Scribd
Upload
47 views1 page

Mailam Engineering College Mailam, Villupuram (DT), Pin: 604304 Department of Mechanical Engineering

The document is an engineering test from Mailam Engineering College's Department of Mechanical Engineering. It contains two parts testing students' knowledge of fracture mechanics. Part A consists of 10 short answer questions worth 2 marks each on topics like mixed mode fracture criteria, numerical analysis elements, and crack analysis methods. Part B contains 5 longer answer questions worth 16 marks each, requiring students to derive equations, explain numerical methods, and analyze fracture design parameters.

Uploaded by

Vignesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
47 views1 page

Mailam Engineering College Mailam, Villupuram (DT), Pin: 604304 Department of Mechanical Engineering

The document is an engineering test from Mailam Engineering College's Department of Mechanical Engineering. It contains two parts testing students' knowledge of fracture mechanics. Part A consists of 10 short answer questions worth 2 marks each on topics like mixed mode fracture criteria, numerical analysis elements, and crack analysis methods. Part B contains 5 longer answer questions worth 16 marks each, requiring students to derive equations, explain numerical methods, and analyze fracture design parameters.

Uploaded by

Vignesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Mailam Engineering College

Mailam, Villupuram (Dt), Pin: 604304


(Approved by AICTE, New Delhi, Affiliated to Anna University Chennai &Accredited by TCS )

Department of Mechanical Engineering


ENGINEERING DESIGN
INTERNAL TEST IV

Sub/Code: Engineering Fracture Mechanics / ED 7002


Year / SEM: II/III

Date: 28/10/2014
Time: 3 hrs

PART A (10 2 = 20 Marks)


1. What are the three mixed mode criteria?
2. Draw the fracture surface based on maximum tangential stress criterion.
3. What are the various elements used for numerical method.
4. Draw the crack extension direction for MTS criterion.
5. Why FEA method used for fracture mechanics.
6. What are the two methods used in numerical method.
7. Draw the Mixed mode crack subjected to remote loading.
8. Write about Strain energy density criterion.
9. Define Leak before break analysis
10.Define Rain flow method.

PART B (5 16= 80 Marks)


1.
2.
3.
4.
5.

Derive the modified Griffith Criterion in mixed mode fracture


Explain the numerical method to determine Fracture parameters.
Derive the maximum tangential Stress Criterion in mixed mode fracture
Explain the rain flow method in fracture mechanics.
Explain the thickness as a design parameter in fracture mechanics.

Prepared by
Mr.V.Suresh
(AP/MECH)

Year Coordinator
Ms.J.Hemalatha
(AP/MECH)

Approved by
Dr.R.Rajappan
(H.O.D./MECH)

You might also like