Scribd
Upload
37 views11 pages

Anchorage and Bar Mark

The document provides specifications for checking anchorage lengths of rebar in concrete structures. It gives dimensions for lap lengths, bar diameters, cover, radii of bends, and distances from centers or supports for vertical and U-shaped bars. It also specifies requirements for checking hanger bars on beams, including beam depths, forces, bar diameters, and required number of bars.

Uploaded by

Vasanthapragash Nadarajha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
37 views11 pages

Anchorage and Bar Mark

The document provides specifications for checking anchorage lengths of rebar in concrete structures. It gives dimensions for lap lengths, bar diameters, cover, radii of bends, and distances from centers or supports for vertical and U-shaped bars. It also specifies requirements for checking hanger bars on beams, including beam depths, forces, bar diameters, and required number of bars.

Uploaded by

Vasanthapragash Nadarajha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Checking for Anchorage Length

40

Lap length
Top

width of support/column,D
Minimum width of support required
Cover
Bar Dia
Starting point for Anchorage(Tension Only)
radious of bend

=
=
=
=
=
=

225
210
25
20
112.5
60

Length of vertical bar

700

800

7.5

width of support/column,D
Minimum width of support required
Cover
Bar Dia
Starting point for Anchorage
radious of bend

=
=
=
=
=
=

350
178
25
16
350
48

Length of vertical bar

300

640

261

width of support/column,D
depth of beam
Minimum width of support required
Cover
Bar Dia
Starting point for Anchorage(Tension Only)
radious of bend

=
=
=
=
=
=
=

350
450
178
25
16
128
48

Length of U Bar

722.8

640

39

=
=

261
272

Lap Length/Anchorage
Distance from C/L to Starting
point of Anchorage

>=

>=

>=

Bottom

Lap Length/Anchorage
Distance from Support to Starting
point of Anchorage

For U Bar

Lap Length/Anchorage
Distance from C/L to Starting
point of Anchorage
Distance from Support to Starting
point of Anchorage
Height of U Bar Vertical portion

Checking for Hanger Bars on beam


Depth of Beam
Depth of girder
End reaction on primary beam
Downward force developed
Diameter of Hanger bars
requied amount of hanger bar

=
=
=
=
=
=

400
500
100
80
10
1.3

mm
mm
kN
kN
mm
Numbers

Shear on beam
Vc

=
=

50 kN
49.0 kN

You might also like