x L4 (6) Silver 3.0 kgf-cm 86.00H36.534
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 69
14. Remove the LCD with the brackets from the LCD back cover.
Removing the LCD Brackets
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the LCD Bezel on page 65.
13. See Removing the Web Camera on page 67.
14. See Removing the LCD Panel with the Brackets on page 68.
Downloaded from www.Manualslib.com manuals search engine
70 Chapter 3
15. Remove the four screws (B) securing the left and right LCD brackets to remove the brackets.
Size (Quantity) Color Torque Part No.
M2 x L3 (4) Black 1.6 kgf-cm 86.00F80.723
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 71
Removing the FPC Cable
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the LCD Bezel on page 65.
13. See Removing the Web Camera on page 67.
14. See Removing the LCD Panel with the Brackets on page 68.
15. See Removing the LCD Brackets on page 69.
16. Detach any adhesive tapes and any cable that is glued to the back of the LCD panel.
Downloaded from www.Manualslib.com manuals search engine
72 Chapter 3
17. Disconnect the FPC cable from the LCD panel.
Downloaded from www.Manualslib.com manuals search engine
Chapter 3 73
Removing the Microphone
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the LCD Bezel on page 65.
13. See Removing the Web Camera on page 67.
14. See Removing the LCD Panel with the Brackets on page 68.
15. See Removing the LCD Brackets on page 69.
16. See Removing the FPC Cable on page 71.
17. Remove the microphone cables from the tape holding them in place..
18. Detach the microphone module.
Downloaded from www.Manualslib.com manuals search engine
74 Chapter 3
Removing the Antennas
1. See Removing the Battery Pack on page 30.
2. See Removing the SD Dummy Card on page 31.
3. See Removing the Back Cover on page 32.
4. See Removing the DIMM Modules on page 33.
5. See Removing the Hard Disk Drive Module on page 34.
6. See Removing the Wireless WAN Module on page 36.
7. See Removing the WLAN Module on page 37.
8. See Removing the Optical Drive Module on page 39.
9. See Removing the Keyboard on page 43.
10. See Separating the Upper Case from the Lower Case on page 44.
11. See Removing the LCD Module on page 48.
12. See Removing the LCD Bezel on page 65.
13. See Removing the Web Camera on page 67.
14. See Removing the LCD Panel with the Brackets on page 68.
15. See Removing the LCD Brackets on page 69.
16. See Removing the FPC Cable on page 71.
17. See Removing the Microphone on page 73.
18. Remove the antenna cables from the latches holding them in place..
NOTE: There is no need to remove the antenna unless you really need to replace it.
Downloaded from www.Manualslib.com manuals search engine

You might also like